Apparatuur informatie

Advance Instruments OS250 Oscilloscoop
Advance Instruments
Model: OS250
Datum: 1974
Categorie: Meetinstrumenten
Groep: Oscilloscoop
Beschrijving: 10MHz dual trace oscilloscope
                                    The Advance OS250 Oscilloscope is a 10 MHz dual trace
instrument with a 10cm x 8cm display. It is designed
for use in general purpose laboratory work, educational
uses, TV and servicing applications.

It features two identical input channels with a maximum
sensitivity of 5mV/cm and a bandwidth of DC to 10MHz.
The two channels may be viewed separately, alternately
at fast timebase speeds, or chopped at a 250kHz rate at
low timebase speeds.

Particular attention has been paid to trigger performance,
and the system used includes a variable control with
bright line operation in the absence of a signal,
or when the trigger level is outside the range of
the input signal.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Advance Instruments -- OS250 -- Service-en gebruikershandleiding
Bestandsnaam: Advance-3823-Manual-Page-1-Picture
Manueel de Type: Service-en gebruikershandleiding
Pagina 's: 37
Grootte: 5.43 Mbytes (5693414 Bytes)
Taal: Engels
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 25a1a4bca32d7b2877973999d853fcaa
Downloads: 548 Sinds 31 december 2012
Start gratis downloaden

Advance Instruments -- OS250 -- Schema
Bestandsnaam: Advance-9410-Manual-Page-1-Picture
Manueel de Type: Schema
Pagina 's: 5
Grootte: 1.28 Mbytes (1341433 Bytes)
Taal: Engels
Datum: 01 januari 1974
Kwaliteit: Gescand document, zeer goed leesbaar.
Uploaden datum:
MD5: c04a522e9a75c6fb6e9fd0710eb4ce0d
Downloads: 9 Sinds 26 augustus 2017
Geüpload door: Alex
Info Note: All the schematics with good quality.
Start gratis downloaden

Commentaar (1)

Je dient een beoordeling: Advance Instruments OS250
0/5 (0)
OS250 user schreef...
Many thanks for the uploader, site creator and maintenance team! :) My oscilloscope This is my only oscilloscope, and im depending on him to do my school project. He always have been a got buddy, but now need some service.. and this manual are a great help! So far im i see that the Diode bridge (MR301) are not rectifying well.. he are producing a AC current on output, and the DC tension is about 30V (instead 155V, even if i adjust R320). But after i replace a Diode Bridge by a new ... Lees meer
5 April 2016 13.14
Pagina 1 van 1

Commentaar Toevoegen

* Verplichte informatie
(wordt niet getoond)
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
Which word in this sentence is bold?
Voer antwoord in:
Meld me over nieuwe berichten via email.
Onthoud mijn gegevens op deze computer.
Aangedreven door Commentics