Equipment information

Leader 408NPS TV pattern generator
Manufacturer:
Model:
408NPS
Date:
Category:
Group:
Description:
NTSC/PAL/SECAM PATTERN GENERATOR

Information

The 408NPS corresponds to NTSC, PAL, and SECAM systems. The video sweep Generator and multiburst signal functions are used to check the frequency characteristics of video equipment, in addition, all-channel RF output allows the Generator to adjust and check TV and VTR sets having TV-band tuners. The GENLOCK and black burst functions make the universal pattern Generator a synchronizing signal source for various types of video equipments. The RF output using Synthesizer technique can be set the frequency directly from the front panel or internal data according to country name, band (VHF, UHF, and CATV) or channel. 1.2 FEATURES • Conforms to NTSC, PAL, and SECAM systems. • Provision of VHF, UHF, and CATV channels • Enables GENLOCK function {Sync only for the SECAM). • Sound signals, 1kHz and 400Hz, available, • Provision of Video sweep (100kHz to 15MHz, 2 bands selectable). • RF signal using Synthesizer technique. • RF modulation capability for EXT VIDEO. • RGB output connector (rectangular, 8-pin, TTL level) provided as standard. • 21-pin multiconnector provided as standard. • Y/C separation connectors (S and BNC) provided as standard. • Up to 100 addresses can be programmed (selectable address range). • Remote control function permits address controls. • The GPIB Interface provided as an option.

show more

User Manual
Manual Type:
User Manual
Pages:
86
Size:
2.41 Mbytes (2523270 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2015 06 09
MD5:
d0caedcc52610b327b59c6f00a1cbf5f
Downloads:
859

Information

1. GENERAL INFORMATIONS ... 1-1 1.1 INTRODUCTION ... 1-1 1.2 FEATURES ... 1-1 1.3 SPECIFICATIONS ... 1-1 1.3.1 Color Systems ... 1-1 1.3.2 Patterns ... 1-1 1.3.3 Sync Signal ... 1-3 1.3.4 Mode Control ... 1-3 1.3.5 Amplitude Preset ... 1-3 1.3.6 Front Panel Output ... 1-4 1.3.7 Rear Panel Output ... 1-4 1.3.8 Rear Panel Input ... 1-7 1.3.9 Presetting., ... 1-7 1.3.10 Others ... 1-7 2. PRECAUTIONS ... 2*1 3. PANEL DESCRIPTIONS ... 3-1 3.1 Front Panel ... 3-1 3.2 Rear Panel ... 3-2 4. OPERATING INSTRUCTIONS ... 4-1 4.1 Power Supply ... 4-1 4.2 Pattern Selection ... 4-2 4.3 Turning Sync and Burst Signal On/Off ... 4-7 4.4 Level Settings for Luminance, Chroma, Burst, and Sync Signal ... 4-8 4.5 Video Signal Output ... 4-9 4.6 Sync Signal ... 4-12 4.7 RF Output ... 4-13 4.8 Sound Signal Output ... 4-15 4.9 GENLOCK ... 4-16 4.10 Remote Control ... 4-17 4.11 Function Keys and Setting Items ... 4-18 4.12 Menu Structure ... 4-21 4.13 Setting Method of Each Item in the Menu ... 4-23 5. TEST PATTERNS ... 5-1 5.1 Color Bar Patterns ... 5-1 5.2 Raster Pattern ... 5-6 5.3 Multiburst and Sweep Patterns ... 5-7 5.4 DEM Pattern ... 5-9 5.5 5 STEP, 10 STEP, and APL Patterns ... 5-10 5.6 Checker Pattern ... 5-11 5.7 Window Pattern ... 5-12 5.8 Convergence and Alignment Patterns ... 5-14 5.9 Circle Pattern ... 5-15 5.10 Moving Marker ... 5-15 5.11 Applications of the Patterns ... 5-16

show more