Equipment information
Hewlett Packard 8012B Generator
Manufacturer:
Page 1 of 2
Page 2 of 2
If you have any other photos or manuals for the
Hewlett Packard 8012B you can upload the files here .
Model:
8012B
Date:
1977
Category:
Group:
Description:
Pulse Generator
Information
The 8012B is an extremely versatile, easy-
to-operate pulse Generator with a wide range of
applications. It has a complete set of variable pulse
parameters with a repetition rate of 0—50 MHz and transition
times as low as 5ns. This makes it ideal for testing digital
logic: RTL, DTL, TTL, some ECL and some MOS can be
dynamically tested and noise patterns can be simulated. Any
triangular or trapezoidal waveforms can be generated (up to
a maximum ratio of 1:100 or 100:1 between leading and
trailing edge transitions) over the entire frequency range.
The pulse polarity can be set to positive or negative and
the pulse output format to symmetrical, normal or complement
using front panel switches, without affecting pulse
amplitude or offset.
The complement format can be used to obtain duty cycles of
100% and symmetrical format provides a means of checking
device threshold, driving operational amplifiers and
simulating Amplifier outputs.
The 8012B has a selectable source impedance
which makes impedance matching to the circuit under test
very simple. It also has a square wave facility that is
independent of width and delay settings and a double pulse
facility that is useful for testing device recovery times
and making noise immunity measure
Manual Type:
Service and User Manual
Pages:
117
Size:
46.41 Mbytes (48659490 Bytes)
Language:
english
Revision:
Manual-ID:
08012-90505
Date:
Quality:
Scanned document, all readable.
Upload date:
2013 11 30
MD5:
b787be697bd92739367b70ccc9cdf500
Downloads:
957
Information
This manual applies directly to instruments with serial
number 1633 G 00491 and higher. Any changes made in
instruments having serial numbers higher than the above
number will be found in a "Manual Changes” supplement
supplied with this manual. Be sure to examine this
supplement for any changes which apply to your instrument
and record these changes in the manual.