Equipment information

Anritsu MS2601A Spectrum analyzer
Manufacturer:
Model:
MS2601A
Date:
1988
Category:
Group:
Description:

Information

The MS2601A/J Spectrum Analyzer has a wide bandwidth from 9 kHz to 2.2 GHz which includes the video band. The RF input impedance is 50 Ω for the MS2601A and 75 Ω for the MS2601J. A synthesized system is used for the local signal. Also, since an automatic calibration function is built in, measurement error is reduced to 1/3 of conventional Anritsu spectrum analyzers and very accurate measurements are possible. The MS2601A/J operability is furthered by use of a zone marker, a zone marker sweep, a frequency axis scroll, a unique new counting method, and a PMC (Plug-in Memory Card) which simplifies the measurement. Moreover, since PTA (Personal Test Automation) can be built in, a high-speed automatic measuring system can be configured easily. Therefore, the MS2601A/J is very suited to productions line for various components and electronic devices. The MS2601A/J has also a quasi peak (QP) detector to measure the EMI from data processing equipment. ■ Applications The MS2601A/J can be used for development, adjustment, inspection, and maintenance of electronic components and devices in: AM, FM mobile radio equipment MCA, personal radio equipment Satellite broadcasting, TV equipment (tuners, converters, etc.) Data processing equipment such as personal computers for EMI (Electro-Magnetic Interference) measurement

show more

Service Manual
Manual Type:
Service Manual
Pages:
424
Size:
4.25 Mbytes (4457249 Bytes)
Language:
english
Revision:
1
Manual-ID:
100 N-9
Date:
Quality:
Scanned document, all readable.
Upload date:
2014 05 02
MD5:
4e4c63ebe0ccab4b59a831ac4a22d034
Downloads:
1767

Information

This manual describes how to troubleshoot and adjust the MS2601A/J Spectrum Analyzer. It is composed of the following sections. SECTION 2 MECHANICAL CONFIGURATION This section describes the mechanical parts and how to disassemble each unit (PCB etc.) SECTION 3 TROUBLESHOOTING AND ADJUSTMENT This section describes the operation of each circuit, troubleshooting procedures, and adjustment procedures. SECTION 4 CALIBRATION OF COMPENSATION DATA This section describes how to enter the compensation data for internal characteristics after repair. SECTION 5 REPLACEABLE PARTS This section includes the parts list and describes how to order replaceable parts.

show more

User Manual
Manual Type:
User Manual
Pages:
598
Size:
6.80 Mbytes (7129384 Bytes)
Language:
english
Revision:
1
Manual-ID:
100N-14
Date:
Quality:
Scanned document, all readable.
Upload date:
2014 05 02
MD5:
61a65c418e3e86e5d031836bd23a0123
Downloads:
1608

Information

This operation manual consists of 12 sections and appendixes outlined below: Composition Use SECTION SECTION SECTION SECTION 1 2 3 4 GENERAL PREPARATION STARTING OPERATION AND SIMPLE PERFORMANCE CHECKS CALIBRATION AND PERFORMANCE TESTS . SECTIONS 1 to 4 describe how prepare and evaluate the MS2601A/J (simple checks or performance tests). . SECTIONS 1 to 3 also give background information for general operation of the MS2601A/J. SECTION 5 OPERATION . SECTION 5 is a detailed description of the front and rear panel controls SECTION 6 MEASUREMENT shown in APPENDIX P. Beginners should read this section SECTION 7 PRINCIPLES OF OPERATION after reading SECTION 3. . SECTION 6 explains the typical measurement procedure. . SECTION 7 explains the MS2601A/J block diagram. SECTION 8 GP-IB GENERAL . These sections explain the GP-IB programming for configuring an auto- SECTION 9 GP-IB ADDRESSES matic measurement system by combining the MS2601A/J with a personal SECTION 10 GENERAL FORMAT OF GP-IB DEVICE MESSAGE computer and other measuring instruments. SECTION 11 DETAILS OF GP-IB DEVICE MESSAGE SECTION 12 PROGRAMMING APPENDIX A to P Data for operation manual Q Front and rear panel controls explanation The MS2601A/J front and rear panel drawings and explanation are attached as a foldout at the end of this operation manual.

show more