Informacje o sprzęcie

Tektronix 2215A Oscyloskop
Producent:
Tektronix
Modelu: 2215A
Data: 1983
Kategorii: Przyrządy pomiarowe
Grupa: Oscyloskop
Opis: Dual Channel 60MHz Oscilloscope
Informacje:
                                    The TEKTRONIX 2215A Oscilloscope is a rugged, lightweight,
dual-channel, 60-MHz instrument that features a bright,
sharply defined trace on an 80- by 100-mm cathode-ray tube
(crt). Its vertical system provides calibrated deflection
factors from 2 mV per division to 5 V per division. Trigger
circuits enable stable triggering over the full bandwidth of
the vertical system. The horizontal system provides
calibrated sweep speeds from 0.5 s per division to 50 ns per
division along with delayed-sweep features. A X10 magnifier
circuit extends the maximum sweep speed to 5 ns per division
when the A and B SEC/DIV switch is set to 0.05 per division.

Te Podręczniki są dostępne dla powyższego urządzenia:

Tektronix -- 2215A -- Instrukcja serwisowa
Nazwa pliku: Tektronix-1776-Manual-Page-1-Picture
Typ instrukcji: Instrukcja serwisowa
Stron: 203
Rozmiar: 33.42 Mbytes (35047502 Bytes)
Język: Angielski
Zmiana:
Podręcznik numer: 070-4735-00
Data: lipiec 1984
Jakość: Skanowany dokument, wszystko czytelne.
Data wysłania:
MD5: 5db93475a54ac15fce043f0e260cd7d1
Pliki do pobrania: 2699 od 21 grudzień 2009
Informacje:
Tektronix-1776-Manual-Page-1-Picture
Start do pobrania za darmo


Tektronix -- 2215A -- Instrukcja obsługi
Nazwa pliku: Tektronix-2570-Manual-Page-1-Picture
Typ instrukcji: Instrukcja obsługi
Stron: 46
Rozmiar: 36.90 Mbytes (38692414 Bytes)
Język: Angielski
Zmiana: Revised
Podręcznik numer: 070-4732-00
Data: grudzień 1983
Jakość: Skanowany dokument, wszystko czytelne.
Data wysłania:
MD5: 7f2f26266d5b5cf0cef3a5b7bf0c6170
Pliki do pobrania: 1381 od 18 czerwiec 2011
Informacje:
Tektronix-2570-Manual-Page-1-Picture
Start do pobrania za darmo


Tektronix -- 2215A -- Instrukcja serwisowa
Nazwa pliku: Tektronix-8936-Manual-Page-1-Picture
Typ instrukcji: Instrukcja serwisowa
Stron: 203
Rozmiar: 38.84 Mbytes (40729394 Bytes)
Język: Angielski
Zmiana: revised
Podręcznik numer: 070-4735-00
Data: 01 lipiec 1984
Jakość: Skanowany dokument, wszystko czytelne.
Data wysłania:
MD5: 4a02cf3d1ad6e050d923201c743ed599
Pliki do pobrania: 63 od 23 kwiecień 2017
Informacje:
LIST OF ILLUSTRATIONS
........................................iii

LIST OF TABLES
......................................................iii

OPERATORS SAFETY SUMMARY ..........................iv

SERVICING SAFETY SUMMARY..............................v

SECTION 1 SPECIFICATION

INTRODUCTION ................................1-1

ACCESSORIES..................................1-1

PERFORMANCE CONDITIONS ________1-1

SECTION 2 OPERATING INSTRUCTIONS

PREPARATION FOR USE ................2-1

SAFETY ........................................2-1

LINE VOLTAGE ............................2-1

POWER CORD ..............................2-1

LINE FUSE ....................................2-1

INSTRUMENT COOLING..............2-2

CONTROLS, CONNECTORS, AND

INDICATORS......................................2-2

POWER, DISPLAY, AND PROBE

ADJUST ........................................2-2

VERTICAL ....................................2-3

HORIZONTAL................................2-4

TRIGGER ......................................2-5

REAR PANEL ................................2-7

OPERATING CONSIDERATIONS ...	2-8

GRATICULE ..................................2-8

GROUNDING ................................2-8

SIGNAL CONNECTIONS ..............2-8

INPUT COUPLING CAPACITOR

PRECHARGING ............................2-8

OPERATOR'S ADJUSTMENTS ________2-9

INTRODUCTION ..........................2-9

BASELINE TRACE........................2-9

TRACE ROTATION........................2-9

PROBE COMPENSATION ............2-10

SECTION 3 THEORY OF OPERATION

INTRODUCTION ................................3-1

SECTION ORGANIZATION ..........3-1

INTEGRATED CIRCUIT DESCRIPTIONS
............................................3-1

GENERAL DESCRIPTION ................3-2

DETAILED CIRCUIT DESCRIPTION	3-3

VERTICAL ATTENUATORS..........3-3

VERTICAL PREAMPLIFIERS ...	3-4
SECTION 3 THEORY OF OPERATION (cont)

CHANNEL SWITCH AND

VERTICAL OUTPUT .......... 3-5

TRIGGER AMPLIFIERS AND

SWITCHING ................. 3-7

A TRIGGER GENERATOR............3-8

A SWEEP GENERATOR AND

LOGIC............................................3-9

ALTERNATE B SWEEP ................3-11

HORIZONTAL ................................3-13

Z-AXIS AMPLIFIER ......................3-14

POWER SUPPLY AND PROBE

ADJUST ........................................3-16

SECTION 4 PERFORMANCE CHECK PROCEDURE

INTRODUCTION ................................4-1

PURPOSE ..................................4-1

STRUCTURE ................................4-1

TEST EQUIPMENT ......................4-1

LIMITS AND TOLERANCES ....	4-1

PREPARATION FOR CHECKS ..	4-2 INDEX TO PERFORMANCE

CHECK STEPS ............................4-3

VERTICAL ....................................4-4

HORIZONTAL................................4-7

TRIGGER ......................................4-11

EXTERNAL Z-AXIS AND PROBE

ADJUST ........................................4-14

SECTION 5 ADJUSTMENT PROCEDURE

INTRODUCTION ................................5-1

PURPOSE ....................................5-1

STRUCTURE ................................5-1

TEST EQUIPMENT ......................5-1

LIMITS AND TOLERANCES ....	5-1

ADJUSTMENT INTERACTION ..	5-1 PREPARATION FOR

ADJUSTMENT ..............................5-1

INDEX TO ADJUSTMENT

PROCEDURE STEPS ..................5-3

POWER SUPPLY AND CRT DISPLAY	5-4

VERTICAL..........................................5-6

HORIZONTAL ....................................5-13

TRIGGER ..........................................5-19

EXTERNAL Z-AXIS AND PROBE

ADJUST ............................................5-23
MAINTENANCE
STATIC-SENSITIVE COMPONENTS
PREVENTIVE MAINTENANCE
INTRODUCTION .............
GENERAL CARE .............
INSPECTION AND CLEANING . .
LUBRICATION ...............
SEMICONDUCTOR CHECKS . . .
PERIODIC READJUSTMENT .. .
TROUBLESHOOTING............
INTRODUCTION .............
TROUBLESHOOTING AIDS
TROUBLESHOOTING
EQUIPMENT ................
TROUBLESHOOTING
TECHNIQUES ...............
CORRECTIVE MAINTENANCE
INTRODUCTION .............
MAINTENANCE PRECAUTIONS .
OBTAINING REPLACEMENT
PARTS .....................
MAINTENANCE AIDS .........
MAINTENANCE (cont)
INTERCONNECTIONS .........
TRANSISTORS AND
INTEGRATED CIRCUITS .......
SOLDERING TECHNIQUES ....
REMOVAL AND REPLACEMENT
INSTRUCTIONS ..............
REPACKAGING FOR SHIPMENT
SELECTABLE COMPONENTS ..

OPTIONS

REPLACEABLE ELECTRICAL PARTS

DIAGRAMS

REPLACEABLE MECHANICAL PARTS

Accessories
Tektronix-8936-Manual-Page-1-Picture
Start do pobrania za darmo


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the third letter of the word castle.
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics