Equipment information
Singer 18U322 Amplifier
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Singer 18U322 ?
If you have any other manuals for the
Singer 18U322 you can upload the files here .
Model:
18U322
Date:
Category:
Group:
Description:
Information
Machine 18U322 is a cylinder bed machine with the machine
pulley at the left hand side. It is fitted with a hollow
needle bar. The bobbin winder is attached to the table.
Machine 18U322 is designed for vamping shoes, etc., and for
stitching other varieties of work in light and medium weight
leathers.
A cloth plate which can be readily attached or detached is
furnished at an additional charge when specified on order.
Machine 18U322 has one needle and a long beak shuttle, a
roller presser and a drop feed at the left of the needle.
The cylinder bed is 2-1/2 inches in diameter and 10-1/2
indies in length from the needle to the base of the arm. It
is used for shoe work.
Manual Type:
User Manual
Pages:
10
Size:
294.85 Kbytes (301927 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2015 11 15
MD5:
797ca9b6c42d28caac38dfd396f935cb
Downloads:
774
Information
DESCRIPTION ... 1
SPEED ... 1
TO OIL THE MACHINE ... 1
NEEDLE ... 2
TO SET THE NEEDLE ... 2
THREAD ... 2
TO THREAD THE NEEDLE OF THE MACHINE ... 3
TO REMOVE THE BOBBIN FRON! THE MACHINE ... 3
TO WIND THE BOBBIN ... 4
TO THREAD THE SHUTTLE ... 5
TO REPLACE THE SHUTTLE IN THE MACHINE ... ό
TO PREPARE FOR SEWING ... 7
TO COMMENCE SEWING ... 7
TO REMOVE THE WORK ... 7
TENSIONS ... 7
TO REGULATE THE TENSIONS ... 8
TO REGULATE THE LENGTH OF STITCH ... S
TO REGULATE THE PRESSURE ON THE MATERIAL ... 8
INSTRUCTIONS FOR ADJUSTERS AND MACHINISTS
TO SET THE NEEDLE BAR AT THE CORRECT HEIGHT ... 8
TO RAISE OR LOWER THE FEED DOG ... 8