Equipment information

YOKOGAWA ELECTRIC CORPORATION TA320 Analyzer
Manufacturer:
Model:
TA320
Date:
1996
Category:
Group:
Description:
Time Interval Analyzer
User Manual
Manual Type:
User Manual
Pages:
144
Size:
1.34 Mbytes (1404727 Bytes)
Language:
english
Revision:
1
Manual-ID:
IM 704210-01E
Date:
1996 12 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2020 12 28
MD5:
96d74e6a0186086c86fea07bb41ba75a
Downloads:
171

Information

This User’s Manual consists of 12 chapters and an Index as described below. Chapter1 Functions Describes the measuring principles and functions of the instrument. No description is given for operating methods, however it is recommended that this chapter be read before operating the instrument to gain a basic understanding of what the instrument can do. Chapter2 Name and Use of Each Part Describes the name and function of each part of the instrument. For keys and rotary knob, reference sections (or page numbers) are also given. Chapter3 Before Starting Measurement Describes usage precautions, how to install the instrument, connect the power cord, turn the power switch ON/OFF, connect a Probe and set the date and time. Chapter4 Common Operations Describes how to start and stop acquisition of a measuring input signal and set a numerical value using the ten-key. Chapter5 Setting the Sampling Mode and Measurement Function (Item) Describes how to set the sampling mode and measurement function (item). Chapter6 Setting the Acquisition Conditions for Input Signal to be Measured Describes how to set the acquisition conditions for the input signal to be measured, including input coupling, input impedance, trigger mode and trigger level, gate type, sample size and sampling interval, arming source, slope, delay types, and inhibit. Chapter7 Displaying the Measured/Computed Data Describes how to display a histogram, time variation, list of measured data and statistic values, and how to set multi-window, panorama display and histogram data addition functions. Chapter8 Storing and Recalling the Set-up Information from the Internal Memory Describes how to store the set-up information to the internal memory and how to recall the stored set-up information and change it. Chapter9 Saving and Loading the Data from a Floppy Disk Describes how to save data such as set-up information, measured/computed results and screen image to a floppy disk, load the saved data, format a floppy disk and delete data. Chapter10 Using Other Functions Describes how to output measured data to a plotter, input/output the reference signal, output monitor signals, initialize the set-up information, calibrate the instrument, set the screen contrast and set the touch key sound. Chapter11 Troubleshooting and Maintenance Describes corrective actions to be taken in case of problems and their causes, describes error messages, how to use the error logging and self-test functions, adjust the time base, carry out the performance test and reset the circuit breaker. Chapter12 Specifications Describes the specifications of the instrument. Index Describes important terms.

show more