Информация по оборудованию

Fisher & Paykel Healthcare MR850 аппара́т для иску́сственного дыха́ния
Производитель:
Fisher & Paykel Healthcare
Модель: MR850
Дата: 2005
Категория: Медицинское и биомедицинское оборудование
Группа: аппара́т для иску́сственного дыха́ния
Описание: Respiratory Humidifier
Информация:
                                    The MR850 humidifier is designed to add heat and moisture to
respiratory gases. The gas is passed through a
humidification chamber where it is warmed and humidified.
The MR850 has two heating systems. The first is a heater
plate, which heats the water contained in the humidification
chamber, humidifying the air passing through it. The
humidifier monitors the temperature of the gas at the
chamber outlet with the chamber probe, and controls
the amount of power delivered to the heater plate, in order
to maintain the chamber set point.
Under normal conditions the gas is heated to 37 °C in the
invasive mode, 31 °C for the noninvasive mode.

Эти руководства доступны для вышеуказанного оборудования:

Ручной тип: Обслуживание и Руководство пользователя FisherPaykelHC-10548-Manual-Page-1-Picture
Страниц: 62
Размер: 3.91 Mbytes (4095203 Bytes)
Язык: английский
Редакция: J
Руководство ID/номер: 185041340
Дата: 01 Январь 2005
Качество: Электронный документ, ни сканирование, очень хорошо читается.
Дата загрузки:
MD5: 0fd1eca6362d93f88745a6d94df06ba5
Загрузки: 17 начиная с 06 Март 2018
Информация:
INTRODUCTION
.................................................................................................................................7
ABOUT THIS MANUAL
..............................................................................................................................7
GLOSSARY
............................................................................................................................................7
DEFINITIONS
..........................................................................................................................................8
PRODUCT APPLICATION
..........................................................................................................................8
HUMIDIFIER
SYMBOLS.....................................................................................................................9
SPECIFICATIONS.............................................................................................................................10
MECHANICAL
.......................................................................................................................................10
ELECTRICAL
.........................................................................................................................................10
TEMPERATURE RANGE
.........................................................................................................................10
3.3.1 Heater Wire
Mode..................................................................................................................10
3.3.2 Non Heater Wire
Mode..........................................................................................................10
3.3.3 Alarm
Parameters..................................................................................................................10
PERFORMANCE
....................................................................................................................................11
TRANSPORT AND STORAGE ENVIRONMENTAL CONDITIONS
....................................................................11
STANDARDS AND
APPROVALS...............................................................................................................11
4
4.1
4.2
4.3
4.4
4.5
5
5.1
5.2
5.3
OPERATING MODES AND
CONTROLS.........................................................................................12
HUMIDIFIER OPERATION
.......................................................................................................................12
4.1.1 Heater wire operation
............................................................................................................12
4.1.2 Non-Heater Wire
Operation...................................................................................................13
4.1.3 Stand-by
Operation................................................................................................................13
4.1.4 Power Up
Sequence..............................................................................................................14
4.1.5 Humidity Compensation (HC)
mode......................................................................................14
4.1.6 Breathing Circuit Recognition
................................................................................................15
HUMIDIFIER CONTROLS
........................................................................................................................16
4.2.1 Power Button
.........................................................................................................................16
4.2.2 Mode Button
..........................................................................................................................16
4.2.3 Mute Button
...........................................................................................................................17
TEMPERATURE DISPLAY
.......................................................................................................................17
4.3.1 Showing Chamber and Airway Temperature
........................................................................17
SETUP INDICATORS
..............................................................................................................................17
4.4.1 Heater wire connector
...........................................................................................................17
4.4.2 Temperature / Flow Probe Connector
...................................................................................18
4.4.3 Chamber Probe & Airway Probe
...........................................................................................18
4.4.4 Chamber or Airway Probe Alarm with Probe connector
alarm..............................................18
4.4.5 Water Out
Indicator................................................................................................................19
OPERATIONAL
ALARMS.........................................................................................................................19
4.5.1 Temperature Indicator
...........................................................................................................19
4.5.2 Non-Heater Wire
Operation...................................................................................................20
4.5.3 See Manual
Indicator.............................................................................................................20
MAINTENANCE
PROCEDURES......................................................................................................21
MAINTENANCE SCHEDULE
....................................................................................................................21
5.1.1 MR850 Humidifier
..................................................................................................................21
5.1.2 MR850 Temperature
Probe...................................................................................................21
SAFETY CHECK
....................................................................................................................................22
CLEANING INSTRUCTIONS
.....................................................................................................................23
5.3.1 MR850 Humidifiers
................................................................................................................23
5.3.2 Temperature Flow
Probe.......................................................................................................23
TROUBLESHOOTING
.....................................................................................................................
24
OPERATIONAL PROBLEMS
....................................................................................................................
24
TECHNICAL PROBLEMS
........................................................................................................................
26
“SEE MANUAL” ERROR CODES
.............................................................................................................
27
DIAGNOSTIC MENU
..............................................................................................................................
29
6.4.1 Diagnostic Menu for Software Versions 5.45,
5.70...............................................................
29
6.4.2 Diagnostic Menu for Software Version 6.00
.........................................................................
30
6.4.3 Diagnostic Menu for Software Version 7.00 & 7.21
..............................................................
31
6.4.4 Diagnostic Menu for Software Version 7.14 & 7.22
..............................................................
32
6.4.5 Diagnostic Menu for Software Version 7.23
.........................................................................
34
SERVICING
PROCEDURES............................................................................................................
35
GENERAL CONSIDERATIONS
................................................................................................................
35
DISASSEMBLY
.....................................................................................................................................
35
7.2.1 Opening the case
..................................................................................................................
35
7.2.2 Replacing Fuses
...................................................................................................................
36
7.2.3 Replacement of Printed Circuit Boards (PCBs)
....................................................................
37
7.2.4 Replacement of Transformer
................................................................................................
38
7.2.5 Servicing the Heater Plate
....................................................................................................
38
7.2.6 Installing New
Software.........................................................................................................
42
7.2.7 Replacing the Mains Cable
...................................................................................................
43
7.2.8 Closing the
case....................................................................................................................
43
PERFORMANCE TESTING
.............................................................................................................
44
HUMIDIFIER PERFORMANCE TESTING
...................................................................................................
44
8.1.1 Entering the Service
Menu....................................................................................................
44
8.1.2 Humidifier Calibration Check
................................................................................................
44
8.1.3 Humidifier Display Test
.........................................................................................................
45
8.1.4 Humidifier Voltage Calibration Check
...................................................................................
46
8.1.5 Humidifier Warm-up and Control Check
...............................................................................
46
PROBE ACCURACY CHECK
...................................................................................................................
47
8.2.1 Probe Temperature Accuracy Test
.......................................................................................
47
8.2.2 Probe Flow Accuracy Test
....................................................................................................
47
RECOMMENDED MAINTENANCE
CHECKLIST............................................................................
49
HUMIDIFIER CHECK (ANNUALLY)
..........................................................................................................
49
PROBE CHECK (EVERY SIX
MONTHS)....................................................................................................
49
SPARE
PARTS.................................................................................................................................
51
CALIBRATION PROBE
...................................................................................................................
55
SERIAL PORT & LOGGING SOFTWARE
......................................................................................
56
INTRODUCTION...............................................................................................................................
56
INSTALLATION.................................................................................................................................
56
OPERATING INSTRUCTIONS
.........................................................................................................
56
12.3.1 Viewing Humidifier
Data........................................................................................................
56
12.3.2 Logging Humidifier Data to
File.............................................................................................
57
EMC
INFORMATION........................................................................................................................
58
PRODUCT CHANGE
HISTORY.......................................................................................................
60
FisherPaykelHC-10548-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics