Informations de l’équipement

Fluke 199B ScopeMeter
Fabricant:
Fluke
Modèle: 199B
Date: 2002
Catégorie: Mètres
Groupe: ScopeMeter
Description:
Informations:
                                    The Fluke I92B/196B-C7199B-C ScopeMeter test tools have
three input channels that are electrically floating with
respect to each other, and with respect to the power adapter
input.
Channel A and channel B are oscilloscope channels with a
60/100/200 MHz bandwidth. The Meter/External Trigger channel
is a combined DMM and external trigger channel with a
limited (10 kHz) bandwidth.
The B versions have a black&white LCD, the C versions have a
color display.

Ces manuels sont disponibles pour les équipements ci-dessus :

Fluke -- 199B -- manuel de réparation
Nom de fichier: Fluke-6534-Manual-Page-1-Picture
Type manuel: manuel de réparation
Pages: 206
Taille: 9.71 Mbytes (10177034 Bytes)
Langue: Anglais
Révision:
Numéro d’identification: PN 4822 872 05391
Date: 2002
Qualité: Électronique de documents, numérisation sans, bien lisible.
Télécharger date:
MD5: 951de7682a2c1ae7299f9ca8aa14f216
Téléchargements: 451 depuis 29 novembre 2014
Informations:
1 Safety Instructions
.............................................................................
1-1
1.1
Introduction.................................................................................................
1-3
1.2 Safety
Precautions.......................................................................................
1-3
1.3 Caution and Warning
Statements................................................................
1-3
1.4
Symbols.......................................................................................................
1-3
1.5 Impaired Safety
...........................................................................................
1-4
1.6 General Safety
Information.........................................................................
1-4
2 Characteristics
...................................................................................
2-1
2.1
Introduction.................................................................................................
2-3
2.2 Dual Input
Oscilloscope..............................................................................
2-3
2.2.1 Isolated Inputs A and B
(Vertical).......................................................
2-3
2.2.2 Horizontal
............................................................................................
2-4
2.2.3 Trigger and Delay
................................................................................
2-4
2.2.4 Automatic Connect&View Trigger
..................................................... 2-5
2.2.5 Edge Trigger
........................................................................................
2-5
2.2.6 Isolated External Trigger
.....................................................................
2-5
2.2.7 Video
Trigger.......................................................................................
2-5
2.2.8 Pulse Width
Trigger.............................................................................
2-5
2.2.9 Continuous Auto
Set............................................................................
2-6
2.2.10 Automatic Capturing Scope Screens
................................................. 2-6
2.3 Automatic Scope
Measurements.................................................................
2-6
2.3.1
General.................................................................................................
2-6
2.3.2 DC Voltage
(VDC)..............................................................................
2-6
2.3.3 AC Voltage
(VAC)..............................................................................
2-6
2.3.4 AC+DC Voltage (True
RMS)..............................................................
2-7
2.3.5 Amperes
(AMP)...................................................................................
2-7
2.3.6
Peak......................................................................................................
2-8
2.3.7 Frequency (Hz)
....................................................................................
2-8
2.3.8 Duty Cycle (DUTY)
............................................................................
2-8
2.3.9 Pulse Width
(PULSE)..........................................................................
2-8
2.3.10 Vpwm (C versions
only)....................................................................
2-8
2.3.11 Power
.................................................................................................
2-9
2.3.12 Phase
..................................................................................................
2-9
2.3.13 Temperature (TEMP)
........................................................................
2-9
2.3.14 Decibel
(dB).......................................................................................
2-9
2.4 Meter
...........................................................................................................
2-10
2.4.1 Meter Input
..........................................................................................
2-10
2.4.2 Meter
Functions...................................................................................
2-10
2.5 DMM Measurements on Meter
Inputs........................................................
2-10
2.5.1
General.................................................................................................
2-10
2.5.2 Ohms (Ω)
.............................................................................................
2-10
2.5.3 Continuity
(CONT)..............................................................................
2-10
2.5.4
Diode....................................................................................................
2-11
2.5.5 Temperature
(TEMP)...........................................................................
2-11
2.5.6 DC Voltage
(VDC)..............................................................................
2-11
2.5.7 AC Voltage
(VAC)..............................................................................
2-11
2.5.8 AC+DC Voltage (True
RMS)..............................................................
2-11
2.5.9 Amperes
(AMP)...................................................................................
2-12
2.6 Recorder
......................................................................................................
2-12
2.6.1 TrendPlot (Meter or
Scope).................................................................
2-12
2.6.2 Scope Record
.......................................................................................
2-12
2.7 Zoom, Replay and
Cursors..........................................................................
2-13
2.7.1
Zoom....................................................................................................
2-13
2.7.2 Replay
..................................................................................................
2-13
2.7.3 Cursor Measurements
..........................................................................
2-13
2.8
Miscellaneous..............................................................................................
2-13
2.8.1
Display.................................................................................................
2-13
2.8.2 Power
............................................................................................
2-13
2.8.3 Probe
Calibration.................................................................................
2-14
2.8.4
Memory................................................................................................
2-14
2.8.5
Mechanical...........................................................................................
2-14
2.8.6 Optical Interface
Port...........................................................................
2-14
2.9 Environmental
.............................................................................................
2-14
2.10
Safety..................................................................................................
2-15
2.11 10:1 probe VPS200
...................................................................................
2-17
2.11.1 Safety
.................................................................................................
2-17
2.11.2 Electrical
specifications.....................................................................
2-17
2.11.3
Environmental....................................................................................
2-17
2.12 Electromagnetic
Immunity........................................................................
2-18
3 Circuit Description
.............................................................................
3-1
3.1
Introduction.................................................................................................
3-3
3.2 Block Diagram
............................................................................................
3-3
3.3 Start-up Sequence, Operating
Modes..........................................................
3-7
3.4 Detailed Circuit
Descriptions......................................................................
3-9
3.4.1 Scope Channel A - Scope Channel B
.................................................. 3-9
3.4.2 Meter/Ext Trigger
Channel..................................................................
3-12
3.4.3 Sampling&Triggering
(S-ASIC)..........................................................
3-15
3.4.4 S-ASIC supply
.....................................................................................
3-19
3.4.5 ADC’s
..................................................................................................
3-19
3.4.6 Digital Control
.....................................................................................
3-20
3.4.7 LCD Control
........................................................................................
3-22
3.4.8 Power
...................................................................................................
3-23
3.4.9 Slow ADC, RS232 Serial Interface, LCD
Backlight........................... 3-28
4 Performance
Verification...................................................................
4-1
4.1
Introduction.................................................................................................
4-3
4.2 Equipment Required For Verification
........................................................ 4-3
4.3 General Instructions
....................................................................................
4-3
4.4 Operating
Instructions.................................................................................
4-4
4.4.1 Resetting the test tool
..........................................................................
4-4
4.4.2 Navigating through
menu’s..................................................................
4-4
4.4.3 Creating Test Tool
Setup1...................................................................
4-5
4.5 Display and Backlight Test
.........................................................................
4-5
4.6 Scope Input A&B Tests
..............................................................................
4-7
4.6.1 Input A&B Vertical Accuracy Test
..................................................... 4-7
4.6.2 Input A&B DC Voltage Accuracy
Test............................................... 4-9
4.6.3 Input A&B AC Voltage Accuracy Test
(LF)....................................... 4-11
4.6.4 Input A & B AC Coupled Lower Frequency Test
.............................. 4-12
4.6.5 Input A and B Peak Measurements
Test............................................. 4-13
4.6.6 Input A&B Frequency Measurement Accuracy Test
.......................... 4-14
4.6.7 Input A&B Phase Measurements
Test................................................. 4-15
4.6.8 Time Base Test
....................................................................................
4-16
4.6.9 Input A Trigger Sensitivity Test
.......................................................... 4-18
4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test
................... 4-19
4.6.11 Input B Trigger Sensitivity Test
........................................................ 4-20
4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test
................... 4-21
4.6.13 Video test using the Video Pattern Generator
................................... 4-22
4.6.14 Video test using SC600 Scope Calibration Option
........................... 4-25
4.7 External Trigger Level Test
........................................................................
4-27
4.8 Meter (DMM)
Tests....................................................................................
4-28
4.8.1 Meter DC Voltage Accuracy Test
....................................................... 4-28
4.8.2 Meter AC Voltage Accuracy & Frequency Response Test
................ 4-29
4.8.3 Continuity Function Test
.....................................................................
4-30
4.8.4 Diode Test Function Test
....................................................................
4-30
4.8.5 Ohms Measurements
Test....................................................................
4-30
4.9 Probe Calibration Generator Test
...............................................................
4-32
5 Calibration Adjustment
......................................................................
5-1
5.1 General
........................................................................................................
5-3
5.1.1
Introduction..........................................................................................
5-3
5.1.2 Calibration number and
date................................................................
5-3
5.1.3 General
Instructions.............................................................................
5-3
5.1.4 Equipment Required For Calibration
.................................................. 5-4
5.2 Calibration Procedure
Steps........................................................................
5-4
5.3 Starting the Calibration
...............................................................................
5-4
5.4 Contrast Calibration Adjustment
................................................................
5-6
5.5 Warming Up & Pre-Calibration
..................................................................
5-7
5.6 Final Calibration
.........................................................................................
5-8
5.6.1 Input A LF-HF Gain
............................................................................
5-8
5.6.2 Input B LF-HF
Gain.............................................................................
5-9
5.6.3 Input A&B LF-HF
Gain.......................................................................
5-11
5.6.4 Input A&B Position
............................................................................
5-12
5.6.5 Input A&B Volt Gain
..........................................................................
5-13
5.6.6 DMM Volt Gain
..................................................................................
5-14
5.6.7 Input A& B, and DMM Zero
...............................................................
5-15
5.6.8 DMM Ohm
Gain..................................................................................
5-16
5.6.9 Calculate
Gain..........................................................................................
5-17
5.7 Save Calibration Data and
Exit...................................................................
5-17
5.8 Probe Calibration
........................................................................................
5-19
6 Disassembling the Test Tool
............................................................. 6-1
6.1.
Introduction................................................................................................
6-3
6.2. Disassembly & Reassembly Procedures
.................................................... 6-3
6.2.1 Required Tools
....................................................................................
6-3
6.2.2 Removing the Tilt Stand & Hang
Strap............................................... 6-3
6.2.3 Replacing the Side-Strap, Changing the Side-Strap
Position.............. 6-3
6.2.4 Opening the Test Tool, Removing the
Battery.................................... 6-3
6.2.5 Removing the Main PCA Unit and the
Fan......................................... 6-5
6.2.6 Removing the Display
Assembly.........................................................
6-6
6.2.7 Replacing the LCD Window/Decal
..................................................... 6-7
6.2.8 Removing the Keypad and Keypad
Foil.............................................. 6-7
6.2.9 Disassembling the Main PCA
Unit...................................................... 6-7
6.2.10 Reassembling the Main PCA
Unit..................................................... 6-8
6.2.11 Reassembling the Test
Tool...............................................................
6-9
7 Corrective
Maintenance.....................................................................
7-1
7.1
Introduction.................................................................................................
7-3
7.2 Starting Fault Finding.
................................................................................
7-4
7.3 Charger
Circuit............................................................................................
7-5
7.4 Starting with a Dead Test Tool
...................................................................
7-7
7.4.1 Test Tool Completely
Dead.................................................................
7-7
7.4.2 Test Tool Software Does not Run.
...................................................... 7-8
7.4.3 Software Runs, Test Tool not Operative
............................................. 7-8
7.5 Miscellaneous
Functions.............................................................................
7-8
7.5.1 Display and Back Light
.......................................................................
7-8
7.5.2 Fly Back
Converter..............................................................................
7-10
7.5.3 Slow ADC,
+3V3SADC......................................................................
7-11
7.5.4
Keyboard..............................................................................................
7-12
7.5.5 Optical Port (Serial RS232
Interface)..................................................
7-13
7.5.6 Channel A, Channel B
Measurements................................................. 7-13
7.5.7 Meter Channel (Ext Trigger, Probe Cal)
............................................. 7-15
7.5.8 Input Signal Acquisition
......................................................................
7-17
7.5.9 ADC’s
..................................................................................................
7-19
7.5.10 Digital Control & Memory
................................................................
7-20
7.5.11 Buzzer Circuit
....................................................................................
7-20
7.5.12 RAM Test
..........................................................................................
7-21
7.5.13 Power
ON/OFF..................................................................................
7-22
7.5.14
Battery................................................................................................
7-22
7.6 Loading Software
........................................................................................
7-23
8 List of Replaceable
Parts...................................................................
8-1
8.1
Introduction.................................................................................................
8-3
8.2 How to Obtain
Parts....................................................................................
8-3
8.3 Service Centers
...........................................................................................
8-3
8.4 Final Assembly
Parts...................................................................................
8-4
8.5 Main PCA Unit Parts
..................................................................................
8-6
8.6 Main PCA Parts
..........................................................................................
8-8
8.7
Accessories..................................................................................................
8-30
9 Circuit Diagrams
................................................................................
9-1
9.1
Introduction.................................................................................................
9-3
9.2 Tracing signals in circuit diagrams
............................................................. 9-3
9.3 Locating Parts & Test Points
......................................................................
9-3
9.4 Diagrams
.....................................................................................................
9-6
10
Modifications......................................................................................
10-1
10.1 General
......................................................................................................
10-3
10.2 Software modifications
.............................................................................
10-3
10.3 Hardware
modifications............................................................................
10-3
10.4 Main PCA Unit Versions, Software Versions.
......................................... 10-4
Fluke-6534-Manual-Page-1-Picture
Démarrer le téléchargement gratuit


Fluke -- 199B -- Service et Manuel de l'utilisateur
Nom de fichier: Fluke-7695-Manual-Page-1-Picture
Type manuel: Service et Manuel de l'utilisateur
Pages: 204
Taille: 10.04 Mbytes (10525904 Bytes)
Langue: Anglais
Révision:
Numéro d’identification: 4822 872 05391
Date: septembre 2002
Qualité: Document scanné, tous les lisible.
Télécharger date:
MD5: 1a6bb03669d1d1dbdc351f0c38c4405f
Téléchargements: 99 depuis 08 février 2016
Informations:
1 Safety
Instructions...........................................................................................1-1
1.1
Introduction......................................................................................................1-3
1.2 Safety
Precautions.............................................................................................1-3
1.3 Caution and Warning
Statements....................................................................1-3
1.4
Symbols.............................................................................................................1-3
1.5 Impaired
Safety.................................................................................................1-4
1.6 General S afety
Information...............................................................................1-4
2
Characteristics...............................................................................................2-1
2.1
Introduction........................................................................................................2-3
2.2 Dual Input
Oscilloscope...................................................................................2-3
2.2.1 Isolated Inputs A and B
(Vertical)...........................................................2-3
2.2.2
Horizontal...................................................................................................2-4
2.2.3 Trigger and
Delay.....................................................................................2-4
2.2.4 Automatic Connect&View
Trigger........................................................2-5
2.2.5 Edge
Trigger..............................................................................................2-5
2.2.6 Isolated External
Trigger.........................................................................2-5
2.2.7 Video
Trigger............................................................................................2-5
2.2.8 Pulse Width
Trigger...................................................................................2-5
2.2.9 Continuous Auto
Set..................................................................................2-6
2.2.10 Automatic C apturing S cope S
creens.....................................................2-6
2.3 Automatic Scope
Measurements......................................................................2-6
2.3.1
General........................................................................................................2-6
2.3.2 DC Voltage
(VDC)....................................................................................2-6
2.3.3 AC Voltage
(VAC)...................................................................................2-6
2.3.4 AC+DC Voltage (True
RMS)...................................................................2-7
2.3.5 Amperes
(AMP)........................................................................................2-7
2.3.6
Peak............................................................................................................2-8
2.3.7 Frequency
(Hz)..........................................................................................2-8
2.3.8 Duty Cycle
(DUTY)..................................................................................2-8
2.3.9 Pulse Width
(PULSE)...............................................................................2-8
2.3.10 Vpwm (C versions
only)........................................................................2-8
2.3.11
Power........................................................................................................2-9
2.3.12
Phase......................................................................................................2-9
2.3.13 Temperature
(TEMP)............................................................................2-9
2.3.14 Decibel
(dB)...........................................................................................2-9
2.4
Meter.................................................................................................................2-10
2.4.1 Meter
Input...............................................................................................2-10
2.4.2 Meter
Functions.......................................................................................2-10
2.5 DMM Measurements on Meter
Inputs...........................................................2-10
2.5.1
General......................................................................................................2-10
Chapter Title Page
2.5.2 Ohms
(Ω)...................................................................................................2-10
2.5.3 Continuity
(CONT)...................................................................................2-10
2.5.4
Diode..........................................................................................................2-11
2.5.5 Temperature
(TEMP)................................................................................2-11
2.5.6 DC Voltage
(VDC)...................................................................................2-11
2.5.7 AC Voltage
(VAC).................................................................................2-11
2.5.8 AC+DC Voltage (True
RMS).................................................................2-11
2.5.9 Amperes
(AMP)......................................................................,.................2-12
2.6
Recorder...........................................................................................................2-12
2.6.1 TrendPlot (Meter or
Scope).....................................................................2-12
2.6.2 Scope
Record...........................................................................................2-12
2.7 Zoom, Replay and
Cursors..............................................................................2-13
2.7.1
Zoom.........................................................................................................2-13
2.7.2
Replay........................................................................................................2-13
2.7.3 Cursor
Measurements...............................................................................2-13
2.8
Miscellaneous...................................................................................................2-13
2.8.1
Display.....................................................................................................2-13
2.8.2 Δ
Power.................................................................................................2-13
2.8.3 Probe
Calibration.....................................................................................2-14
2.8.4
Memory....................................................................................................2-14
2.8.5
Mechanical................................................,..............................................2-14
2.8.6 Optical Interface
Port................................................................................2-14
2.9
Environmental................................................................................................2-14
2.10 /ί
Safety........................................................................................................2-15
2.11 10:1 probe
VPS200.......................................................................................2-17
2.11.1
Safety......................................................................................................2-17
2.11.2 Electrical
specifications........................................................................2-17
2.11.3
Environmental........................................................................................2-17
2.12 Electromagnetic
Immunity............................................................................2-1.8
3 Circuit
Description,,....,.,»........,.......,........,......,.......................................3-1
3.1
Introduction......................................................................................................3-3
3.2 Block
Diagram.................................................................................................3-3
3.3 Start-up Sequence, Operating
Modes...........................................................3-7
3.4 Detailed Circuit
Descriptions.........................................................................3-9
3.4.1 Scope Channel A - Scope Channel
B.....................................................3-9
3.4.2 Meter/Ext Trigger
Channel.....................................................................3-12
3.4.3 Sampling&Triggering
(S-ASIC)............................................................3-15
3.4.4 S-ASIC
supply..........................................................................................3-19
3.4.5
ADC’s....................................................................................................3-19
3.4.6 Digital
Control...........>............................................................................3-20
3.4.7 LCD
Control...........................................................................................3-22
3.4.8
Power........................................................................................................3-23
3.4.9 Slow ADC, RS232 Serial Interface, LCD
Backlight............................3-28
4 Performance
Verification............................................................................
4-1
4.1
Introduction.....................................................................................................4-3
4.2 Equipment Required For
Verification...........................................................4-3
4.3 General
Instructions.......................................................................................4-3
4.4 Operating
Instructions...................................................................................4-4
4.4.1 Resetting the test
tool............................................................................4-4
4.4.2 Navigating through
menu’s.....................................................................4-4
4.4.3 Creating Test Tool
Setup!......................................................................4-5
4.5 Display and Backlight
Test...........................................................................4-5
4.6 Scope Input A&B
Tests..................................................................................
4-7
4.6.1 Input A&B Vertical Accuracy
Test....................................................... 4-7
4.6.2 Input A&B DC Voltage Accuracy
Test................................................. 4-9
4.6.3 Input A&B AC Voltage Accuracy Test
(LF)........................................ 4-11
4.6.4 Input A&B AC Coupled Lower Frequency
Test............................... 4-12
4.6.5 Input A and B Peak Measurements
Test............................................... 4-13
4.6.6 Input A&B Frequency Measurement Accuracy
Test........................... 4-14
4.6.7 Input A&B Phase Measurements
Test.................................................. 4-15
4.6.8 Time Base
Test........................................................................................
4-16
4.6.9 Input A Trigger Sensitivity
Test...........................................................
4-18
4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth
Test................... 4-19
4.6.11 Input B Trigger Sensitivity
Test..........................................................
4-20
4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth
Test.................. 4-21
4.6.13 Video test using the Video Pattern
Generator.................................... 4-22
4.6.14 Video test using SC600 Scope Calibration Option
............................ 4-25
4.7 External Trigger Level
Test...........................................................................
4-27
4.8 Meter (DMM)
Tests.......................................................................................
4-28
4.8.1 Meter DC Voltage Accuracy
Test........................................................
4-28
4.8.2 Meter AC Voltage Accuracy & Frequency Response
Test................ 4-29
4.8.3 Continuity Function
Test........................................................................
4-30
4.8.4 Diode Test Function
Test.......................................................................
4-30
4.8.5 Ohms Measurements
Test.......................................................................
4-30
4.9 Probe Calibration Generator
Test................................................................
4-32
5 Calibration
Adjustment.....................................................................
5-1
5.1
General............................................................................................................
5-3
5.1.1
Introduction..............................................................................................
5-3
5.1.2 Calibration number and
date..................................................................
5-3
5.1.3 General
Instructions.................................................................................
5-3
5.1.4 Equipment Required For
Calibration...................................................
5-4
5.2 Calibration Procedure
Steps...........................................................................
5-4
5.3 Starting the
Calibration...................................................................................
5-4
5.4 Contrast Calibration
Adjustment...................................................................
5-6
5.5 Warming Up &
Pre-Calibration..................................................................
5-7
5.6 Final
Calibration..............................................................................................
5-8
5.6.1 Input A LF-HF
Gain...............................................................................
5-8
5.6.2 Input B LF-HF
Gain................................................................................
5-9
5.6.3 input A&B LF-HF
Gain..........................................................................
5-11
5.6.4 Input A&B
Position................................................................................
5-12
5.6.5 Input A&B Volt
Gain.............................................................................
5-13
5.6.6 DMM Volt
Gain.....................................................................................
5-14
5.6.7 Input A& B, and DMM
Zero..................................................................
5-15
5.6.8 DMM Ohm
Gain......................................................................................
5-16
5.6.9 Calculate
Gain.............................................................................................
5-17
5.7 Save Calibration Data and
Exit......................................................................
5-17
5.8 Probe
Calibration............................................................................................
5-19
6 Disassembling the Test
Tool..........................................................
6-1
6.1.
Introduction.....................................................................................................
6-3
6.2. Disassembly & Reassembly
Procedures......................................................
6-3
6.2.1 Required
Tools........................................................................................
6-3
6.2.2 Removing the Tilt Stand & Hang
Strap................................................. 6-3
6.2.3 Replacing the Side-Strap, Changing the Side-Strap
Position.............. 6-3
6.2.4 Opening the Test Tool, Removing the
Battery..................................... 6-3
6.2.5 Removing the Main PCA Unit and the
Fan............................................6-5
6.2.6 Removing the Display
Assembly..............................................................6-6
6.2.7 Replacing the LCD
Window/Decaf.........................................................6-7
6.2.8 Removing the Keypad and Keypad
Foil..................................................6-7
6.2.9 Disassembling the Main PCA
Unit.........................................................6-7
6.2.10 Reassembling the Main PCA
Unit.........................................................6-8
6.2.11 Reassembling the Test
Tool....................................................................6-9
7 Corrective
Maintenance.................................................................................7-1
7.1
Introduction......................................................................................................7-3
7.2 Starting Fault
Finding......................................................................................7-4
7.3 Charger
Circuit...................................................................................................7-5
7.4 Starting with a Dead Test
Tool......................................................................7-7
7.4.1 Test Tool Completely
Dead...................................................................7-7
7.4.2 Test Tool Software Does not
Run...........................................................7-8
7.4.3 Software Runs, Test Tool not
Operative................................................7-8
7.5 Miscellaneous
Functions.................................................................................7-8
7.5.1 Display and Back
Light............................................................................7-8
7.5.2 Fly Back
Converter....................................................................................7-10
7.5.3 Slow ADC,
+3V3SADC..........................................................................7-11
7.5.4
Keyboard..................................................................................................7-12
7.5.5 Optical Port (Serial RS232
Interface)......................................................7-13
7.5.6 Channel A, Channel B
Measurements...................................................7-13
7.5.7 Meter Channel (Ext Trigger, Probe
Cal).................................................7-15
7.5.8 Input Signal
Acquisition...........................................................................7-17
7.5.9
ADC’s.....................,.................................................................................7-19
7.5.10 Digital Control &
Memory...................................................................7-20
7.5.11 Buzzer
Circuit......................................................................................7-20
7.5.12 RAM
Test.............................................................................................7-21
7.5.13 Power
ON/OFF....................................................................................7-22
7.5.14
Battery.....................................................................................................7-22
7.6 Loading
Software.............................................................................................7-23
8 List of Replaceable
Parts............................................................................8-1
8.1
Introduction.....................................................................................................8-3
8.2 How to Obtain
Parts........................................................................................8-3
8.3 Service
Centers...............................................................................................8-3
8.4 Final Assembly
Parts.......................................................................................8-4
8.5 Main PCA Unit Parts
......................................................................................8-6
8.6 Main PCA
Parts............................................................................................8-8
8.7
Accessories.......................................................................................................8-30
9 Circuit Diagrams
..............................................................................................9-1
9.1
Introduction.......................................................................................................9-3
9.2 Tracing signals in circuit
diagrams.................................................................9-3
9.3 Locating Parts & Test
Points..........................................................................9-3
9.4
Diagrams..........................................................................................................9-6
10
Modifications.....................................................................................................10-1
10.1
General.........................................................................................................10-3
10.2 Software
modifications................................................................................10-3
10.3 Hardware
modifications................................................................................10-3
10.4 Main PCA Unit Versions, Software
Versions............................................10-4
Fluke-7695-Manual-Page-1-Picture
Démarrer le téléchargement gratuit


Fluke -- 199B -- manuel de réparation
Nom de fichier: Fluke-9187-Manual-Page-1-Picture
Type manuel: manuel de réparation
Pages: 86
Taille: 2.16 Mbytes (2265076 Bytes)
Langue: Anglais
Révision: revised
Numéro d’identification: PN 4822 872 05391
Date: 02 octobre 2009
Qualité: Électronique de documents, numérisation sans, bien lisible.
Télécharger date:
MD5: ec364392c8e1c6d05daeec0fbfc225e6
Téléchargements: 10 depuis 05 août 2017
Informations:
1
2
3
4
Title
 Page
Safety
Instructions...............................................................................
1-1
1.1
Introduction..................................................................................................1-3
1.2 Safety
Precautions........................................................................................1-3
1.3 Caution and Warning
Statements.................................................................1-3
1.4 Symbols
.......................................................................................................1-3
1.5 Impaired
Safety............................................................................................1-4
1.6 General Safety
Information..........................................................................1-4
Characteristics
.....................................................................................
2-1
List of Replaceable Parts
....................................................................
3-1
3.1
Introduction..................................................................................................3-3
3.2 How to Obtain
Parts.....................................................................................3-3
3.3 Final Assembly Parts
...................................................................................3-4
3.4 Main PCA Unit Parts
...................................................................................3-6
3.5 Accessories
..................................................................................................3-8
Performance Verification
....................................................................
4-1
4.1
Introduction..................................................................................................4-3
4.2 Equipment Required For Verification
.........................................................4-3
4.3 General Instructions
.....................................................................................4-3
4.4 Operating
Instructions..................................................................................4-4
4.4.1 Resetting the test tool
...........................................................................4-4
4.4.2 Navigating through menu’s
..................................................................4-4
4.4.3 Creating Test Tool
Setup1....................................................................4-5
4.5 Display and Backlight
Test..........................................................................4-5
4.6 Scope Input A&B Tests
...............................................................................4-7
4.6.1 Input A&B Vertical Accuracy Test
......................................................4-7
4.6.2 Input A&B DC Voltage Accuracy
Test................................................4-9
4.6.3 Input A&B AC Voltage Accuracy Test (LF)
.......................................4-11
4.6.4 Input A & B AC Coupled Lower Frequency
Test...............................4-12
4.6.5 Input A and B Peak Measurements
Test..............................................4-13
4.6.6 Input A&B Frequency Measurement Accuracy Test
...........................4-14
4.6.7 Input A&B Phase Measurements
Test..................................................4-15
4.6.8 Time Base Test
.....................................................................................4-16
4.6.9 Input A Trigger Sensitivity
Test...........................................................4-17
4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test
....................4-19
4.6.11 Input B Trigger Sensitivity Test
.........................................................4-20
4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test
....................4-21
4.6.13 Video test using the Video Pattern Generator
....................................4-22
4.6.14 Video test using SC600 Scope Calibration Option
............................4-24
4.7 External Trigger Level Test
.........................................................................4-27
4.8 Meter (DMM)
Tests.....................................................................................4-28
4.8.1 Meter DC Voltage Accuracy Test
........................................................4-28
4.8.2 Meter AC Voltage Accuracy & Frequency Response Test
.................4-29
4.8.3 Continuity Function
Test......................................................................4-30
4.8.4 Diode Test Function Test
.....................................................................4-30
4.8.5 Ohms Measurements
Test.....................................................................4-30
4.9 Probe Calibration Generator Test
................................................................4-32
5
 Calibration Adjustment
.......................................................................
5-1
5.1
General.........................................................................................................5-3
5.1.1 Introduction
..........................................................................................5-3
5.1.2 Calibration number and
date.................................................................5-3
5.1.3 General
Instructions..............................................................................5-3
5.1.4 Equipment Required For Calibration
...................................................5-4
5.2 Calibration Procedure
Steps.........................................................................5-4
5.3 Starting the Calibration
................................................................................5-4
5.4 Contrast Calibration Adjustment
.................................................................5-6
5.5 Warming Up &
Pre-Calibration...................................................................5-7
5.6 Final Calibration
..........................................................................................5-8
5.6.1 Input A LF-HF Gain
.............................................................................5-8
5.6.2 Input B LF-HF Gain
.............................................................................5-9
5.6.3 Input A&B LF-HF Gain
.......................................................................5-11
5.6.4 Input A&B Position
.............................................................................5-12
5.6.5 Input A&B Volt Gain
...........................................................................5-13
5.6.6 DMM Volt Gain
...................................................................................5-14
5.6.7 Input A& B, and DMM
Zero................................................................5-15
5.6.8 DMM Ohm Gain
..................................................................................5-16
5.6.9 Calculate
Gain...........................................................................................5-17
5.7 Save Calibration Data and
Exit....................................................................5-17
5.8 Probe Calibration
.........................................................................................5-19
6
 Disassembling the Test
Tool..............................................................
6-1
6.1.
Introduction.................................................................................................6-3
6.2. Disassembly & Reassembly Procedures
.....................................................6-3
6.2.1 Required Tools
.....................................................................................6-3
6.2.2 Removing the Tilt Stand & Hang
Strap................................................6-3
6.2.3 Replacing the Side-Strap, Changing the Side-Strap
Position...............6-3
6.2.4 Opening the Test Tool, Removing the
Battery.....................................6-3
6.2.5 Removing the Main PCA Unit and the
Fan..........................................6-5
6.2.6 Removing the Display Assembly
.........................................................6-6
6.2.7 Replacing the LCD Window/Decal
......................................................6-7
6.2.8 Removing the Keypad and Keypad
Foil...............................................6-7
6.2.9 Disassembling the Main PCA
Unit.......................................................6-7
6.2.10 Reassembling the Main PCA
Unit......................................................6-8
6.2.11 Reassembling the Test Tool
...............................................................6-9
Fluke-9187-Manual-Page-1-Picture
Démarrer le téléchargement gratuit


Commentaires

Pas encore de commentaires.

Ajouter un Commentaire

* Informations obligatoires
(ne sera pas publiée)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the fifth month of the year?
 
Entrez la réponse:
 
Avertissez-moi des nouveaux commentaires par e-mail.
 
Se souvenir de moi sur cet ordinateur.
 
 
Powered by Commentics