Equipment information
Daetron MC400 Test Set
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Daetron MC400 ?
If you have any other manuals for the
Daetron MC400 you can upload the files here .
Model:
MC400
Date:
1989
Category:
Group:
Description:
Component Analyser/Capacitance Meter
Information
The Daetron model MC400 is a compact hand held 4 digit LCD
Component Analyser/Capacitance Meter capable of measuring
over the full range of 0.1 pF to 1 FARAD (999.9 mF), In
completely autoranging or manual modes, this instrument
incorporates so many features that the user is well advised
to read and understand this manual thoroughly so as to avoid
any misunderstandings about how the unit works. Complex
procedures Involving certain features could lead an unwary
user to thin* the unit is not working properly.
The basic method of measuring capacitance involves the use
of charging and discharging the capacitor while counting the
time of this cycle, the cycle time is converted to display a
value which Is equivalent to the value of the capacitor
under test, the microprocessor controlling the circuitry
senses when the value of any capacitor is over ranged for
that value and switches to the next higher range resistor.
Component analysing Is carried out by scanning any component
mounted In the top 3 receptacles of the transistor socket
and monitoring the behavior of the voltage outputs that
these components produce. For operating the component
analyser at its optimum level see the section on the AC adaptor.
Manual Type:
User Manual
Pages:
47
Size:
33.64 Mbytes (35276969 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2015 05 09
MD5:
bceac9c71e2b2dbf637c8b861e1bebe7
Downloads:
965
Information
SECTION 1 GENERAL INFORMATION
1.1 INTRODUCTION
1.2 INSTALLING THE BATTERY
1.3 PREDICTING BATTERY FAILURE.
1.4 USING THE OPTIONAL AC BATTERY ADAPTOR (DAETRON MODEL PS100)
1.5 ACCESSORIES INCLUDED
1.6 GETTING STARTED
1.7 ENTERING IN INFORMATION ON THE KEYPAD
SECTION 2 GENERAL OPERATION
2.1 MEASURING CAPACITANCE
2.2 USING THE FUNCTION HOLD KEY
2.3 ENTERING A ZERO VALUE FROM THE KEYPAD
2.4 MANUAL RANGE OPERATION
2.5 MEASURING LEAKAGE
2.6 SORTING CAPACITORS