|Datex-Ohmeda 7000 Beatmungsgerät|
|Kategorie:||Medizinische und biomedizinische Geräte|
The Model 7000 Anesthesia Ventilator is an electronically controlled, pneumatically driven device, specifically designed for mechanical ventilation of patients during surgery under general anesthesia. The instrument consists of two major parts: 1. The Bellows Assembly* connects to both the control unit and anesthesia machine by flexible hoses, and isolates the breathing circle system from the driving gas. Provision is made for mounting the bellows assembly on top of the control unit. Note: A Kit, (Stock No. 0219-7518-810) is available to be used with the Modulus II Anesthesia System which permits the GMS Absorber to 7000 Ventilator bellows interface. Installation instructions are provided with the kit. 2. The Control Unit contains all the electrical and pneumatic components necessary to drive the bellows assembly according to the selected parameters, and to perform the monitoring alarm functions. The controls on the Ventilator are calibrated to linear scales, and are non-interactive so that changing one control setting does not affect the other control settings. They are set to the physiological parameters of Minute Volume, Breathing Rate, and Inspiratory/Expiratory ratio. From these settings, the electronic circuitry in the Ventilator calculates the Flow and Tidal Volume to deliver to the patient. Several alarm conditions are monitored by the electronic circuitry: 1. Low Oxygen Supply Pressure 2. Low Airway Pressure 3. High Airway Pressure 4. Ventilator Failure (electronics) 5. Selected Minute Volume not delivered 6. Actual I:E ratio less than dial setting The Ventilator operates from a nominal 50 psig oxygen source, usually delivered from the power outlet of an anesthesia gas machine. The driving gas consumption is approximately the same as the minute volume delivered.
Folgende Handbücher sind hierfür verfügbar:
|Datex-Ohmeda -- 7000 -- Serviceanleitung|
|Dateigröße:||7.66 Mbytes (8036261 Bytes)|
|Datum:||01 Januar 1990|
|Qualität:||Elektronisches Dokument, kein Scan, sehr gut lesbar.|
|Upload Datum:||06 März 2018|
|Downloads:||280 seit dem 06 März 2018|
This service manual covers the variation of the 7000 Electronic Ventilator which has selectable mains voltages. Earlier variations of the 7000 Electronic Ventilator are covered in the 7000 Electronic Ventilator Service Manual Stock Number 0178-0125-000.
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.