Apparatuur informatie

Philips Medical Systems Avalon CTS M2726A Monitoringssysteem
Philips Medical Systems
Model: Avalon CTS M2726A
Datum: 2004
Categorie: Medische en biomedische apparatuur
Groep: Monitoringssysteem
Beschrijving: Cordless Fetal Transducer System
                                    When connected to a compatible fetal monitor, the Avalon CTS
Cordless Fetal Transducer System (M2720A) lets you perform
continuous, cordless patient monitoring in the antepartum
period and during labor and delivery.
You can continuously monitor the fetal heart rate (FHR)
non-invasively using ultrasound, or invasively by direct
electrocardiogram (DECG), and the uterine activity using an
external Toco transducer. The fetal parameters are measured
and transmitted continuously via radio frequency from the
transducer to the base station, eliminating the need for
patient cables. The fetal monitor, connected to
the base station, displays and records the parameters.
All the transducers are watertight. You can continuously
monitor patients in a bath or shower using the
Toco (M2725A) and the Ultrasound (M2726A) transducers.
The system should only be used by, or under the direct
supervision of, a licensed physician or other
health care practitioner who is trained in the use of FHR
monitors and in the interpretation of FHR traces.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Manueel de Type: Servicehandboek PhilipsMedical-10658-Manual-Page-1-Picture
Pagina 's: 107
Grootte: 11.87 Mbytes (12449111 Bytes)
Taal: Engels
Handleiding-ID/Number: M2720-9000C and/or 4512 610 04681
Datum: 01 oktober 2004
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: bd843b9718fe006f77e6bb320d16d86a
Downloads: 34 Sinds 31 maart 2018
This guide tells you how to service and repair the base
station (M2720A) and transducers (M2725A, M2726A, and
M2727A) of the Avalon CTS Cordless Fetal Transducer System.
It describes the system hardware and software, tells you how
to diagnose operating and servicing problems, and how to
test the system.
As this system is intended to be installed by the customer,
refer to the Instructions for Use for details of how to
install the system. See also “Pre-Installation 
considerations” on page 2.
The Avalon CTS Cordless Fetal Monitoring System Service
Guide supplements the maintenance and troubleshooting
procedures, carried out by the operator, that are described
in the Instructions for Use. Refer to the Instructions for
Use for maintenance and troubleshooting procedures that may
be performed during normal operation.
Only qualified service personnel should attempt to install
the system, disassemble the base station, remove or replace
any internal assemblies, or replace the transducer batteries
or belt buttons.


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics