Geräte Informationen

Telecommunications Techniques Corporation Interceptor 147 Netzwerk Tester
Hersteller:
Telecommunications Techniques Corporation
Modell: Interceptor 147
Datum: 1992
Kategorie: Messgeräte
Gruppe: Netzwerk Tester
Beschreibung: 2 Mbit/s and Data Analyzer
Informationen:

The Interceptor 147 2 Mbit/s and Data Analyzer is a hand-held, battery-operated digital communications test cij instrument. It can perform in-service and out-of-service analysis on 2048 kbit/s circuits, 64 (or 56) kbit/s timeslots (including individual, adjacent, or non-adjacent timeslots), as well as physical layer testing at data Interface access points. The front panel of the test instrument is arranged so that the test instrument is easy to use. To learn more about the functions of controls and indicators on the front panel, see Section 2, Instrument Description. To set up to test a digital communications circuit, see Section 3, Setup Categories. As you conduct a test, the test instrument provides a number of test results that provide information about the circuit under test. For information about the test results, see Section 4, Test Results. In addition to performing the tests and viewing the results, you can also connect a Printer to the test instrument and print information regarding the test setup and test results. The information can be printed in a number of formats, including histogram format. For information regarding printing, see Section 5, Using a Printer. Additionally, the test instrument can be controlled through a remote controller such as a personal computer. For information regarding remote control, see Section 6, Remote Control. The Interceptor 147 includes the following key features: Interceptor 147 2 Mbit/s and Data Analyzer Operates at 2 Mbit/s, Nx64, Mx64, Nx56, Mx56 kbit/s, and Data Communications rates Measures 2 Mbit/s signal level Performs digital and VF channel analysis Displays 2 Mbit/s timeslot activity Automatically detects 2 Mbit/s framing and pattern Performs bit slip and frame slip analysis and stress testing of network timing (Option 147-1) Detects REBE (Remote End Block Error) bits in 2Mbit/s mode Measures round trip delay Provides a 16K test mode Transmits NTPM, LEPM, and programmable ISDN (Sa6) loop codes Displays and prints Sa6 messages Generates frequencies from 50 bit/s to 2.048 Mbit/s Transmits and displays Transmic 2G (C-Bit) loop codes Performs M.2100 in-service performance analysis Provides remote control commands for remote operation Stores and recalls setup configuration Stores and prints Results with/without Histograms Squelches prints when high error rate produces too many prints

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Bedienungsanleitung TTC-8371-Manual-Page-1-Picture
Seitenanzahl: 280
Dateigröße: 581.44 Kbytes (595396 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 50-13139-01
Datum: 01 April 1995
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 064326a6385e19fbf37174fb7f3f1f1a
Downloads: 87 seit dem 09 Januar 2017
Informationen:

GETTING STARTED ... 1-1 ^ 1.1 INTRODUCING THE ° INTERCEPTOR 147 ... 1-1 o 1.2 OPTIONS FOR THE INTERCEPT (2 OR 147 ... 1-3 1.3 WARNINGS ... 1-4 1.4 UNPACKING INSTRUCTIONS ... 1-4 1.5 STANDARD EQUIPMENT AND ACCESSORIES ... 1-5 1.6 POWERING THE Interceptor 147.. 1-5 1.7 INITIAL CHECK-OUT PROCEDURE ... 1-6 1.8 BASIC SETUP PROCEDURE ... 1-8 INSTRUMENT DESCRIPTION ... 2-1 2.1 OVERVIEW ... 2-1 2.2 TRANSMITTER ... 2-4 2.3 STATUS DATA Interface ... 2-5 2.4 EXTERNAL CLOCK ... 2-7 2.5 DATA Interface SIGNALING LEDS ... 2-7 2.6 DATA Interface CONNECTORS ... 2-8 2.7 STATUS & ALARMS ... 2-10 2.8 RECEIVER ... 2-13 2.9 MISCELLANEOUS CONTROLS AND LEDS ... 2-16 2.10 DISPLAY, SCROLL, CURSOR, SELECT ... 2-18 2.11 SETUP ... 2-19 2.12 RESULTS ... 2-19 2.13 VOLUME CONTROLS AND SPEAKER ... 2-20 2.14 Printer CONTROLS ... 2-21 2.15 POWER ... 2-21 2.16 TOP PANEL OF THE TEST INSTRUMENT ... 2-16 SETUP CATEGORIES 3-1 £ 3.1 OVERVIEW ... 3-1 TEST MODE CATEGORY ... 3-2 CONFIGURATION CATEGORY ... 3-8 TIMESLOTS CATEGORY ... 3-28 ALARM/SIGNAL CATEGORY ... 3-34 AUXILIARY CATEGORY ... 3-38 TEST RESULTS ... 4-1 Interceptor 147 2 Mbit/s and Data Analyzer 4.1 OVERVIEW ... ... 4-1 4.2 SUMMARY RESULTS ... ... 4-1 4.3 LOGIC & TIME RESULTS ... ... 4-2 4.4 SIGNAL, CODE & FAS RESULTS ... ... 4-5 4.5 CHAN. & SIGNALING RESULTS ... 4-10 4.6 PERFORMANCE RESULTS ... 4-12 USING A Printer ... 5-1 5.1 OVERVIEW ... ... 5-1 5.2 CONTROLS PRINT ... ... 5-2 5.3 RESULTS PRINT ... ... 5-2 5.4 AUTO PRINT — TIMED ... ... 5-4 5.5 AUTO PRINT — EVENT ... 5-5 5.6 HISTOGRAM PRINT ... ... 5-6 5.7 Printer SETUP ... 5-10 REMOTE CONTROL ... ... 6-1 6.1 OVERVIEW ... ... 6-1 6.2 REMOTE CONTROL OPERATION .. ... 6-2 6.3 COMMANDS AND QUERIES ... 6-3 6.4 ERROR MESSAGES ... 6-44 APPLICATIONS ... ... 7-1 7.1 OVERVIEW ... ... 7-1 7.2 IN-SERVICE MONITORING A 2048 KBIT/S CIRCUIT ... ... 7-1 7.3 OUT-OF-SERVICE TESTING A 2048 KBIT/S CIRCUIT ... 7.4 ANALOG/DIGITAL TESTING OF A ts VOICE CHANNEL ... 7-6 ent 7.5 TROUBLESHOOTING AN NX56 OR nte NX64 KBIT/S CIRCUIT ... 7-8 Co 7.6 COMMISSIONING A CUSTOMER'S ^ NX64K SERVICE ... 7-12 ° 7.7 MONITORING 2048 KBIT/S CIRCUITS ble FROM DS3 ACCESS POINTS ... 7-14 (2 7.8 PERFORMING A BIT SLIP/ FRAME SLIP TEST ... 7-17 7.9 TESTING AT A DATA Interface ... 7-19 7.10 TESTING MULTIPLEXED (DATA TO 2048 KBIT/S) CIRCUITS ... 7-24 7.12 NOTES REGARDING ROUND-TRIP DELAY ... 7-24 SPECIFICATIONS ... 8-1 8.1 2 MBIT/S OPERATING MODES ... 8-1 8.2 V.11 DATA Interface ... 8-5 8.3 V.35 DATA Interface ... 8-5 8.4 X.21 DATA Interface ... 8-6 8.5 V.24 DATA Interface ... 8-6 8.6 CODIRECTIONAL 64 KBIT/S G.703 INTERFACE ... 8-7 8.7 Printer / REMOTE CONTROL INTERFACE ... 8-7 8.8 GENERAL ... 8-8 MAINTENANCE AND SERVICE ... 9-1 9.1 OVERVIEW ... 9-1 9.2 TROUBLESHOOTING ... 9-1 9.3 SERVICE ... 9-2 9.4 HOW TO CONTACT TTC ... 9-6

TTC-8371-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics