Equipment information
Keithley 2015P Digital multimeter
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Keithley 2015P ?
If you have any other manuals for the
Keithley 2015P you can upload the files here .
Model:
2015P
Date:
2001
Category:
Group:
Description:
THD Multimeter
Information
Feature overview
The Model 2015 is a 6 1⁄2-digit high-performance digital
multimeter. It has 0.002% 90-day
basic DC voltage accuracy and 0.008% 90-day basic resistance
accuracy. At 6 1⁄2-digits, the multimeter delivers 50
triggered readings/sec over the IEEE-488 bus. At 4
1⁄2-digits, it can read up to
2000 readings/sec into its internal buffer. The Model 2015
has broad measurement ranges:
THD, THD+n, and SINAD from 20Hz to 50kHz with 0.0001%
(0.00001 dB) resolution.
Frequency spectrum analysis from 20Hz to 50kHz (Model 2015P
only).
DC voltage from 0.1μV to 1000V.
AC (RMS) voltage from 0.1μV to 750V, 1000V peak.
DC current from 10nA to 3A.
AC (RMS) current from 1μA to 3A.
Two and four-wire resistance from 100μ Ω to 120MΩ.
Frequency from 3Hz to 500kHz.
Thermocouple temperature from -200°C to +1372°C.
Some additional capabilities of the Model 2015 include:
Full range of functions — In addition to those listed above,
the Model 2015 functions include period, dB, dBm,
continuity, diode testing, mX+b, and percent.
Optional scanning — For external scanning, the Model 2015 is
compatible with Keithley's Model 7001 and 7002 switch
matrices and cards.
Programming language and remote interfaces — The Model 2015
has the SCPI programming language and two remote Interface
ports (IEEE-488/GPIB and RS-232C).
Reading and setup storage — Up to 1024 readings and two
setups (user and factory defaults) can be stored and recalled.
Closed-cover calibration — The instrument can be calibrated
either from the front panel or remote Interface.
Manual Type:
User Manual
Pages:
46
Size:
420.71 Kbytes (430803 Bytes)
Language:
english
Revision:
A
Manual-ID:
2015-903-01
Date:
2001 12 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2018 08 22
MD5:
51b7fe31cfdfce71a439bb6c133ee45b
Downloads:
1213
Information
AC Signal Analysis
Using Models 2015, 2015-P, and 2016 THD Multimeters
Quick Reference Guide
About this guide
This guide is designed to familiarize users with basic Model
2015/2015-P/2016 operations to analyze an AC input signal.
Operations include harmonic distortion measurements,
standard AC volts and frequency measurements, and frequency
spectrum analysis (Model 2015-P only).
This guide covers front panel operation and remote operation
over the GPIB or RS-232. The SCPI commands provided are
generic; actual syntax depends on the test programming lan-
guage being used.
Information in this guide is organized as follows:
Measurements overview – Summarizes the measurements used to
analyze an AC input signal.
Measuring harmonic distortion:
Harmonic distortion calculations – Shows how harmonic
distortion is calculated for the three measurement types;
THD, THD + noise, and SINAD.
Distortion measurement operations – Covers the various
operations (front panel and remote commands) used to
configure and measure distortion.
Distortion measurement examples – Includes an example to
measure total harmonic distortion (THD), and an example that
uses a source sweep to measure distortion and RMS volts.
Measuring AC volts and frequency – Provides the basic
procedure to measure AC volts or frequency.
Analyzing frequency spectrum (Model 2015-P only):
Basic peak analysis – Covers the commands used to measure
the peak amplitudes of the frequencies in the spectrum.
Includes a remote command sequence example to find and
measure the frequencies that have the three highest amplitudes.
Delta function – Covers the commands to measure the
difference in frequency and amplitude between two frequency
pointer positions. Includes a command sequence example.
Frequency list analysis – Covers the commands to create a
frequency list and return the amplitudes of the listed
frequencies. Includes a command sequence example.
Manual Type:
User Manual
Pages:
284
Size:
2.86 Mbytes (2999749 Bytes)
Language:
english
Revision:
E
Manual-ID:
2015-900-01
Date:
2001 12 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2018 08 22
MD5:
5e84f2afdbc92fe28aa621c8d57d6dfd
Downloads:
801
Information
When this manual refers to the Model 2015, it is also
referring to the Model 2015P. Information that pertains
exclusively to the Model 2015P will be clearly indicated.