Apparatuur informatie

Datron Instruments 1061A Digitale multimeter
Fabrikant:
Datron Instruments
Model: 1061A
Datum: 1988
Categorie: Meetinstrumenten
Groep: Digitale multimeter
Beschrijving: 6½ digit AUTOCAL Multimeter
Informatie:
                                    The Datron 1061, 1061A and 1071 AUTOCAL
multi-function, microprocessor controlled digital
voltmeters (DVM) are high precision measuring
instruments featuring exceptionally high stability
and systems capability. The basic instrument provides
full DC measurement capability, computation facilities,
self check routines and calibration memory.
In the AUTOCAL 1061A, operation of the Input Filter
key extends the display to 6½ digits to provide extra
resolution to 100nV.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Datron Instruments -- 1061A -- Gebruikershandleiding
Bestandsnaam: Datron-3806-Manual-Page-1-Picture
Manueel de Type: Gebruikershandleiding
Pagina 's: 75
Grootte: 3.57 Mbytes (3743055 Bytes)
Taal: Engels
Herziening: Issue 11
Handleiding-ID/Number: 850040
Datum: maart 1988
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: c693ea419387932b6be3289f7546b73a
Downloads: 486 Sinds 30 december 2012
Informatie:
Datron-3806-Manual-Page-1-Picture
Start gratis downloaden


Datron Instruments -- 1061A -- Gebruikershandleiding
Bestandsnaam: Datron-8187-Manual-Page-1-Picture
Manueel de Type: Gebruikershandleiding
Pagina 's: 73
Grootte: 3.46 Mbytes (3631077 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 850040
Datum: 01 maart 1988
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: b7c70d4046c10fc496abc3d6a9f59db5
Downloads: 54 Sinds 29 december 2016
Informatie:
SECTIO N 1
 TH E 1061/1061 A/1071 AUTOCAL INSTRUM ENTS
Standard and optional measurement facilities
Accessories
Principles of operation
SECTIO N 2
 BASIC M EASUREM ENT PROCEDURES
Maximum input voltages
Safety
Controls
DC voltage measurement procedure
AC voltage measurement procedure
Current measurement procedure
Resistance measurement procedure
Rear input
61⁄2 digits (1061A only) 71⁄2 digits (1071 only)
Display messages
SECTIO N 3
 ADVANCED OPERATIONAL PROCEDURES
"Manual', external triggers and ‘Hold'
Ratio measurement procedure
Self test
Spec mode
dB measurements (1061/1061A only)
Average mode measurements (1071 only)
Computation facility
Load/reset store
(A-B)
+ С
Max and M in procedure
Limits procedure
SECTIO N 4
 SYSTEMS APPLICATION V IA TH E IEEE INTERFACE
Connecting the 1061/1071 into a system
Address selection
Using the 1061/1071 in a system
Programming instructions
Control of D V M inputs
Control o f D V M output
Service request
Control of computing functions
Alternative method of programming
Calibration via the bus
High speed readings
Spec readout, test and input zero
Program string characteristics
Operational sequence guidelines
SECTION 5
 SYSTEM S APPLICATIONS VIA TH E BCD INTERFACE (1061 only)
DVM control commands
BCD output interpretation
SECTION 6
 INSTALLATION
Unpacking and inspection
Preparation for operation
Connectors and pin designations
SECTION 7
 S P EC IFIC A TIO N S
General
1071 specifications
1061/1061A specifications
Standard internal delays
SECTION 8
 SPEC IFIC A TIO N VERIFICATIO N
Introduction
Equipment requirements
1071 specification verification
1071 specification verification report sheet
1061 specification verification
1061 specification verification report sheet
1061A specification verification
1061A specification verification report sheet

Datron-8187-Manual-Page-1-Picture
Start gratis downloaden


Datron Instruments -- 1061A -- Servicehandboek
Bestandsnaam: Datron-8190-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 54
Grootte: 2.24 Mbytes (2345970 Bytes)
Taal: Engels
Herziening: Issue 9
Handleiding-ID/Number: 850045
Datum: 01 maart 1985
Kwaliteit: Gescande document, lezen deels slecht, deels niet leesbaar.
Uploaden datum:
MD5: aad378d515bd35ed8ddbc3a9a0866b9e
Downloads: 80 Sinds 29 december 2016
Informatie:
CALIBRATION AND SERVICING HANDBOOK

Datron-8190-Manual-Page-1-Picture
Start gratis downloaden


Datron Instruments -- 1061A -- Servicehandboek
Bestandsnaam: Datron-9552-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 202
Grootte: 79.53 Mbytes (83392725 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 850045
Datum: 01 januari 1984
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 505962e8482e0150e9e08e923f47b917
Downloads: 17 Sinds 24 september 2017
Informatie:
Calibration and Servicing Handbook

GENERAL DESCRIPTION .......................................... 

INSTALLATION................................................. I
Refer to

MEASUREMENT PROCEDURES...................................... i

SPECIFICATION AND SPECIFICATION
VERIFICATION..................... I User's Handbook

SYSTEMS APPLICATIONS.......................................... )

Section	Title	Page

1
CALIBRATION................................................................1

1.1
INTRODUCTION.........................................................1

1.1.1
General..........................................................1

1.1.2	Essentials for Good
Calibration..........................................1

1.1.3
The'AUTOCAL'Process..............................................1

1.2	DC VOLTAGE CALIBRATION
...............................................2

1.3	OHMS
CALIBRATION.....................................................4

1.4	AC VOLTAGE CALIBRATION - OPTION 10
ONLY.................................6

-	OPTION 12 ONLY................................7A

1.5	DC CURRENT CALIBRATION
...............................................8

1.6	AC CURRENT CALIBRATION
...............................................9

1.7	'AUTOCAL' USING
'KEYBOARD'............................................10

1.8	'AUTOCAL' OVER THE BUS
...............................................11

2	MECHANICAL
DESCRIPTION.....................................................13

2.1
GENERAL.............................................................13

2.2	FRONT
PANEL.........................................................13

2.3	REAR
PANEL..........................................................13

2.4	EXTERNAL
CONSTRUCTION...............................................13

2.5	INTERNAL
CONSTRUCTION...............................................13

3	TECHNICAL
DESCRIPTION......................................................15

3.1
INTRODUCTION........................................................15

3.2	ANALOG ASSEMBLY
....................................................15

3.2.1	Analog
Interface...................................................15

3.2.1.1
Introduction................................................15

3.2.1.2
Power-On..................................................15

3.2.1.3	General Interface Update
Sequence.................................17

3.2.1.4
Test.....................................................17

3.2.2	DC Isolator
Section.....*............................................17

3.2.2.1	Preamplifier
Scaling...........................................17

3.2.2.2
Preamplifier................................................20

3.2.2.3	DC
Bootstrap...............................................20

3.2.2.4
Filtering..................................................20

3.2.2.5	Input Current
Compensation.....................................21

3.2.2.6
Test.....................................................21

3.2.3	Analog to Digital Conversion (Analog
Section)...............................21

3.2.3.1	General
Principles............................................21

3.2.3.2	A-D Input
Control...........................................23

3.2.3.3	Reference Voltages and Control Logic Power
Supply.....................23

3.2.3.4	High Speed
Buffer............................................24

3.2.3.5
Integrator.................................................24

3.2.3.6	1st Null
Detector.............................................25

3.2.3.7	2nd Null
Detector............................................25

3.2.3.8	Reset
Period................................................25

3.3	OPTION 10 AC
ASSEMBLY.................................................27

3.3.1	General
Principles..................................................27

3.3.2	Preamplifier and
Scaling..............................................27

3.3.3	RMS Converter
...................................................28

3.3.4	High Frequency
Compensation.........................................29

3.3.5	Frequency
Detection................................................29

3.3.6
Test...........................................................29

A3.3 OPTION 12 AC
ASSEMBLY................................................A27

A3.3.1 General
Principles.................................................A27

A3.3.2 Preamplifier and
Scaling.............................................A27

A3.3.3 RMS
Converter...................................................A28

A3.3.4 High Frequency
Compensation........................................A29

A3.3.5 Frequency
Detection...............................................A29

A3.3.6
Test..........................................................A29

3.4	OHMS
ASSEMBLY.......................................................30

3.4.1	Low Drift Voltage
Follower...........................................30

3.4.2	Constant Current
Source..............................................30

3.4.3
Test...........................................................31

3.5	CURRENT ASSEMBLY
...................................................31

3.5.1	Current
Measurements...............................................32

3.5.2
Test...........................................................32

3.6	REAR INPUT/RATIO
INPUT................................................32

3.6.1
General.........................................................32

3.6.2	Front Panel/Rear Panel
Input..........................................32

3.6.3
Ratio..........................................................32

3.6.4
Test...........................................................33

3.7	ANALOG
OUTPUT.......................................................33

3.7.1
General.........................................................33

3.7.2
Description......................................................33

3.8	DIGITAL ASSEMBLY
....................................................33

3.8.1	Processor and
Memory...............................................33

3.8.1.1	Software
Overview............................................34

3.8.1.2	The Two-Phase
Clock..........................................35

3.8.1.3	RAM/ROM
Circuit...........................................36

3.8.2	CMOS Address Decode and Input/Output
Circuits.............................36

3.8.3	Analog to Digital Conversion (Digital
Section)...............................39

3.8.3.1	General
Principle.............................................39

3.8.3.2	Preset
Procedure.............................................39

3.8.3.3	A-D Measurement
Sequence.....................................41

3.8.3.4	Master Clock and Line Locking
...................................41

3.9	FRONT PCB ASSEMBLY
..................................................42

3.9.1	Analog Input
Signals................................................42

3.9.2	Display
Signals....................................................42

3.9.3	Keyboard Data
Encode...............................................42

3.9.4	Keyboard LED Data
Decode...........................................43

3.10	DISPLAY DRIVER
ASSEMBLY..............................................45

3.10.1	Write
Mode......................................................45

3.10.2	Read
Mode.......................................................45

3.11	IEEE DIGITAL
INTERFACE................................................46

3.11.1	ROM
Circuit......................................................46

3.11.2	Interface
Circuit...................................................46

3.12	BCD DIGITAL
INTERFACE.................................................47

3.12.1	RAM/ROM
Circuit.................................................47

3.12.2	Interface
Circuit...................................................47

3.13	REAR (POWER SUPPLY) PCB
ASSEMBLY......................................48

3.13.1
General.........................................................48

3.13.2	180V
Supply.....................................................48

3.13.3	5V
Supply.......................................................48

3.13.4	±15V
Supply.....................................................48

3.14	SELF TEST
SEQUENCE...................................................48

4	INTERNAL ADJUSTMENT
PROCEDURES............................................51

4.1	ALTERATION OF LINE VOLTAGE AND
FREQUENCY.............................51

4.1.1	Changing Line
Voltage...............................................51

4.1.2	Changing Line
Frequency.............................................51

4.2	BATTERY
REPLACEMENT.................................................51

4.3	POST-REPAIR
PROCEDURES...............................................51

4.3.1	Basic DC
Instrument................................................52

4.3.2	Ohms
Assembly...................................................53

4.3.3	AC Assembly (Option
10).............................................54

4.3.4	AC Assembly (Option
12).............................................55

APPENDIX 1 ANALOG DATA LINE 'F.E.T.'
PATTERNS................................57

Datron-9552-Manual-Page-1-Picture
Start gratis downloaden


Commentaar

Nog geen berichten.

Commentaar Toevoegen

* Verplichte informatie
(wordt niet getoond)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Which is darker: black or white?
 
Voer antwoord in:
 
Meld me over nieuwe berichten via email.
 
Onthoud mijn gegevens op deze computer.
 
 
Aangedreven door Commentics