Equipment information

Thurlby Thandar Instruments TTI TG300 Series Generator
Manufacturer:
Model:
TG300 Series
Date:
2009
Category:
Group:
Description:
3MHz Function Generators

Information

The TG300 series are precision 3MHz function generators with waveforms of sine, triangle, ramp. pulse and DC from a variable amplitude 50Ω or 600Ω output. A TTL/CMOS auxiliary output is also provided. The frequency range is 0·03Hz to 3MHz selected by a seven decade range multiplier and calibrated vernier. Both the frequency vernier and the sweep input can give 1000:1 frequency change within a selected range. A 10:1 symmetry range permits ramp and pulse waveforms to be produced. The Generator output level is 20Vpk-pk maximum from a 50/600Ω source. The level is set via a switched attenuator plus vernier with a total range of >80dB. DC offset is vernier adjustable over a ±10V range with centre detent for 0V. Waveform quality is good at all frequencies and signal levels. All models feature a large liquid crystal display shows frequency and amplitude simultaneously. Good resolution and a fast display update rate are maintained at all frequencies. The TG330 also has internal LIN/LOG sweep with sweep output and AM. Amplitude modulation of up to 100% is possible using the internal 400Hz Oscillator or an external source. On the TG320 and TG330 the display can also be used as an external 120MHz frequency meter with up to 7-digit resolution. Additional display annunciators indicate Generator status when sweep, AM, etc. are in use. 2

show more

User Manual
Manual Type:
User Manual
Pages:
43
Size:
823.39 Kbytes (843150 Bytes)
Language:
english
Revision:
Issue 6
Manual-ID:
48591-0820
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 11 02
MD5:
da2adce8df0fb0ab6441aa7ecffd16a5
Downloads:
524

Information

Introduction 2 Specification 3 EMC 7 Safety 8 Installation 9 Operation 10 Calibration and Maintenance 13 Instructions en Francais Sécurité 14 Installation 15 Fonctionnement 16 Calibrage et maintenance 20 Bedienungsanleitung auf Deutsch Sicherheit 21 Installation 22 Betrieb 23 Kalibrierung und Wartung 27 Istruzioni in Italiano Sicurezza 28 Installazione 29 Funzionamento 30 Calibrazione e Manutenzione 34 Instrucciones en Español Seguridad 35 Instalación 36 Funcionamiento 37 Calibrado y Mantenimiento 41

show more