Equipment information

Wavetek 111 Generator
Manufacturer:
Model:
111
Date:
1966
Category:
Group:
Description:
Voltage controlled generator

Information

The Wavetek model 110 Function Generator and Model 111 Voltage Controlled Generator (VCG) are semi-precision sources of waveforms from servo to video frequencies. These units are extremely rugged, completely transistorized portable packages. They feature complete Plug-In printed circuit board construction with interchangeable individually calibrated printed circuit boards utilizing silicon semiconductors throughout. The extremely clean and stable waveform signal from 0. 005 Hz to 1 MHz (model 110) and 0.0015 Hz to 1 MHz (model 111) make these generators highly versatile general purpose pieces of equipment for the laboratory or the field. The Models 110 and 111 are identical in size and performance except that the model 111 offers VCG and the additional ramp function. Both Models feature a main output with function selector switch and amplitude attenuator. In addition, they offer simultaneous 5 volt peak to peak 50.n. outputs of sine, square and triangle waveforms; 1 volt, 10 nsec. rise and fall time square wave; and, -10 volt sync pulse. Frequency is controlled by an eight position range switch at 20:1 range, thus providing good overlap. All outputs may be shorted simultaneously and the Generator will continue to oscillate internally with less than 0. 5% change in frequency. Voltage may be applied back into the Generator so long as this voltage does not exceed the maximum output voltage. Up to ±50 volts may be applied to the VCG input without damage.

show more

Service and User Manual
Manual Type:
Service and User Manual
Pages:
82
Size:
6.32 Mbytes (6621774 Bytes)
Language:
english
Revision:
1-67
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2011 01 05
MD5:
099375011a666ac9020c8e5042a0ebea
Downloads:
2393
Service and User Manual
Manual Type:
Service and User Manual
Pages:
82
Size:
6.30 Mbytes (6602541 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2014 11 09
MD5:
0ff61e38f3a8f295bfbc8be6f862b3a3
Downloads:
2198

Information

SECTION 1 SPECIFICATIONS SECTION 2 INSIDE VIEWS SECTION 3 DISASSEMBLY INSTRUCTION SECTION 4 OPTIONAL UNIT INSTALLATION SECTION 5 CIRCUIT DESCRIPITON 5-1 Receiver CIRCUITS ... 5-1 5-2 Transmitter CIRCUITS ... 5-1 5-3 OTHER CIRCUITS ... 5-2 5-4 CPU (M: IC20) PORT ALLOCATION ... 5-3 SECTION 6 ADJUSTMENT PROCEDURES 6-1 PREPARATION ... 6-1 6-2 FREQUENCY ADJUSTMENT ... 6-6 6-3 TRANSMIT ADJUSTMENT ... 6-7 6-4 RECEIVE ADJUSTMENT ... 6-8 SECTION 7 PARTS LIST SECTION 8 MECHANICAL PARTS SECTION 9 BOARD LAYOUTS SECTION 10 BLOCK DIAGRAM SECTION 11 VOLTAGE DIAGRAM FRONT UNIT ... 11-1 MAIN UNIT (1/3) ... 11-2 MAIN UNIT (2/3) ... 11-3 MAIN UNIT (3/3) ... 11-4 CONNECT UNIT ... 11-5

show more