Equipment information
Fluke Y5020 Power supply
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Fluke Y5020 ?
If you have any other manuals for the
Fluke Y5020 you can upload the files here .
Model:
Y5020
Date:
1979
Category:
Group:
Description:
Current Shunt
Information
INTRODUCTION
The Model Y5020 is a precision, four-terminal, current
shunt designed for use in calibrating ac/dc current sources
in the range of 0 to 20 amps, do to 5 kHz. The shunt is
housed in a forced-air cooled, PTI (Portable Test
Instrument) case. This case is compatible with all
instruments in the Fluke PTI product line and can be
stacked with other PTI products to form a portable test
system.
Forced-air cooling is accomplished by a fan mounted on
the rear panel. Air is pulled in through the fan, passed over
the shunt, and exhausted through the rear panel. Power for
the fan is derived from the power line. Two voltage
configurations are available, 115 or 230V ac ±10%, 50 to
60 Hz.
Four front panel terminals provide electrical access to the
shunt; two are current input terminals and two are voltage
output (sense) terminals. When the shunt is connected into
a circuit and operating at its maximum current limit (20
amps), the input connections and the shunt present a
burden voltage of less than 0.25V dc.
Manual Type:
Service and User Manual
Pages:
12
Size:
11.37 Mbytes (11923325 Bytes)
Language:
english
Revision:
Manual-ID:
516591
Date:
1979 09 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2018 01 20
MD5:
5bd95d7958b9946a91d3e888feb4ca1e
Downloads:
867
Information
Instruction Manual