Apparatuur informatie

Fluke 8050A Digitale multimeter
Fabrikant:
Fluke
Model: 8050A
Datum: 1979
Categorie: Meetinstrumenten
Groep: Digitale multimeter
Beschrijving: portable bench- type digital multimeter
Informatie:
                                    1-2. Your John Fluke Model 8050A is a portable bench-
type digital multimeter (DMM) with a 4-1 /2 digit liquid
crystal display (LCD). The 8050A has all the following
industry-standard features:
» Voltage measurements from 10 μ to 1000V dcand 10 mV to
750V true-rms ac.
• Current measurements from 10 nA to 2A dc and 10 μΑ to 2A
true-rms ac.
® Resistance measurements from 10 mH to 20ΜΏ.
The 8050A also has several special measurement features.
These special features include the following:
• Conductance measurements up to 100,000 Mil.
• Voltage measurements in decibels, that can be referenced
to 1 of 16 user selected reference impedances.
® Resistance ranges that supply enough voltage to turn on a
PN junction to allow diodes and transistors to be tested.
• The ability to store any input signal as an offset or
relative reference value.
• Automatic polarity indication and overrange indication.
• Protection from overloads and protection from transients
of up to 6 kV, 10 microseconds.
• Dual-slope integration a/d conversion to ensure noise-free
measurements.
• Long term calibration stability (1 year).
1-3. The 8050A is warranted for a period of one year upon
shipment of the instrument to the original purchaser.
Conditions of the warranty are given at the front of this
manual. The 8050A is typically powered from ac line voltages
but may be powered by the optional rechargeable battery.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Fluke -- 8050A -- Gebruikershandleiding, Schema
Bestandsnaam: Fluke-1437-Manual-Page-1-Picture
Manueel de Type: Gebruikershandleiding, Schema
Pagina 's: 97
Grootte: 2.95 Mbytes (3088117 Bytes)
Taal: Engels
Herziening: 2 7/84
Handleiding-ID/Number: 530907
Datum: oktober 1979
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 8c0a3ade3a5172d52d90ef6687562db8
Downloads: 2372 Sinds 19 februari 2009
Informatie:
Fluke-1437-Manual-Page-1-Picture
Start gratis downloaden


Fluke -- 8050A -- Service-en gebruikershandleiding
Bestandsnaam: Fluke-7619-Manual-Page-1-Picture
Manueel de Type: Service-en gebruikershandleiding
Pagina 's: 104
Grootte: 8.51 Mbytes (8920364 Bytes)
Taal: Engels
Herziening: 2
Handleiding-ID/Number: 530907
Datum: juli 1984
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 9046d8988f512b66553942430b1b1d33
Downloads: 159 Sinds 27 januari 2016
Informatie:
1 INTRODUCTION AND SPECIFICATIONS 1-1
1-1. INTRODUCTION 1-1
1-4. OPTIONS AND ACCESSORIES 1-1
1-5. SPECIFICATIONS
...................................................................................
1-1
2 OPERATION
...........................................................................................................
2-1
2-1. INTRODUCTION
.....................................................................................
2-1
2-3. SETTING UP YOUR INSTRUMENT .................... 2-1
2-4. Unpacking
...............................................................................................
2-1
2-8. AC Line Voltage Requirements 2-1
2-10. Fuse Replacement 2-1
2-13. FRONT PANEL FEATURES 2-2
2-15. Display 2-2
2-18. SIGNAL INPUT LIMITS 2-2
2-20. OPERATING TECHNIQUES 2-3
2-22. AC/DC Voltage (V) 2-3
2-24. AC/ DC Current (mA) 2-3
2-26. Resistance (Ω) 2-7
2-28. Conductance (S = 1Ω) 2-7
2-30. Diode Test 2-7
2-32. Relative (RELATIVE) 2-7
2-36. Decibel (dB) 2-11
2-38. INITIAL CHECKOUT PROCEDURE .................... 2-12
2-41. APPLICATIONS 2-12
2-43. DC Voltage Measurement 2-12
2-51. Current Measurement 2-13
2-56. Resistance Measurement 2-13
2-62. Conductance Measurement 2-14
2-80. Relative Measurement 2-16
2-84. AC Voltage and Current
Measurement................................................ 2-16
3 THEORY OF
OPERATION...................................................................................
3-1
3-1. INTRODUCTION
.....................................................................................
3-1
3-3. FUNCTIONAL DESCRIPTION 3-1
TITLE PAGE
3-7. A/D Converter
.........................................................................................3-1
3-18. Microcomputer
.........................................................................................3-2
3-20. Signal Conditioning
.................................................................................3-6
3-31. True-RMS
Converter...............................................................................3-8
3-38. Touch-Hold Circuit
.................................................................................3-8
3-40. Voltage Protection
...................................................................................3-8
3-43. Current Protection
..................................................................................3-8
4 MAINTENANCE
...........................................................................................
4-1
4-1. INTRODUCTION
.....................................................................................
4-1
4-4. SERVICE INFORMATION
...................................................................
4-1
4-7. GENERAL INFORMATION
..................................................................
4-1
4-9. Interior
Access.........................................................................................
4-1
4-24. dB Reference Impedance Power-Up
Setting........................................ 4-4
4-26. Cleaning
...................................................................................................
4-5
4-28. PERFORMANCE TESTS
.......................................................................
4-5
4-30. Initial Procedures
...................................................................................
4-5
4-32. Display
Test.............................................................................................
4-5
4-34. Linear Voltage Test
...............................................................................
4-6
4-36. dB Voltage
Test.......................................................................................
4-6
4-38. Current
Test.............................................................................................
4-7
4-40. Resistance and Conductance
Tests........................................................ 4-7
4-42. CALIBRATION ADJUSTMENTS
........................................................ 4-8
4-44. DC Calibration
.......................................................................................
4-8
4-46. AC Calibration
.......................................................................................
4-8
4-48. Jumper
Selection.....................................................................................
4-8
4-57. TROUBLESHOOTING
...........................................................................
4-12
5 LIST OF REPLACEABLE PARTS
...............................................................
5-1
TABLE OF CONTENTS
.........................................................................
5-1
5-1. INTRODUCTION
.....................................................................................
5-2
5-3. PARTS ORDERING INFORMATION
................................................ 5-2
6 OPTIONS AND ACCESSORIES
.................................................................
6-1
TABLE OF CONTENTS
.........................................................................
6-1
INTRODUCTION
.....................................................................................
6-2
ACCESSORIES
.........................................................................................
600-1
OPTIONS
...................................................................................................
601-1
7 SCHEMATIC DIAGRAMS
...........................................................................
7-1
TABLE OF CONTENTS
.........................................................................
7-1
APPENDIX A
.................................................................................................
A-1
Fluke-7619-Manual-Page-1-Picture
Start gratis downloaden


Fluke -- 8050A -- Service-en gebruikershandleiding
Bestandsnaam: Fluke-7727-Manual-Page-1-Picture
Manueel de Type: Service-en gebruikershandleiding
Pagina 's: 106
Grootte: 5.11 Mbytes (5360134 Bytes)
Taal: Engels
Herziening: 2
Handleiding-ID/Number: 530907
Datum: juli 1984
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 645b1f5f0f6c33dddc5fe37e20c5466f
Downloads: 175 Sinds 13 februari 2016
Informatie:
1
2
TITLE PAGE
INTRODUCTION AND SPECIFICATIONS
.................................................. 1-1
l-l. INTRODUCTION .
I-4. OPTIONS AND ACCESi
I-5. SPECIFICATIONS
......................................................................
1-1
SORIES..........................................................
1-1
......................................................................
1-1
OPERATION
..............................................................................................................
2-1
2-1. INTRODUCTION
.........................................................................................
2-1
2-3. SETTING UP YOUR INSTRUMENT
.................................................... 2-1
2-4. Unpacking
..................................................................................................
2-1
2-8. AC Line Voltage Requirements
..............................................................
2-1
2-10. Fuse
Replacement.......................................................................................
2-1
2-13. FRONT PANEL
FEATURES....................................................................
2-2
2-15. Display
..........................................................................................................
2-2
2-18. SIGNAL INPUT LIMITS
...........................................................................
2-2
2-20. OPERATING
TECHNIQUES....................................................................
2-3
2-22. AC/DC Voltage (V)
...................................................................................
2-3
2-24. AC/DC Current (mA)
.............................................................................
2-3
2-26. Resistance (Ω)
.............................................................................................
2-7
2-28. Conductance (S =
IΩ)...............................................................................
2-7
2-30. Diode Test
...................................................................................................
2-7
2-32. Relative (RELATIVE)
...............................................................................
2-7
2-36. Decibel
(dB).................................................................................................
2-11
2-38. INITIAL CHECKOUT PROCEDURE
.................................................... 2-12
2-41. APPLICATIONS
...........................................................................................
2-12
2-43. DC Voltage Measurement
...........................................,..........................
2-12
2-51. Current Measurement
...............................................................................
2-13
2-56. Resistance Measurement
.........................................................................
2-13
2-62. Conductance Measurement
......................................................................
2-14
2-80. Relative Measurement
...............................................................................
2-16
2-84. AC Voltage and Current
Measurement.................................................. 2-16
THEORY OF
OPERATION.......................................................................................
3-1
3-1. INTRODUCTION
.........................................................................................
3-1
3-3. FUNCTIONAL DESCRIPTION
............................................................. 3-1
3-5. CIRCUIT
DESCRIPTION...........................................................................
3-1
TITLE PAGE
3-7. A/D Converter
.............................................................................................3-1
3-18. Microcomputer
..............................................................................................3-2
3-20. Signal Conditioning
.....................................................................................3-6
3-31. True-RMS Converter
..................................................................................3-8
3-38. Touch-Hold Circuit
.....................................................................................3-8
3-40, Voltage Protection
.......................................................................................3-8
3-43. Current Protection
..................................................................................3-8
4 MAINTENANCE
...............................................................................................
4-1
4-1. INTRODUCTION
.........................................................................................
4-1
4-4. SERVICE INFORMATION
.......................................................................
4-1
4-7. GENERAL INFORMATION
....................................................................
4-1
4-9. Interior
Access.............................................................................................
4-1
4-24. dB Reference Impedance Power-Up
Setting......................................... 4-4
4-26. Cleaning
.......................................................................................................
4-5
4-28. PERFORMANCE TESTS
..........................................................................
4-5
4-30. Initial Procedures
.......................................................................................
4-5
4-32. Display
Test.............................................................................................
4-5
4-34. Linear Voltage Test
.............................*...................................................
4-6
4-36. dB Voltage
Test..........................................................................................
4-6
4-38. Current
Test.................................................................................................
4-7
4-40. Resistance and Conductance Tests
.......................................................... 4-7
4-42. CALIBRATION ADJUSTMENTS
.......................................................... 4-8
4-44. DC Calibration .....................................
................................................. 4-8
4-46. AC Calibration .....................................
.................................................. 4-8
4-48. Jumper
Selection.........................................................................................
4-8
4-57. TROUBLESHOOTING
...............................................................................
4-12
5 LIST OF REPLACEABLE PARTS
.................................................................
5-1
TABLE OF CONTENTS
.............................................................................
5-1
5-1. INTRODUCTION
........................................................................................
5-2
5-3. PARTS ORDERING INFORMATION
.................................................. 5-2
6 OPTIONS AND ACCESSORIES
...................................................................
6-1
TABLE OF CONTENTS
.............................................................................
6-1
INTRODUCTION
.........................................................................................
6-2
ACCESSORIES
.............................................................................................
600-1
OPTIONS
.......................................................................................................
601-1
7 SCHEMATIC DIAGRAMS
..............................................................................
7-1
TABLE OF CONTENTS
............................................................................
7-1
APPENDIX A
.....................................................................................................
A-1
Fluke-7727-Manual-Page-1-Picture
Start gratis downloaden


Commentaar (1)

Je dient een beoordeling: Fluke 8050A
Sort
0/5 (0)
Facebookdel.icio.usStumbleUponDiggTechnoratiGoogle+RedditMySpaceTwitterLinkedIn
Gravatar
MALDJIAN schreef...
Hello,
Please send me the spécifications and instruction manuel of DIGITAL MULTIMETER 8050A, in french langage.
Thanck you very much
.
26 December 2014 12.50
Pagina 1 van 1

Commentaar Toevoegen

* Verplichte informatie
(wordt niet getoond)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the word table backwards.
 
Voer antwoord in:
 
Meld me over nieuwe berichten via email.
 
Onthoud mijn gegevens op deze computer.
 
 
Aangedreven door Commentics