Apparatuur informatie

Tektronix 2215A Oscilloscoop
Fabrikant:
Tektronix
Model: 2215A
Datum: 1983
Categorie: Meetinstrumenten
Groep: Oscilloscoop
Beschrijving: Dual Channel 60MHz Oscilloscope
Informatie:
                                    The TEKTRONIX 2215A Oscilloscope is a rugged, lightweight,
dual-channel, 60-MHz instrument that features a bright,
sharply defined trace on an 80- by 100-mm cathode-ray tube
(crt). Its vertical system provides calibrated deflection
factors from 2 mV per division to 5 V per division. Trigger
circuits enable stable triggering over the full bandwidth of
the vertical system. The horizontal system provides
calibrated sweep speeds from 0.5 s per division to 50 ns per
division along with delayed-sweep features. A X10 magnifier
circuit extends the maximum sweep speed to 5 ns per division
when the A and B SEC/DIV switch is set to 0.05 per division.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Tektronix -- 2215A -- Servicehandboek
Bestandsnaam: Tektronix-1776-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 203
Grootte: 33.42 Mbytes (35047502 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-4735-00
Datum: juli 1984
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 5db93475a54ac15fce043f0e260cd7d1
Downloads: 2659 Sinds 21 december 2009
Informatie:
Tektronix-1776-Manual-Page-1-Picture
Start gratis downloaden


Tektronix -- 2215A -- Gebruikershandleiding
Bestandsnaam: Tektronix-2570-Manual-Page-1-Picture
Manueel de Type: Gebruikershandleiding
Pagina 's: 46
Grootte: 36.90 Mbytes (38692414 Bytes)
Taal: Engels
Herziening: Revised
Handleiding-ID/Number: 070-4732-00
Datum: december 1983
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 7f2f26266d5b5cf0cef3a5b7bf0c6170
Downloads: 1373 Sinds 18 juni 2011
Informatie:
Tektronix-2570-Manual-Page-1-Picture
Start gratis downloaden


Tektronix -- 2215A -- Servicehandboek
Bestandsnaam: Tektronix-8936-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 203
Grootte: 38.84 Mbytes (40729394 Bytes)
Taal: Engels
Herziening: revised
Handleiding-ID/Number: 070-4735-00
Datum: 01 juli 1984
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 4a02cf3d1ad6e050d923201c743ed599
Downloads: 53 Sinds 23 april 2017
Informatie:
LIST OF ILLUSTRATIONS
........................................iii

LIST OF TABLES
......................................................iii

OPERATORS SAFETY SUMMARY ..........................iv

SERVICING SAFETY SUMMARY..............................v

SECTION 1 SPECIFICATION

INTRODUCTION ................................1-1

ACCESSORIES..................................1-1

PERFORMANCE CONDITIONS ________1-1

SECTION 2 OPERATING INSTRUCTIONS

PREPARATION FOR USE ................2-1

SAFETY ........................................2-1

LINE VOLTAGE ............................2-1

POWER CORD ..............................2-1

LINE FUSE ....................................2-1

INSTRUMENT COOLING..............2-2

CONTROLS, CONNECTORS, AND

INDICATORS......................................2-2

POWER, DISPLAY, AND PROBE

ADJUST ........................................2-2

VERTICAL ....................................2-3

HORIZONTAL................................2-4

TRIGGER ......................................2-5

REAR PANEL ................................2-7

OPERATING CONSIDERATIONS ...	2-8

GRATICULE ..................................2-8

GROUNDING ................................2-8

SIGNAL CONNECTIONS ..............2-8

INPUT COUPLING CAPACITOR

PRECHARGING ............................2-8

OPERATOR'S ADJUSTMENTS ________2-9

INTRODUCTION ..........................2-9

BASELINE TRACE........................2-9

TRACE ROTATION........................2-9

PROBE COMPENSATION ............2-10

SECTION 3 THEORY OF OPERATION

INTRODUCTION ................................3-1

SECTION ORGANIZATION ..........3-1

INTEGRATED CIRCUIT DESCRIPTIONS
............................................3-1

GENERAL DESCRIPTION ................3-2

DETAILED CIRCUIT DESCRIPTION	3-3

VERTICAL ATTENUATORS..........3-3

VERTICAL PREAMPLIFIERS ...	3-4
SECTION 3 THEORY OF OPERATION (cont)

CHANNEL SWITCH AND

VERTICAL OUTPUT .......... 3-5

TRIGGER AMPLIFIERS AND

SWITCHING ................. 3-7

A TRIGGER GENERATOR............3-8

A SWEEP GENERATOR AND

LOGIC............................................3-9

ALTERNATE B SWEEP ................3-11

HORIZONTAL ................................3-13

Z-AXIS AMPLIFIER ......................3-14

POWER SUPPLY AND PROBE

ADJUST ........................................3-16

SECTION 4 PERFORMANCE CHECK PROCEDURE

INTRODUCTION ................................4-1

PURPOSE ..................................4-1

STRUCTURE ................................4-1

TEST EQUIPMENT ......................4-1

LIMITS AND TOLERANCES ....	4-1

PREPARATION FOR CHECKS ..	4-2 INDEX TO PERFORMANCE

CHECK STEPS ............................4-3

VERTICAL ....................................4-4

HORIZONTAL................................4-7

TRIGGER ......................................4-11

EXTERNAL Z-AXIS AND PROBE

ADJUST ........................................4-14

SECTION 5 ADJUSTMENT PROCEDURE

INTRODUCTION ................................5-1

PURPOSE ....................................5-1

STRUCTURE ................................5-1

TEST EQUIPMENT ......................5-1

LIMITS AND TOLERANCES ....	5-1

ADJUSTMENT INTERACTION ..	5-1 PREPARATION FOR

ADJUSTMENT ..............................5-1

INDEX TO ADJUSTMENT

PROCEDURE STEPS ..................5-3

POWER SUPPLY AND CRT DISPLAY	5-4

VERTICAL..........................................5-6

HORIZONTAL ....................................5-13

TRIGGER ..........................................5-19

EXTERNAL Z-AXIS AND PROBE

ADJUST ............................................5-23
MAINTENANCE
STATIC-SENSITIVE COMPONENTS
PREVENTIVE MAINTENANCE
INTRODUCTION .............
GENERAL CARE .............
INSPECTION AND CLEANING . .
LUBRICATION ...............
SEMICONDUCTOR CHECKS . . .
PERIODIC READJUSTMENT .. .
TROUBLESHOOTING............
INTRODUCTION .............
TROUBLESHOOTING AIDS
TROUBLESHOOTING
EQUIPMENT ................
TROUBLESHOOTING
TECHNIQUES ...............
CORRECTIVE MAINTENANCE
INTRODUCTION .............
MAINTENANCE PRECAUTIONS .
OBTAINING REPLACEMENT
PARTS .....................
MAINTENANCE AIDS .........
MAINTENANCE (cont)
INTERCONNECTIONS .........
TRANSISTORS AND
INTEGRATED CIRCUITS .......
SOLDERING TECHNIQUES ....
REMOVAL AND REPLACEMENT
INSTRUCTIONS ..............
REPACKAGING FOR SHIPMENT
SELECTABLE COMPONENTS ..

OPTIONS

REPLACEABLE ELECTRICAL PARTS

DIAGRAMS

REPLACEABLE MECHANICAL PARTS

Accessories
Tektronix-8936-Manual-Page-1-Picture
Start gratis downloaden


Commentaar

Nog geen berichten.

Commentaar Toevoegen

* Verplichte informatie
(wordt niet getoond)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Is ice cream hot or cold?
 
Voer antwoord in:
 
Meld me over nieuwe berichten via email.
 
Onthoud mijn gegevens op deze computer.
 
 
Aangedreven door Commentics