Geräte Informationen

Sorensen Company DCS8-140E Netzteil
Hersteller:
Sorensen Company
Modell: DCS8-140E
Datum: 2003
Kategorie: Messgeräte
Gruppe: Netzteil
Beschreibung: DC Power Supply
Informationen:

DCS Series power supplies are 1000W and 1200W supplies designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The DCS Series employs high frequency switching regulator technology to achieve high power density and small package size. The series consists of twelve 1000W models and twelve 1200W models. The model numbers are designated by the DCS prefix, followed by the output voltage and current ratings. For example, the model number DCS 60-18E indicates that the unit is rated at 0-60 Vdc and 0-18 Amps while a model DCS 20-50E is rated at 0-20 Vdc and 0-50 Amps. • Twelve 1kW models with voltage ranges from 0-8 Vdc to 0-600 Vdc and current outputs from 1.7A to 125A. • Twelve 1.2kW models with voltage ranges from 0-8 Vdc to 0-600 Vdc and current outputs from 2A to 140A. • 115/230 Vac selectable input voltage, 50-60 Hz single phase, Installation Category II. For Indoor Use. • Simultaneous digital display of both voltage and current. • Automatic mode crossover into current or voltage mode. • Ten turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the rated output. • Flexible output configuration: multiple units can be connected in parallel or series to provide increased current or voltage. • High frequency switching technology allows high power density, providing increased power output in a small, light package. • Remote sensing to compensate for losses in power leads. • Adjustable Over-Voltage Protection (OVP) • External TTL, AC or DC shutdown • Remote voltage, resistive, current limit and OVP programming with selectable programming constants. • External indicator signals for remote monitoring of OVP status, local/remote programming status, thermal shutdown, and output voltage and current. • Optional IEEE-488 Interface for complete remote programming and readback capability.

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Bedienungsanleitung Sorensen-7391-Manual-Page-1-Picture
Seitenanzahl: 60
Dateigröße: 1.01 Mbytes (1063874 Bytes)
Sprache: Englisch
Revision: B
Dokument-ID/Nummer: M362500-0
Datum: 21 Juli 2003
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: b46bf02c88ac42ee9fec20089eb66a51
Downloads: 1257 seit dem 29 November 2015
Informationen:

SECTION 1 FEATURES AND SPECIFICATIONS ... 1-1 1.1 Description ... 1-1 1.2 Operating Modes ... 1-1 1.3 Power supply Features ... 1-1 1.4 Specifications ... 1-3 1.4.1 Electrical Specifications for 1kW Models ... 1-3 1.4.2 Electrical Specifications for 1.2kW Models ... 1-4 1.4.3 Physical Specifications ... 1-5 1.4.4 Mechanical Specifications ... 1-6 SECTION 2 INSTALLATION AND OPERATION ... 2-1 2.1 General ... 2-1 2.2 Initial Inspection ... 2-1 2.3 Installation ... 2-1 2.3.1 Input Voltage Selection ... 2-1 2.3.2 Input Line Impedance ... 2-2 2.3.3 Ventilation Requirements ... 2-2 2.3.4 Output Voltage Biasing ... 2-2 2.3.5 Rack Mounting ... 2-2 2.4 Controls, Connectors, and Indicators ... 2-4 2.4.1 Front Panel ... 2-4 2.4.2 Rear Panel ... 2-4 2.4.3 J3 Program, Sense and Monitor Connector Description ... 2-5 2.5 Initial Functional Tests ... 2-6 2.6 Standard Operation ... 2-7 2.6.1 Load Conductor Ratings ... 2-7 2.6.2 Load Connection and Grounding ... 2-7 2.6.3 Inductive Loads ... 2-8 2.6.4 Remote Sensing ... 2-8 2.6.5 Negative Output Operation ... 2-9 2.7 Single Supply Operation (Local Mode) ... 2-9 2.8 Multiple Supplies ... 2-10 2.8.1 Series Operation ... 2-10 2.8.2 Parallel Operation ... 2-10 2.8.3 Split Supply Operation ... 2-11 2.9 Over Voltage Protection (OVP) ... 2-11 2.9.1 Front Panel OVP Operation ... 2-11 2.9.2 Remote Programming of OVP With External Voltage Sources ... 2-12 2.9.3 Remote Programming of OVP with an External Resistance ... 2-13 2.9.4 Remote Programming of OVP with External Current Sources ... 2-14 2.9.5 Remote OVP Sensing ... 2-15 2.10 Remote ON/OFF ... 2-15 2.10.1 Remote ON/OFF by Contact Closure ... 2-16 2.11 Remote Programming of Output Voltage and Current Limit ... 2-16 2.11.1 Programming With External Voltage Sources ... 2-17 2.11.2 Programming With an External Resistance ... 2-18 2.11.3 Programming With an External Current Source ... 2-19 2.12 Remote Monitoring and Status Indicators ... 2-21 SECTION 3 THEORY OF OPERATION 3.1 Power Circuit (A2 Assembly) ... 3-1 3.1.1 Basic Off-Line Switching Regulator Theory ... 3-1 3.1.2 Simplified Full Bridge Converter Theory ... 3-3 3.1.3 Detailed Circuit Description ... 3-3 3.2 Meter Circuit (A1 Assembly) ... 3-9 3.2.1 Voltmeter ... 3-10 3.2.2 Current Meter ... 3-10 SECTION 4 MAINTENANCE, TROUBLESHOOTING, AND CALIBRATION 4.1 General ... 4-1 4.2 Periodic Service ... 4-1 4.3 Troubleshooting ... 4-1 4.3.1 Preliminary Checks ... 4-2 4.3.2 Troubleshooting at the Operation Level ... 4-2 4.4 Calibration ... 4-3 SECTION 5 PARTS LISTS 5.1 General ... 5-1 5.2 Parts Ordering ... 5-1 5.3 Parts Lists ... 5-2 SECTION 6 DRAWINGS AND SCHEMATICS NOT INCLUDED!

Sorensen-7391-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics