Apparatuur informatie

Fluke PM6681R Frequentieteller
Fabrikant:
Fluke
Model: PM6681R
Datum: 2003
Categorie: Meetinstrumenten
Groep: Frequentieteller
Beschrijving: Timer Counter Analyzer
Informatie:
                                    

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Manueel de Type: Servicehandboek Fluke-2359-Manual-Page-1-Picture
Pagina 's: 153
Grootte: 9.76 Mbytes (10231010 Bytes)
Taal: Engels
Herziening: Second edition
Handleiding-ID/Number: 4822 872 20116
Datum: juni 2003
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 65129655dc5b7ef99db1653d0bb82ce3
Downloads: 1933 Sinds 29 januari 2011
Informatie:
Fluke-2359-Manual-Page-1-Picture


Manueel de Type: Gebruikershandleiding Fluke-10143-Manual-Page-1-Picture
Pagina 's: 276
Grootte: 2.56 Mbytes (2688515 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum: 01 januari 2000
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: c8644ab9a721ad4e904f1a7cfe3ec16d
Downloads: 57 Sinds 20 januari 2018
Informatie:
Programming Manual

You should use this ProgrammingManual
 together
 with
 thePM6680B/1/5 Operators Manual.
That manual contains specificationsfor the counter and
explanations of
the possibilities and limitations of the
different measuring functions.
Sections
The chapters in this manual are di-
vided into three sections aimed at dif-
ferent levels of reader knowledge.
The ‘General’ Section, which can be
disregarded by the users who know
the IEEE-488 and SCPI standards:
– Chapter 2 Bus Commands for the
Benchtop User gives bus com-
mands for the front panel keys.
– Chapter 3 Introduction to SCPI
explains syntax data formats, sta-
tus reporting, etc.
The Practical Section of this manualcontains:
– Chapter 4, Programming Exam-
ples, with examples of typical pro-
grams for a wide variety of appli-
cations. These programs are writ-
ten in GW-basic and C.
This Manual
The ‘Programmers Reference’ Sec-
tion of this manual contains:
– Chapter 5, Instrument Model ex-
plains how the instrument looks
from the bus. This instrument is
not quite the same as the one used
from the front panel.
– Chapter 6 Using the Subsystems
explains more about each subsys-
tem.
– Chapter 7, How to Measure Fast
is a set of measuring situations
which the user is often confronted
with when programming a counter.
This chapter also contains infor-
mation about how to use the more
complex subsystem.
– Chapter 8, Error Messages con-
tains a list of all error messages
that can be generated during bus
control.
– Chapter 9, Command Reference,
This chapter gives complete infor-
mation on all commands. The sub-
systems and commands are sorted
alphabetically.
Fluke-10143-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics