Apparatuur informatie

Cornell Dubilier Electronics AR-22-220 Antenne
Fabrikant:
Cornell Dubilier Electronics
Model: AR-22-220
Datum:
Categorie: Radio, Communicatie
Groep: Antenne
Beschrijving: CDR Rotor
Informatie:
                                    The control unit was designed with one knob control for easy
and simple operation. A 360° rotation of the knob on the
control unit corresponds to a complete rotation (360°) of
the antenna.

The end of rotation on the knob corresponds to the end of
rotation on the Rotor. The knob will rotate 360° between
ends of rotation and can be set in any of the 60 positions
on the control unit dial, each representing 6° rotation of
the antenna.

When turning the knob thru an angle greater than 330° allow
the unit to pulse a few times before completing the turn. Do
not force the knob when the end of rotation is reached.

(A)	IMPORTANT — IF LIGHTS REMAIN ON AFTER PULSING HAS
STOPPED it indicates [with the exception noted in (B)] that
the rotor and control box are not synchronized with each
other and the motor is stalled. Do not allow this condition
to continue because the temperature of the motor is rising
unnecessarily. Correct this condition by synchronizing per
instructions on Page 4 or on the underside of the control box.

(B)	IMPORTANT — IF PULSING SOUND IS NOT EVIDENT WHEN YOU
TURN THE KNOB, either to the right or to the left, it
indicates that the thermoswitch has come into play. This
protective device automatically shuts off the power to the
rotor unit when the rotator has been operated continuously
for too long a period of time (usually 10 to 15 minutes) or
when the rotor and control box have been allowed to remain
out of synchronization with each other with the power on as
mentioned above. To REMEDY, line the knob up with the red
pointer and allow the rotator to rest until the temperature
drops. This will take about 5 minutes. The thermoswitch will
then close and the rotator will again be operative.

To service any part of the automatic control unit, first
take off the rubber bumpers and remove cabinet from chassis.
(See Fig. D). Check for obvious defects such as loose solder
connections, burned out transformer, pitted contacts, etc.
associated with the A.C. power source.

Check for your difficulty by using the trouble-shooting
chart included in this Manual. In the exploded views of the
control unit (Fig. E) and the rotor unit (Fig. 5) the
individual parts and their part numbers are shown. Use this
reference to order parts by the proper part number.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Cornell Dubilier Electronics -- AR-22-220 -- Servicehandboek
Bestandsnaam: CDE-9122-Manual-Page-1-Picture
Manueel de Type: Servicehandboek
Pagina 's: 12
Grootte: 565.82 Kbytes (579400 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum:
Kwaliteit: Gescande document, lezen deels slecht, deels niet leesbaar.
Uploaden datum:
MD5: 0f9265bf1253c40d454745a93fec3060
Downloads: 28 Sinds 01 augustus 2017
Informatie:
CDE-9122-Manual-Page-1-Picture
Start gratis downloaden


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics