Geräte Informationen

Compliance West GF-25A Test Set
Hersteller:
Compliance West
Modell: GF-25A
Datum: 1993
Kategorie: Messgeräte
Gruppe: Test Set
Beschreibung: Ground Circuit Tester
Informationen:

The instrument is a bench-type ground circuit tester. The GF-25A features automatic one button operation, with PASS or FAIL test result indicated by lights on the front panel and an internal buzzer. A supervisor-adjustable test duration circuit allows the test to continue for a predetermined amount of time after the Test Button has been released. The instrument advises the operator of any internal malfunction affecting the output. A one-time setup procedure allows the instrument to compensate for lead resistance, allowing the instrument to measure the true resistance of the grounding circuit of the equipment under test. The GF-25A meets TÜV criteria for automatic production line ground circuit testers.

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung Compliancewest-9178-Manual-Page-1-Picture
Seitenanzahl: 18
Dateigröße: 59.04 Kbytes (60458 Bytes)
Sprache: Englisch
Revision: 1.20
Dokument-ID/Nummer:
Datum: 07 Dezember 1993
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: 1c0cc9debe9c94b271c7e0e34852a4c4
Downloads: 98 seit dem 05 August 2017
Informationen:

This manual contains complete operating, maintenance and calibration instructions for the Compliance West USA Model GF-25A Ground Circuit Tester. Table of Contents Introduction and Specifications ... 1 Introduction ... 1 Specifications ... 1 Operation ... 3 Setting up your tester ... 3 AC Line Voltage Requirements ... 3 Fuse Replacement ... 3 Front Panel Features ... 3 Initial Checkout Procedure ... 5 Adjusting the Pass/Fail Point ... 5 Adjusting the Pass/Fail Point using the supplied Test Cordset ... 5 Adjusting the Pass/Fail Point for products with non-removable power cords ... 6 Time Duration Adjustment ... 6 Operating Techniques ... 8 Setting the Test Time Duration ... 8 Testing the EUT ... 8 Test results ... 8 Green Light ... 8 Red Light ... 8 Red Light and Buzzer Sound ... 8 Simultaneous Red and Green Light ... 9 Green Light and Buzzer Sound ... 9 Troubleshooting Guide ... 10 Technical Assistance ... 10 Maintenance ... 11 Introduction ... 11 Service Information ... 11 General Maintenance ... 11 Interior Access ... 11 Calibration Access ... 11 Main PWB Removal ... 12 Front Panel Removal ... 12 Cleaning ... 12 Performance Test ... 12 Operation/Lamp Function Test ... 13 Current Output Test ... 13 Calibration Procedure ... 13 Power Supply Check ... 14 Voltage Range Adjustment ... 14

Compliancewest-9178-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics