Informações do equipamento

ADC Corporation 6244 Fonte de alimentação
ADC Corporation
Modelo: 6244
Data: 2007
Categoria: Instrumentos de medição
Grupo: Fonte de alimentação
Descrição: DC Voltage Current Source/Monitor
                                    The 6243/44 is a DC Voltage Current Source/Monitor featuring
a wide source and measurement range as
indicated below.
6243: Voltage 0 to ±110 V; Current 0 to ±2 A
6244: Voltage 0 to ±20 V; Current 0 to ±10 A
The 6243/44 features high accuracy with a source resolution
of 4-1/2 digits and a measurement resolution of
5-1/2 digits. As well as various types of sweeping functions
and a capacity for measuring pulses with a minimum
width of 1 ms. These features make the product a highly
suitable power source, for characteristic testing
systems testing characteristics and for evaluation in the
research and development fields for
semiconductors and other electronic components.
The features of this product are indicated below.
• Source, measurement range 6243: ±2 A up to ±32 V
±1 A up to ±64 V
±0.5 A up to ±110 V
6244: ±10 A up to ±7 V
±4 A up to ±20 V
See Figure 1-1.
• Voltage source/measurement range 6243: 320 mV-110 V
6244: 320 mV-20 V
• Current source/measurement range 6243: 32 μA-2 A
6244: 320 μA-10 A
• Voltage digits/measurement digits 6243: Source 4-1/2
digits/Measurement 5-1/2 digits
6244: Source 4-1/2 digits/Measurement 5-1/2 digits
• Voltage source/measurement resolution 6243: Source 10
μV/Measurement 1 μV
6244: Source 10 μV/Measurement 1 μV
• Current source/measurement resolution 6243: Source 1
nA/Measurement 100 pA
6244: Source 10 nA/Measurement 1 nA
• Voltage source current measurement (VSIM)/Current source
voltage measurement (ISVM)
• Voltage source voltage measurement (VSVM)/Current source
current measurement (ISIM)
• Sink-enabled bipolar output
• Minimum pulse width: 1 ms
• Linear, log, random sweep functions for characteristic tests
• Limiter (compliance), oscillation, overload, overheat
• Synchronized operation by integrating 2 or more units of
the 6243/44
• GPIB for integrating an automated measurement system as

Estes manuais estão disponíveis para os equipamentos acima:

ADC Corporation -- 6244 -- Manual do Usuário
Nome do arquivo: ADC-8775-Manual-Page-1-Picture
Tipo manual: Manual do Usuário
Páginas: 298
Tamanho: 2.77 Mbytes (2901596 Bytes)
Língua: Inglês
Revisão: First Printing
Manual-ID/número: FOE-8440045E00
Data: 30 Março 2007
Qualidade: Documento eletrônico, digitalização, bem legível.
Upload de data:
MD5: 022f355cd1632aa0ee8b3057b6445115
Downloads: 207 desde 05 Fevereiro 2017
This document describes the operations, functions and remote
programming of 6243/44 DC Voltage/Current
Source/Monitor operations.
This document refers the 6243/44 ROM version B00 or later.
(To confirm the ROM version, refer to Section 1.5,
“Operational Check.”)
The following functions are not available for the 6243/44
ROM version A02 or earlier.
• Function for switching the pulse width for external
single-line output
The default is always set to 20 μs.
• TR6143 Mode 2 function
Only the Original Mode and TR6143 Mode 1 functions are
1. Contents of this Manual
This document consists of the following chapters:
Safety Summary Read before using the 6243/44
1. INTRODUCTION Describes the supplied accessories,
operating environment, and how to check the 6243/44
2. OPERATION Describes the front and rear panel operation.
Basic operation and measurement examples are given.
3. REFERENCE The buttons and keys on the front panel, parameter
groups, parameter items, and functions are explained.
Explains, in detail, functions used to
perform measurements accurately.
5. REMOTE PROGRAMMING Explains the GPIB interface, hardware
connections, the
GPIB setup, and lists GPIB commands and programming
6. COMPATIBILITY WITH TR6143 Explains the TR6143 compatibility.
7. PERFORMANCE TESTS Explains operations used to confirm
that the 6243/44 is
operating correctly within acceptable limits.
8. CALIBRATION Explains how to calibrate the 6243/44 to ensure
operation within acceptable limits.
9. SPECIFICATIONS Describes the 6243/44s specifications.
A.1 When Problems Occur (Before Requesting
A.2 Error Message List Error messages are explained here.
DIMENSIONAL OUTLINE DRAWING External dimensions: Describes
the external dimensions.
Iniciar Download grátis

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Is it true or false that green is a number?
Powered by Commentics