Информация по оборудованию

Kern & Sohn GmbH FKB Масштаб
Производитель:
Kern & Sohn GmbH
Модель: FKB
Дата: 2006
Категория: Медицинское и биомедицинское оборудование
Группа: Масштаб
Описание: Precision Balance
Информация:
                                    

Эти руководства доступны для вышеуказанного оборудования:

Ручной тип: Руководство по техническому обслуживанию Kern-10439-Manual-Page-1-Picture
Страниц: 22
Размер: 1.22 Mbytes (1277284 Bytes)
Язык: английский
Редакция: 5.1
Руководство ID/номер: 572/573/KB/DS/FKB-BA-defsi-0651
Дата: 01 Май 2006
Качество: Электронный документ, ни сканирование, очень хорошо читается.
Дата загрузки:
MD5: 4c40ccd3a88248d5c04e254c4c0976ed
Загрузки: 83 начиная с 24 Февраль 2018
Информация:
1
 MODE - MENUE
__________________________________________________________ 26
2
 Technical data
_____________________________________________________________ 27
2.1
 KERN 572
__________________________________________________________________
27
2.2
 KERN 573
__________________________________________________________________
28
2.3
 KERN KB
__________________________________________________________________
29
2.4
 KERN FKB
_________________________________________________________________
29
2.5
 KERN DS
___________________________________________________________________
30
3
 Fundamental information (general)
___________________________________________ 31
3.1
 Intended
use_________________________________________________________________
31
3.2
 Inappropriate use
____________________________________________________________ 31
3.3
 Guarantee
__________________________________________________________________
31
3.4
 Monitoring the test
substances__________________________________________________ 31
4
 Fundamental safety information
______________________________________________ 32
4.1
 Observe the information in the operating instructions
______________________________ 32
4.2
 Staff training
________________________________________________________________
32
5
 Transport and storage
_______________________________________________________ 32
5.1
 Acceptance check
____________________________________________________________ 32
5.2
 Packaging___________________________________________________________________ 32
6
 Unpacking, installation and commissioning
_____________________________________ 32
6.1
 Place of installation, place of use
________________________________________________ 32
6.2
 Unpacking
__________________________________________________________________
33
6.2.1
 Installation
_______________________________________________________________________
33
6.3
 Mains supply
________________________________________________________________
33
6.4
 Connecting peripheral equipment
_______________________________________________ 33
6.5
 Initial start-up
_______________________________________________________________
33
6.6
 Adjustment
_________________________________________________________________
33
6.7
 Adjusting
___________________________________________________________________
33
6.7.1
 Adjusting for verification (KERN 573)
_________________________________________________ 34
6.8
 Verification
_________________________________________________________________
34
7
 Operation
_________________________________________________________________
35
7.1
 Display control panel
_________________________________________________________ 35
7.2
 Operation
___________________________________________________________________
36
7.2.1
 Weighing with Tare
________________________________________________________________
 36
7.2.2
 Count – Selection Preference Piece
____________________________________________________
 36
7.2.3
 Percent %
________________________________________________________________________
 36
7.2.4
 Formula Weighing
_________________________________________________________________
 36
7.2.5
 Tolerance Weighing
________________________________________________________________
 36
7.2.6
 Adjust
___________________________________________________________________________
 38
7.2.7
 Preselect Tare
_____________________________________________________________________
 38
7.2.8
 Auto Tare
________________________________________________________________________
 38
7.2.9
 Speed
___________________________________________________________________________
 38
7.2.10
 Auto Off
_______________________________________________________________________
 38
7.2.11
 Variable
Factor__________________________________________________________________
 38
7.2.12
 Preselect Unit
___________________________________________________________________
 38
7.3
 Interface RS 232 C
___________________________________________________________ 40
7.4
 RS 232 C Data output via interface RS 232 C
_____________________________________ 40
7.4.1
 There are 4 methods for the data output via RS 232
C______________________________________ 40
7.4.2
 Description of the data
transfer________________________________________________________
41
7.4.3
 Numerator
________________________________________________________________________
41
7.5
 Printer
_____________________________________________________________________
41
7.6
 Underfloor weighing
__________________________________________________________ 41
8
 Maintenance, upkeep,
disposal________________________________________________ 42
8.1
 Cleaning
____________________________________________________________________
42
8.2
 Maintenance, upkeep
_________________________________________________________ 42
8.3
 Disposal
____________________________________________________________________
42
9
 Troubleshooting
___________________________________________________________ 42
10
 Declaration of
conformity__________________________________________________ 43
Kern-10439-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics