Apparatuur informatie

Tektronix TDS 420A Oscilloscoop
Fabrikant:
Tektronix
Model: TDS 420A
Datum: 1995
Categorie: Meetinstrumenten
Groep: Oscilloscoop
Beschrijving: Digitizing Oscilloscope
Informatie:
                                    Your Tektronix digitizing oscilloscope is a superb tool
for acquiring, displaying, and measuring waveforms.
Its performance addresses the needs of both lab and
portable applications with the following features:
400 MHz maximum analog bandwidth on the TDS 460A
200 MHz maximum analog bandwidth on the TDS 410A and TDS 420A
100 Megasamples/second maximum digitizing rate
Roll mode and triggered roll mode for display of slower
waveforms
Waveform Math — Invert a single waveform and add,
subtract, and multiply two waveforms. On instruments
equipped with option 2F, integrate or differentiate a
single waveform or perform an FFT (fast fourier transform)
on a waveform to display its magnitude or phase versus
its frequency.
Up to 30,000-point record length per channel (120,000-point
optional)
Full GPIB software programmability. GPIB hardcopy
output. On instruments equipped with option 13, hardcopy
output using the RS-232 or Centronics ports. On-board
printer capability with option 3P instruments.
Complete measurement and documentation ability
Intuitive graphical icon operation blended with the
familiarity of traditional
horizontal and vertical knobs
Four channels and four eight-bit digitizers on TDS 420A
and TDS 460A.
Two channels and two eight-bit digitizers on TDS 410A.
On-line help at the touch of a button

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Tektronix -- TDS 420A -- Servicehandboek
Bestandsnaam: Tektronix-2539-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 288
Grootte: 4.16 Mbytes (4358985 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-9703-06
Datum:
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 9fb3d32a15acdf10d081115219475c1e
Downloads: 1117 Sinds 18 juni 2011
Informatie:
This document applies to instruments with serial
numbers B050000 and above.
Tektronix-2539-Manual-Page-1-Picture
Start gratis downloaden


Tektronix -- TDS 420A -- Gebruikershandleiding
Bestandsnaam: Tektronix-4508-Manual-Page-1-Picture
Manueel de Type: Gebruikershandleiding
Pagina 's: 292
Grootte: 2.44 Mbytes (2558950 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-9219-00
Datum: 1995
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 78eadd99bad5ddff7758019af5eaf57b
Downloads: 529 Sinds 25 april 2013
Informatie:
Table of Contents
List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
General Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Getting Started
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3
Operating Basics
Functional Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
At a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–13
Reference
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Accessing Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3
Acquisition Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5
Delayed Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13
Determining Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–19
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–21
Edge Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–27
File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–31
Hardcopy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–35
Horizontal Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–45
Limit Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–53
Measuring Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–59
Probe Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–71
Probe Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–81
Probe Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–83
Remote Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–89
Roll Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–93
Saving and Recalling Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–97
Saving and Recalling Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–101
Selecting Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–107
Setting Up Automatically: Autoset and Reset . . . . . . . . . . . . . . . . . . . 3–111
Signal Path Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–113
Taking Cursor Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–115
Vertical Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–121
Video Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–125
Waveform Math . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–131
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–135
Appendices
Appendix A: Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . A–1
Appendix B: Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1
Appendix C: Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1
Appendix D: Packaging for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . D–1
Appendix E: Factory Initialization Settings . . . . . . . . . . . . . . . . . . . . . E–1
Appendix F: Remote Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F–1
Tektronix-4508-Manual-Page-1-Picture
Start gratis downloaden


Tektronix -- TDS 420A -- Gebruikershandleiding
Bestandsnaam: Tektronix-8882-Manual-Page-1-Picture
Manueel de Type: Gebruikershandleiding
Pagina 's: 433
Grootte: 2.36 Mbytes (2474180 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-9876-00
Datum:
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 39db048a34ae4f74d557bf84de9eaebc
Downloads: 56 Sinds 15 april 2017
Informatie:
Programmer Manual

This programmer manual covers the TDS 420A, 430A, 460A,
510A, 520C,
540C, 620B, 644B, 680B, 684B, 724C, 754C, & 784C. It also
covers Advanced
DSP Math (optional on the TDS420A, 430A, 460A, 510A, 520C,
540C, 620B,
& 680B), the RS-232/Centronics Interface (optional on the
TDS 420A, 430A,
460A, 510A, 520C, 540C, 620B, & 640B), and the Option 05
Video Trigger.
This manual provides information on operating your
oscilloscope using the
General Purpose Interface Bus (GPIB) interface.
Tektronix-8882-Manual-Page-1-Picture
Start gratis downloaden


Commentaar

Nog geen berichten.

Commentaar Toevoegen

* Verplichte informatie
(wordt niet getoond)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Type the numbers for four hundred seventy-two.
 
Voer antwoord in:
 
Meld me over nieuwe berichten via email.
 
Onthoud mijn gegevens op deze computer.
 
 
Aangedreven door Commentics