Equipment information

Marconi 2022D Generator
Manufacturer:
Model:
2022D
Date:
1993
Category:
Group:
Description:
10 kHz - 1 GHz AM/FM SIGNAL GENERATOR

Information

FEATURES The 2022D is a light-weight synthesized signal Generator having a frequency range of 10 kHz to 1 GHz and providing comprehensive amplitude, frequency and phase modulation facilities with an RF output level range of -127 dBm to +13 dBm. It is designed to cover a wide range of RF applications in development, production and maintenance. Output frequency is phase locked to an internal or external frequency standard and frequencies up to 100 MHz can be set to a resolution of 10 Hz, and above that to a resolution of 100 Hz. Front panel operation is carried out by direct entry of required settings via the keyboard. Microprocessor control ensures flexibility, simplicity of use and allows programming by the General Purpose Interface Bus (GPIB).* This facility is offered as an option enabling the instrument to be used both as a manually operated bench mounted instrument or as part of a fully automated test system. Output Calibrated output levels from -127 dBm to +13 dBm are provided. A choice of ten output level unit combinations can be obtained on the front panel. The RF output level can be set to a resolution of 0.1 dB over the entire output voltage range. Protection against the accidental application of up to 50 W of reverse power is provided by a fast responding relay trip. Full protection is also provided when the instrument is switched off. An RF level offset capability allows the output level to be varied relative to the indicated value to compensate for external cable losses or to ensure that all instruments in a particular area give identical results. Modulation Amplitude, frequency and phase modulation can be provided by internal or external sources. AM depth can be set in 0.5% steps up to 99.5%, FM deviation up to 999 kHz and phase modulation up to 9.99 radians. An auxiliary modulation input allows dual modulation to be applied for receiver testing. An internal modulation Oscillator provides switch selected frequencies of 400 Hz, 1 kHz and 3 kHz. Front panel All data and units selected are visible on a single liquid crystal display. Data is entered on a keyboard that has been designed to be simple and logical to use. Carrier frequency, modulation and RF level functions may be incremented or decremented using the t (UP) and i (DOWN) keys. Non-volatile store and recall facilities are also provided using an electrically alterable read only memory that does not require a battery back-up system. A front panel cover for protecting the instrument in transit is available as an accessory. Second function mode of operation This enables a number of auxiliary functions such as setting the GP1B address, selection of alternative RF level calibration units, access to various calibration routines and an aid to diagnostic fault finding via the internal instrument bus.

show more

User Manual
Manual Type:
User Manual
Pages:
56
Size:
2.08 Mbytes (2178592 Bytes)
Language:
english
Revision:
Issue 7
Manual-ID:
46882-001W
Date:
Quality:
Scanned document, all readable.
Upload date:
2016 05 29
MD5:
b98564a28d1c6de1933faca04b9e5b69
Downloads:
756

Information

Includes information on Option 001 - GPIB interface

show more

User Manual
Manual Type:
User Manual
Pages:
10
Size:
146.33 Kbytes (149845 Bytes)
Language:
english
Revision:
Manual-ID:
46882-
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2016 05 29
MD5:
e64a3880d68ead37482208a096509b49
Downloads:
587

Information

Reference Card

show more