Geräte Informationen

Fluke 2205A Control Unit
Hersteller:
Fluke
Modell: 2205A
Datum: 1982
Kategorie: Messgeräte
Gruppe: Control Unit
Beschreibung: Switch Controller
Informationen:

1-1. INTRODUCTION 1-2, The Fluke Model 2205A Switch Controller is an instrument mainframe which accepts Plug-In options for multi-function switching of analog signals. The 2205A is designed for automatic test equipment (ATE) and data acquisition system use. The switch modules functionally accomodate the three fundamental requirements for switching in instrumentation systems: signal aquisition, distribution, and control. 1-3. The key feature of the 2205A is its modular configuration which supports concurrent multi-function switching. Other important features include: low thermal design for low level measurment applications, Dual guarded internal scanner bus for precision resistance measurements or parallel scanning, and expansion capability. In its basic form, the 2205A is capable of physically housing up to 10 switch modules and can be expanded to electrically control up to 100 switch modules. The 2205A is also compatible with companion instruments for system application. 1-4. The front panel of the 2205 A features the controls and indicators necessary for manual (local) control of the switch modules. Commands are entered on a calculator- type keyboard (0-9) and are displayed on a three-digit LED display. Three control buttons (BLOCK RESET/T.C. REF. JUNCTION, LOCAL, and INCREMENT) are provided for commanding thermocouple reference junction measurements or module resets (depending on type of module addressed), local recall (remote-to-local), and channel increment. 1-5. The rear panel of the 2205A includes a remote Interface connector (for use on IEEE-488 or RS-232-C Standard buses), an extender connector to add extention mainframes, an analog connector for connecting the internal scanner buses to an external instrument such as a Digital multimeter (DMM), and a trigger output connector for initiating a DMM reading. An analog output cable for connection between the 2205A and a system type DMM is supplied with the 2205A. The remote Interface cable, the trigger output cable (coax with BNC connectors), and an extender cable (which is required when adding a extension chassis) are options and are not included with the unit. Extender cables are available as Accessories and are fabricated by the factory to meet particular cable length requirements. Cable lengths from 3 to 1500 feet may be used depending upon the extention mainframe employed. 1 -6. The slots for the switch modules are also located at the rear of the 2205A. They consist of a series of 10 pcb slots (blocks) numbered from 0 through 9. Each slot will accommodate a Plug-In relay pcb and an input connector for supplying analog data to the 2205A. The relay pcbs and the input connectors make-up a module are available as options. 1-7. All options and Accessories available for use with the 2205A are listed in Table 1-1. Details necessary for specification, installation, operation, and maintenance are given in Section 7 of this manual.

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung Fluke-7699-Manual-Page-1-Picture
Seitenanzahl: 154
Dateigröße: 7.29 Mbytes (7645100 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 633644
Datum: Januar 1982
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: b2f8e2b774c01f0937c6efc3aae0f439
Downloads: 190 seit dem 08 Februar 2016
Informationen:

1 INTRODUCTION AND SPECIFICATIONS ... 1-1 1-1. INTRODUCTION ... Ϊ-Ι 1-8. SPECIFICATIONS ... 1-1 2 INSTALLATION ... 2-1 2-!. INTRODUCTION ... 2-1 2-3. SHIPPING INFORMATION ... 2-1 2-6. INPUT POWER ... 2-i 2-9. FUSE REPLACEMENT ... 2-1 2-11. INSTALLATION NOTES ... 2-2 2-12. Introduction ... 2-2 2-34. Switch Modules ... 2-2 2-17. Analog Signal Cable ... 2-2 2-19. Internal Scanner Buses ... 2-2 2-23. INTERNAL SWITCHES ... 2-3 2-24. _ Access Procedure ... 2-3 2-26. Two-/Four-wire Bus Selection ... 2-3 2-28. Auto Increment Rate Selection ... 2-4 2-30. Trigger Output ... 2-4 2-33. Baud Rate Selection ... 2-5 2-35. IEEE Address Selection ... 2-6 2-37. RACK INSTALLATION ... 2-6 2-39. SCANNER EXTENT!ON ... 2-6 3 OPERATING INSTRUCTIONS ... 3-1 3-1. INTRODUCTIONS ... ... 3-1 3-3. OPERATING FEATURES ... ... 3-1 3-5. OPERATING NOTES ... ... 3-1 3-6. Introduction ... ... 3-1 3-8. Internal Scanner Buses ... ... 3-1 3-12. Local Operation ... ... 3-1 3-14. Auto Increment Operation ... ... 3-4 3-17. Remote Operation ... ... 3-4 3-69. Operating Conditions ... ... 3-8 3-71. OPERATION ... ... 3-8 4 THEORY OF OPERATION ... 4-1 4-1. INTRODUCTION ... 4-1 4-3. OVERALL FUNCTIONAL DESCRIPTION ... 4-1 4-6. BLOCK DIAGRAM ANALYSIS ... 4-2 4-7. Front. Panel Display PCB ... 4-2 4-11. Extended Bus PCB ... 4-3 4-16. Power supply ... 4-4 4-21. Remote Interface Options ... 4-4 5 MAINTENANCE ... 5-1 5-1. INTRODUCTION ... 5-1 5-3. SERVICE INFORMATION ... 5-1 5-6. GENERAL MAINTENANCE ... 5-1 5-7. Cleaning ... 5-1 5-9. PERFORMANCE TEST ... 5-2 5-11. Set-up Procedure ... 5-2 5-13. Manual Test Procedure ... 5-2 5-15, Baud Rate/IEEE Address ... . 5-3 5-17, Remote Interface Test Procedure ... 5-3 5-19. CALIBRATION ADJUSTMENT ... 5-3 5-21. TROUBLESHOOTING ... 5-3 6 LIST OF REPLACEABLE PARTS ... 6-1 6-1. INTRODUCTION ... 6-2 6-4. HOW TO OBTAIN PARTS ... 6-2 7 OPTIONS AND Accessories ... 7-1 TABLE OF CONTENTS ... 7-1 8 MANUAL CHANGE INFORMATION ... 8-1 9 SCHEMATIC DIAGRAMS ... 9-1 TABLE OF CONTENTS ... 9- f

Fluke-7699-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics