Geräte Informationen

Emco 1061-04 Test Set
Hersteller:
Emco
Modell: 1061-04
Datum:
Kategorie: Messgeräte
Gruppe: Test Set
Beschreibung: Equipment Testing Turntabl
Informationen:

SYSTEM DESCRIPTION The Emco Equipment Testing Turntable is designed for use in compliance testing. Rotation is provided by a drive system which includes an electric motor, electric brake and a drive gear reduction arrangement. Approximately 370 degrees of rotation are provided before travel is stopped by mechanically actuated limit switches, which are preset at the factory. The base of the turntable is constructed of marine grade plywood, the platform is fabricated of either marine grade plywood covered with formica or solid 3/8" steel plate, depending on the model chosen. Both platforms are designed to provide strength and rigidity and resist degradation due to harsh environments. The drive unit is attached to the base section, as is the phenolic support and the stationary member of the center bearing. In addition to mechanical limits, the controller has the capability to move the table a full 370 degrees of rotation as well as any smaller arc of the circle. For further explanation of controller functions and programming, see the manual section entitled "Controller Operation and Programming".

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung Emco-9924-Manual-Page-1-Picture
Seitenanzahl: 30
Dateigröße: 990.42 Kbytes (1014187 Bytes)
Sprache: Englisch
Revision: 7
Dokument-ID/Nummer: 399011
Datum:
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 43c2fcd0a1ff537b5b3c339c07f6c791
Downloads: 271 seit dem 23 Dezember 2017
Informationen:

Emco-9924-Manual-Page-1-Picture