Equipment information
Icom IC-M600 Transceiver
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Icom IC-M600 you can upload the files here .
Model:
IC-M600
Date:
1991
Category:
Group:
Description:
VHF MARINE TRANSCEIVER
Information
• One-touch emergency frequency access capability.
• Full 150 W* (PEP) of output power.
• Excellent frequency stability of ±20 Hz in the -30°C ~ +
60°C range.
• DDS (Direct Digital Synthesizer) system for a rapid lockup
time and high quality frequency oscillation.
• Convenient frequency selection via keyboard entry or
rotation of the main dial.
• Clarity control for up to ±150 Hz in 10 Hz steps.
• 99 user-programmable memory channels.
• 192 pre-programmed ITU channels and 282 new ITU channels
effective July 1991.
• Overload protection against open, shorted or mismatched
Antenna connections and thermal overloads.
• General coverage Receiver.
• Splash-resistant front panel.
• Keyboard and function display backlighting.
• Audio activated squelch.
• Noise blanker circuit.
• AGC (Automatic Gain Control) circuit.
•Accepts an optional AT-120 HF AUTOMATIC Antenna Tuner.
•Optional UT-62 ALARM UNIT for alarm signal transmission.
* For 25.0000~26.9999 MHz: More than 60 VV
Manual Type:
User Manual
Pages:
28
Size:
2.66 Mbytes (2788182 Bytes)
Language:
english
Revision:
Manual-ID:
A-5168H-1US
Date:
Quality:
Scanned document, all readable.
Upload date:
2016 01 09
MD5:
9d03e9839cf2cec009e97e8c38ace835
Downloads:
743
Information
FOREWORD ...
EXPLICIT DEFINITIONS ...
IMPORTANT SAFETY PRECAUTIONS
FEATURES ...
TABLE OF CONTENTS ... ii
UNPACKING ... ii
1 PANEL DESCRIPTION ... 1-4
- Switches and
controls ... 1—2
- Rear
panel ... 3
- Function
display ... 4
2 INSTALLATION ... 5-8
- Mounting the
transceiver ... 5
- Rear panel
connections ... 6
- Installation
example ... 7
- Ground
connections ... 8
- Antenna
connections ... 8
- Power
source ... 8
3 EXTERNAL EQUIPMENT
CONNECTIONS ... 9-10
- AT-120 HF AUTOMATIC Antenna Tuner ... 9
- Internal setting for a non-lcom Antenna
tuner ... 9
- MN-100, MN-100L Antenna MATCHERS ... 10
- OPC-302, OPC-303 ACC CABLES ... 10
4 SELECTING A CHANNEL ... 11-12
- Direct selection of 2182 kHz ... 11
- Selecting a memory channel ... 11—12
5 SETTING A FREQUENCY ... 13
- Setting a
frequency ... 13
- Changing the frequency in 100 Hz steps ... 13
6 OPERATING RULES AND GUIDELINES . . . 14
7
RECEIVING ... 15-16
-
Receiving ...
15—16
8
TRANSMITTING ...
17
-
Transmitting ...
17
- Setting the transmit power ... 17
9 MEMORY OPERATION ... 18
- Programming a frequency ... 18
- Changing the operating mode ... 18
- Clearing memory information ... 18
10 ALARM SIGNAL (OPTIONAL) ... 19
- Transmitting an alarm signal on 2182 kHz___19
- Distress call
procedures ... 19
- Testing an alarm
signal ... 19
11 OPTIONAL UNIT INSTALLATION ... 20
- UT-62 ALARM
UNIT ... 20
- ACC
cables ... 20
12
MAINTENANCE ... 21
- Replacing a
fuse ... 21
-
Cleaning ... 21
13 TROUBLESHOOTING ... 22
14
SPECIFICATIONS ... 23
15
OPTIONS ... 24