Geräte Informationen

Hewlett Packard 6214B Netzteil
Hersteller:
Hewlett Packard
Modell: 6214B
Datum: 1982
Kategorie: Messgeräte
Gruppe: Netzteil
Beschreibung: DC Power Supply Bench Series
Informationen:

DESCRIPTION 1 -2 This Power supply is completely transistorized and suitable for either bench or relay rack operation. It is a compact, well-regulated, Constant Voltage/Constant Current supply that will furnish full rated output voltage at the maximum rated output current or can be continuously adjusted throughout the output range. The front panel CURRENT control can be used to establish the output current limit (overload or short circuit) when the supply is used as a constant Voltage Source and the VOLTAGE controls can be used to establish the voltage limit (ceiling) when the supply is used as a constant Current source. The supply will automatically crossover from constant voltage to constant current operation and vice versa if the output current or voltage exceeds these preset limits. 1-3 Either the positive or negative output terminal may be grounded or the Power supply can be operated floating at up to a maximum of 300 volts off ground. 1-4 A single meter is used to measure either output voltage or output current in volts of mA. The voltage or current range is selected by the METER SELECTION switch on the front panel.

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung HewlettPackard-10076-Manual-Page-1-Picture
Seitenanzahl: 47
Dateigröße: 18.76 Mbytes (19668537 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 5950-1928
Datum: 01 November 1982
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: d4b13aeb269722be12718ac0494e54de
Downloads: 195 seit dem 30 Dezember 2017
Informationen:

HewlettPackard-10076-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics