Оборудование информация

Fluke 343A Калибратор
Производитель:
Fluke
Модель: 343A
Дата: 1969
Категория: Измерительная техника
Группа: Калибратор
Описание: DC Voltage Calibrators
Информация:
                                    1-2. The Fluke Model 341Ä and Model 343A' DC Voltage
Calibrators provide dc voltages of 0 to 1100 volts in three
ranges. Voltages are selected by eleven-position decade
switches, which provide in-line, digital readout of the
instrument output voltage. The Model 341A employs six-dial
readout» with 1 ppm resolution, and the Model 343A employs
seven-dial readout, with 0.1 ppm resolution.
1-3. A controlled current limiter, a fixed current limiter,
and an electronic crowbar circuit provide protection against
instrument malfunction and operator error. Output current or
voltage, depending on function desired, are continuously
monitored by a front panel meter.
1-4. The instruments are designed for rack-mount
installation, using the mounting brackets supplied, and are
equipped with resilient feet and tilt-down bail for field or
bench use.

Эти руководства доступны для вышеуказанного оборудования:

Fluke -- 343A -- Обслуживание и Руководство пользователя
Имя файла: Fluke-7709-Manual-Page-1-Picture
Ручной тип: Обслуживание и Руководство пользователя
Страниц: 98
Размер: 8.48 Mbytes (8891485 Bytes)
Язык: английский
Редакция:
Руководство ID/номер: 293951
Дата: Июнь 1969
Качество: Отсканированы документу, все читается.
Дата загрузки:
MD5: 4dccc19ab7885f56439b8480d49f98d3
Загрузки: 173 начиная с 10 Февраль 2016
Информация:
I INTRODUCTION AND
SPECIFICATIONS................................................................
1-1
1-1. introduction
..............................................................................................
1-1
1-5. Electrical
Specifications..........................................................................
1-1
1-6. Environmental
Specifications...................................................................
1-2
1-7. Mechanical Specifications
..........................................................................
1-3
1-8. General
Specifications...............................................................................
1-3
II OPERATING
INSTRUCTIONS....................................................................................
2-1
2-1. Introduction
.............................................................................................
2-1
2-4. Operating Features. .
..................................................................................
2-1
2-6. Controls, Terminals and Indicators
........................................ 2-1
2-8. Input Power Requirements
..................................................... 2-1
2-10. Preliminary Operation
...............................................................................
2-1
2-12, AC Line
Connections.................................................................
2-1
2-14. Sense
Connections.......................................................................
2-1
2-18. Current Limit
Operation.............................................................
2-5
2-20. Overload
Protection.....................................................................
2-5
2-23. Mechanical Zero
Adjustment.....................................................
2-5
2-25.. Operation as a Voltage
Calibrator.............................................................
2-5
2-27. Applications
..............................................................................................
2-6
2-29. Operation as a Differential
Voltmeter...................................... 2-6
2-31. Operation as a 10 ppm
Source................................................... 2-6
III THEORY OF
OPERATION..........................................................................................
3-1
3-1.
Introduction................................................................................................
3-1
3-3. Block Diagram
Analysis...........................................................................
3-1
3-12. Circuit
Analysis..........................................................................................
3-3
3-13. +15 Volt Reference and Auxiliary
Supplies............................ 3-3
3-16. Chopper-Stabilized
Amplifier.....................................................
3-3
3-20. Series
Regulator............................................................................
3-3
3-23. Controlled Current
Limiter........................................................
3-4
3-27. Negative Voltage
Limiter.............................................................
3-4
3-29. Sink Supply and
Crowbar..........................................................
3-4
3-34. Control
Circuit...........................................................................
3-5
3-38. High Voltage Power
Supply....................................................... 3-6
3-40. Meter
Circuit...............................................................................
3-6
3-42. Beta
String....................................................................................
3-6
IV MAINTENANCE
.......................................................................................................................4-1
4-i. Introduction ............
.......................................................................4-i
4-3. Service information
..............................................................................................4-1
4-6. Test Equipment.
..................................................................................................4-1
4-8. General Maintenance
.........................................................................................4-1
4-9, Maintenance
Access.................................................................
. 4-1
4-13. Adjustment Locations
..........................................................................4-3
4-15.
Cleaning...................................................................................................4-4
4“!S. 1 15/230 Volt
Conversion.....................................................................4-5
4-20. Fuse Replacement .......................
.......................................................4-5
4-22. Lamp Replacement.
.................................................................
. 4-5
4-24. Performance
Tests..................................................................................-
4-6
4-26. Line Regulation.
...................................................................................4-6
4-28. Load
Regulation...................................................................................4-6
4-30, Ripple
....................................................................................................4-7
4-32. Output Voltage
Accuracy....................................................................4-8
4-36. Troubleshooting
...................................................................................................4-8
4-39. Test Point Resistance
Check................................................................4-8
4-41. Standby
Test.........................................................................................4-8
4-43. Auxiliary Supply
Voltages..................................................................4-9
4-45. Power-On
Test.....................................................................................440
4-47. Chopper Amplifier
................................................................................4-11
4-49. Series Regulator
...................................................................................4-11
4-51. Controlled Current Limiter
..................................................................4-12
4-53.
Crowbar..................................................................................................4-12
4-55. High Voltage Power Supply. ...................... 4-12
4-57. Beta String
...............................................................................
. 4-13
4-59. Pane! Meter
...........................................................................................4-13
4-61. Model 341A Calibration
.....................................................................................4-14
4-63. Preliminary Operations.......................... 4-14
4-64. Reference Voltage Adjustment.
..........................................................4-14
4-65. Zero Output Adjustments
.....................................................................4-14
4-66. Beta String Linearity Adjustments .................. 4-14
4-67. Range Adjustments .
............................................................................4-14
4-68. Calibration Verification
.......................................................................4-15
4-70. Model 343A Preliminary
Calibration.................................................................4-15
4-72. Preliminary Operations
.......................................................................'4-15
4-73. Reference Voltage Adjustment
................................................. : 4-16
4-74. Zero Output
Adjustments.....................................................................4-16
4-75. Beta String Linearity
Adjustments.....................................................4-16
4-76, Temperature
Stabilization..................................................................4-17
4-77. Model 343A Final Calibration
.........................................................................4-17
4-79. Zero Output
Adjustments....................................................................4-17
4-80. Beta String Linearity
Adjustments.....................................................4-17
4-83. Range
Adjustments...............................................................................4-19
4-84, Calibration Verifications
...................................................................4-20
V LIST OF REPLACEABLE PARTS
......................................................................................5-1
5-1. Introduction
...........................................................................................
. 5-1
5-3. Column
Description..............................................................................................5-1.
5-5. How To Obtain Parts
............................................................................................5-2
5-8. List of Abbreviations
.........................................................................................5-2
5-9. Serial Number Effectivity
...................................................................................5-45
7 GENERAL
INFORMATION.................................................................................
· ?-l
8 SCHEMATIC
DIAGRAMS...................................................................................................8-1
Fluke-7709-Manual-Page-1-Picture
Начать скачать бесплатно




Отзывы

Отзывов пока нет.

Написать отзыв

* Обязательные поля
(не для публикации)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the sum of 1 + 2 + 3?
 
Введите ответ:
 
Уведомлеть о новых коментариях по почте.
 
Запомнить данные формы на этом компьютере.
 
 
Работает на Commentics