Apparatuur informatie

ARP Instruments Inc. Odyssey 2813 Synthesizer
Fabrikant:
ARP Instruments Inc.
Model: Odyssey 2813
Datum: 1978
Categorie: Proffesionele muziekinstallatie
Groep: Synthesizer
Beschrijving:
Informatie:
                                    Three types of Odyssey models have been produced: I) 2800,
2) 2810-2815 and 3) 2820-2823. The model and serial number
are located at the rear or bottom of the Odyssey chassis.
Except for 2800, a typical number might read: 2813-0490. For
model 2800, the first two digits of the serial number denote
the model, such as: 28490. Listed below are the board
identification numbers for each model; they will be
referenced in the service manual by model number for easy
identification.

Model Changes
The Odyssey has undergone major cosmetic and electrical
changes since its original production in 1972, however, the
functional capabilities have remained virtually unchanged.
The following are the most noticeable physical differences
among models:

MODEL 2800
Black and white face panel (some later models have black and
gold face panels).

Pitch Bend knob

No Factory installed interface jacks.

Wrap around vinyl bottom cover.

MODEL 2810-2813

Black and gold face panel.

New style power switch.

Factory installed interface jacks*

Pitch Bend knob. (Some later models have PPC.)

Wrap around vinyl bottom cover.

MODEL 2820-2823 (current model, Odyssey '78)

Black and orange face panel.

Steel chassis Leather endblocks -

PPC

The major electrical changes found in the Odyssey-II as
compared to the Odyssey-I are:
1.	Uses 24db/octave filter in place of 12db/? octave.
2.	Improved VCO design for better tracking# and stability.
3.	Improved power supply regulation.
4.	Improved keyboard current source for CV generation.
5.	Improved S/H memory circuit design.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

ARP Instruments Inc. -- Odyssey 2813 -- Servicehandboek
Bestandsnaam: ARP-9678-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 44
Grootte: 11.54 Mbytes (12101282 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum: 01 januari 1978
Kwaliteit: Gescande document, lezen deels slecht, deels niet leesbaar.
Uploaden datum:
MD5: 4d0d54d49eb787036dcab9aabff8b04d
Downloads: 11 Sinds 15 oktober 2017
Informatie:
This service manual is divided into three major sections: A)
Circuit Descriptions, B) Trim Procedures, and C) Board Test
Points. The circuit descriptions should be consulted when a
problem is suspected in a particular area of the instrument.
The trim procedures should be used to verify calibrations or
when a component has been changed. The board test points are
a quick reference to verify circuits with suspected problems
and should be checked whenever a problem has been identified.
ARP-9678-Manual-Page-1-Picture
Start gratis downloaden


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
What is the next number: 10, 12, 14, ..?
Powered by Commentics