Equipment information
Icom FP-561 Plotter
Manufacturer:
Page 1 of 5
Page 2 of 5
Page 3 of 5
Page 4 of 5
Page 5 of 5
If you have any other photos or manuals for the
Icom FP-561 you can upload the files here .
Model:
FP-561
Date:
1999
Category:
Group:
Description:
MARINE PLOTTER/SOUNDER
Information
FP-561
‘ GENERAL
• Display : 5.6 inch TFT color LCD (320×234 pixels)
• Power Supply requirement : 11–30 V DC
• LCD brightness : 16 levels
• Power consumption : Less than 22 W (Less than 1.8 A at 12 V DC)
• Dimensions (projections not included) : 186(W)×203(H)×102(D) mm; 75⁄16(W)×8(H)×4(D) in
• Weight (approx.) : 2.2 kg; 4 lb 14 oz
• Usable temperature range : 0°C to +50°C; +32°F to +122°F
• Unit of water depth : m (meter), FT (feet), FM (fathom)
• Unit of water temperature : °C, °F
• Unit of speed : KT (knots), km/h, MI/h (miles/h)
• Unit of distance : NM (nautical miles), km, MI (miles)
• Input data format : NMEA0183, Water temp./speed, DGPS
• Output data format : NMEA0183 (GGA, GLL, XTE, AAM, VTG, BOD, WPL, BWC),
Start-stop serial forward; 4800 bps
‘ GPS
• Receive system : 12 parallel-channel, all-in-one view
• Receive frequency : 1575.42 MHz (±1 MHz)
• Measuring accuracy (2DRMS) : Position 100 m, 95% of the time, PDOP≤3 (Less than 100 m, S/A OFF)
Speed Less than 1 m/sec. (PDOP≤3, S/A ON)
NOTE: All GPS receivers are subject to degradation of position and velocity accuracy under the U.S. Department of
Defence.
• Data renewed interval : 1 sec.
‘ Plotter
• Scale setting : 16 steps
• Plotting interval : 5 sec. to 60 min., 0.01–9.99 NM*
• No. of track memories : 5000 (selectable from 7 colors)
• No. of route memories : 20 (50 points/route)
• No. of event markers : 500
• Navigation computer : Vessel position (longitude/latitude), cursor position, distance, elapsed time,
course-out distance, direction, distance, time
• Data indication : Coastline, place name, contour line, route, lighthouse, longitude/latitude line
• Alarm : Area and Arrival alarms
VIDEO Sounder
• Transmission freq. : 50 kHz, 200 kHz
• Output power : 500 W RMS
• Water depth range : 5–640 m* in 8-color indication
• Water temp. range : 0°C to +40°C; +32°F to +104°F
• Speed range : 0.0–99.9 KT*
• Bottom lock expansion range : 5 m*, 10 m*, 20 m*, 40 m*
• Phase shift variable range : 1–640 m*
• Type of display screen : Standard, A-scope, dual frequencies, bottom and marker zoom
• Picture sweep speed : 6 levels including pause
• Alarm : Shallow, depth and fish school
*selectable in each unit
Manual Type:
Service Manual
Pages:
48
Size:
2.85 Mbytes (2983897 Bytes)
Language:
english
Revision:
Manual-ID:
S-13602II-CD
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2012 06 17
MD5:
8d256c7215e6442e7df734bb5105d903
Downloads:
1691
Information
This service manual describes the latest service information
for the FP-561 MARINE PLOTTER/SOUNDER and RD-200
DGPS BEACON Receiver at the time of publication.
SECTION 1 SPECIFICATIONS
1-1 FP-561 ... .1-1
1-2 RD-200 ... .1-2
SECTION 2 INSIDE VIEWS
2-1 FP-561 ... .2-1
2-2 RD-200 ... .2-2
SECTION 3 CIRCUIT DESCRIPTION
3-1 Transmitter CIRCUITS ... .3-1
3-2 Receiver CIRCUITS ... .3-1
3-3 REGULATOR CIRCUITS ... .3-2
3-4 INTERFACE CIRCUITS ... .3-3
3-5 LOGIC CIRCUITS ... .3-3
3-6 DGPS Receiver ... .3-4
3-7 PORT ALLOCATIONS ... .3-5
SECTION 4 ADJUSTMENT PROCEDURES
4-1 PREPARATION ... .4-1
4-2 FP-561 Transmitter ADJUSTMENT ... .4-2
4-3 FP-561 Receiver ADJUSTMENT ... .4-2
4-4 FP-561 WATER TEMPERTUREM ADJUSTMENT ... .4-2
4-5 RD-200 ADJUSTMENTS ... .4-4
SECTION 5 PARTS LIST
SECTION 6 MECHANICAL PARTS AND DISASSEMBLY
SECTION 7 SEMI-CONDUCTOR INFORMATION
SECTION 8 BOARD LAYOUTS
8-1 FP-561
8-1-1 SW UNIT ... .8-1
8-1-2 LOGIC UNIT ... .8-3
8-1-3 MAIN UNIT ... .8-5
8-2 RD-200
8-2-1 MAIN UNIT ... .8-7
8-2-2 ANT UNIT ... .8-9
SECTION 9 BLOCK DIAGRAM
9-1 FP-561 ... .9-1
9-2 RD-200 ... .9-2
SECTION 10 VOLTAGE DIAGRAM
10-1 FP-561 ... .10-1
10-2 RD-200 ... .10-3