Información sobre equipo

Fluke 8020A Multímetro digital
Fabricante:
Fluke
Modelo: 8020A
Fecha: 1979
Categoría: Los instrumentos de medición
Grupo: Multímetro digital
Descripción:
Información:
                                    Your John Fluke Model 8020A is a pocket-sized digital
multimeter that is ideally suited for application in the
field, lab, shop or home. Some of the features of your
instrument are:
Φ All VOM functions plus the versatile conductance function
(six in all) are included as standard.
• DC Voltage - 100 μ V to 1000V
• AC Voltage- 100 /tV to 750V
• DC Current - 1 μΑ to 2000 mA
• AC Current - I μΑ to 2000 mA
• Resistance - 0.1Π - 20 ΜΩ
• Conductance - 0.1 nS to 200 nS and .001 mS to 2 mS (S =
siemens = I/O).
• CONDUCTANCE - A new multimeter function that allows fast,
accurate, noise free resistance measurements up to 10,000 ΜΩ.
• 3 I /2 digit liquid crystal display, a high contrast
display that can be read easily from across the room. No
more worries about bent needles, parallax, etc.
• Each range has:
• Full auto-polarity operation.
• Overrange indication.
• Effective protection for overloads up to 1000V dc and
transients up to 6000V peak.
• Dual slope integration measurement technique to insure
noise-free measurements.
• Long term calibration stability - I year. Easy calibration
- few adjustments.
• Lightweight - 369 grams (13 ounces).
• Up to 200 hours of continuous operation can be expected
from a single, inexpensive, 9V, alkaline battery (transistor
radio/calculator type).
Φ Low battery voltage automatically detected and displayed.
• Line operation is possible using a Model A81 Battery
Eliminator (see Section 6, Accessories).
• Protected test leads - finger guards on the probes and
shrouded contacts on the connectors discourage accidental
contact with circuit voltages.
• A full line of accessories that extend the range and scope
of your instrument.

Estos manuales están disponibles para el equipo anterior:

Fluke -- 8020A -- Suplemento Manual de servicio
Nombre de archivo:: Fluke-138-Manual-Page-1-Picture
Tipo de Manual:: Suplemento Manual de servicio
Páginas:: 10
Tamaño:: 494.75 Kbytes (506626 Bytes)
Idioma: Inglés
Revisión: 3
Número de identificación:
Fecha: octubre 1980
Calidad: Documento Scaned, todo legible.
Añadir fecha:
MD5: 838fd6c4459463f5fbcfb170fae65c4c
Descargas: 1490 desde 14 enero 2008
Información:
Fluke 8020A  Digital multimeter
Fluke-138-Manual-Page-1-Picture
Descarga gratuita de inicio


Fluke -- 8020A -- Manual de servicio
Nombre de archivo:: Fluke-2360-Manual-Page-1-Picture
Tipo de Manual:: Manual de servicio
Páginas:: 79
Tamaño:: 5.77 Mbytes (6052638 Bytes)
Idioma: Inglés
Revisión: 3/79
Número de identificación: 515825
Fecha: abril 1979
Calidad: Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Añadir fecha:
MD5: 37e37f5e7ee47f819d6bfe188e43b110
Descargas: 985 desde 29 enero 2011
Información:
Fluke-2360-Manual-Page-1-Picture
Descarga gratuita de inicio


Fluke -- 8020A -- Servicio y Manual del usuario
Nombre de archivo:: Fluke-7613-Manual-Page-1-Picture
Tipo de Manual:: Servicio y Manual del usuario
Páginas:: 89
Tamaño:: 5.48 Mbytes (5744947 Bytes)
Idioma: Inglés
Revisión:
Número de identificación: 515825
Fecha: abril 1979
Calidad: Documento Scaned, todo legible.
Añadir fecha:
MD5: efa7220fd3a83ce82d332e4414d5c519
Descargas: 59 desde 27 enero 2016
Información:
1 INTRODUCTION AND SPECIFICATIONS
..............................1-1
l-l. INTRODUCTION l-l
I-3. PREPARING FOR OPERATION ............... I-2
I-4. Unpacking 1-2
I-7. Battery Installation/'Replacement ................. I-2
I-9. PHYSICAL FEATURES 1-4
1-Il. INITIAL CHECK-OUT PROCEDURE
............................ 1-4
I -13. ACCESSORIES 1-6
I -15. SPECIFICATIONS I-6
2 OPERATING INSTRUCTIONS
.....................................................2-1
2-I.
INTRODUCTION..................................................................2-I
2-3. INPUT POWER 2-i
2-4. Battery Life 2-1
2-6. Line Power Operation 2-1
2-8. OPERATING NOTES 2-2
2-10. Input Overload Protection
....................................2-12. Input Connections
to COMMON ................2-3
2-14. Fuse Replacement 2-3
2-16. The Display 2-3
2-20. OPERATION 2-4
2-22. MEASUREMENT TECHNIQUES ..............2-5
2-24. AC Measurement 2-5
2-26. Voltage AC/DC 2-5
2-29. Current AC/DC 2-5
2-33. Resistance 2-9
2-37. Conductance 2-10
2-41. APPLICATIONS 2-10
2-43. Transistor Tester 2-10
2-48. Leakage Tester
.....................................................................2-13
3 THEORY OF OPERATION
.............................................................3-1
3-1.
INTRODUCTION...................................................................3-1
3-3. OVERALL FUNCTIONAL DESCRIPTION ....3-1
3-8. BLOCK DIAGRAM ANALYSIS ..............3-3
3-9. A/D Converter 3-3
3-18. Input Signal Conditioners
................................................3-6
4 MAINTENANCE
................................................................................4-1
4-1.
INTRODUCTION..................................................................4-1
4-3. SERVICE INFORMATION 4-1
4-7. GENERAL INFORMATION ...................4-2
4-8. Access Information 4-2
4-17. Cleaning 4-5
4-19. Battery/Fuse Replacement 4-5
4-21. PERFORMANCE TEST 4-5
4-23. Initial Procedure 4-5
4-25. Display Test
.......................................................................4-6
4-27. Resistance/Conductance Test ...................4-6
4-29. DC Voltage Test .......................4-7
4-31. AC Voltage Test 4-7
4-33. DC Current Test 4-8
4-35. CALIBRATION 4-9
4-38. TROUBLESHOOTING
........................................................4-10
5 LIST OF REPLACEABLE PARTS
................................................5-1
5-1.
INTRODUCTION..................................................................5-1
5-4. HOW TO OBTAIN PARTS
................................................5-2
6 OPTIONS AND ACCESSORIES
..................................................6-1
6-1.
INTRODUCTION..................................................................6-1
6-3. DELUXE CARRYING CASE ..................6-1
6-5. TEMPERATURE PROBE (80T-150) ............6-1
6-6. Introduction 6-1
6-8. Specifications 6-1
6-9. CURRENT TRANSFORMER (801-600) ......... 6-4
6-10. Introduction 6-4
6-12. Specifications 6-4
6-13. HIGH VOLTAGE PROBE (80K-40) .............6-4
6-14. Introduction 6-4
6-16. Specifications 6-4
6-17. HIGH FREQUENCY PROBE (81RF) ...........6-4
6-18. Introduction 6-4
6-20. Specifications 6-5
6-21. HIGH FREQUENCY PROBE (82RF) ...........6-5
6-22. Introduction 6-5
6-25. Specifications 6-5
6-26. BATTERY ELIMINATOR (A81) ...............6-5
6-28. CURRENT SHUNT (80J-10) 6-6
6-29. Introduction 6-6
6-31. Specifications 6-6
7 SCHEMATIC
DIAGRAMS..............................................................7-1
APPENDIX
A.....................................................................................A-1

Fluke-7613-Manual-Page-1-Picture
Descarga gratuita de inicio


Fluke -- 8020A -- Servicio y Manual del usuario
Nombre de archivo:: Fluke-7722-Manual-Page-1-Picture
Tipo de Manual:: Servicio y Manual del usuario
Páginas:: 50
Tamaño:: 2.15 Mbytes (2257243 Bytes)
Idioma: Inglés
Revisión: 2
Número de identificación:
Fecha: 1978
Calidad: Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Añadir fecha:
MD5: bb2807ec85fbdb3be72fd3ee8555e784
Descargas: 145 desde 13 febrero 2016
Información:
1 INTRODUCTION AND
SPECIFICATIONS....................................1-1
1-1. INTRODUCTION
..................................................................1-1
1-3. PREPARING FOR OPERATION
.........................................1-1
1-1.
Unpacking.........................................................................1-1
1-6. Battery
Installation..........................................................1-2
1-8. GETTING
ACQUAINTED....................................................1-2
1-10. Physical
Features..............................................................1-2
1-12. Initial Check-Out
Procedure.............................................1-2
1-14. SPECIFICATIONS
.............................................................1-4
2 OPERATING
INSTRUCTIONS..........................................................2-1
2-10. INTRODUCTION
................................................................2-1
2-3. OPERATING
NOTES............................................................2-1
2-5. Input Power
......................................................................2-1
2-12. Display Readings
..............................................................2-2
2-15. Input Connections to
COMMON.....................................2-2
2-17. Input Overload
Protection.................................................2-2
2-19. Fuse
Replacement..............................................................2-3
2-22. AC
Measurement..............................................................2-3
2-24.
Resistance.........................................................................2-3
2-27. Voltage AC
/DC................................................................2-4
2-30. Current
AC/DC................................................................2-5
2-33.
Conductance.....................................................................2-5
2-37. OPERATION
.......................................................................2-6
2-39. APPLICATIONS
..................................................................2-6
2-41. Transistor
Tester................................................................2-7
2-46. Leakage Tester
..................................................................2-8
3 THEORY OF OPERATIONS
..........................................................3-1
3-1. INTRODUCTION
..................................................................3-1
3-3. OVERALL FUNCTIONAL DESCRIPTION........................3-1
3-8. BLOCK DIAGRAM
ANALYSIS...........................................3-2
3-9. AID
Converter..................................................................3-2
3-18. Input Signal
Conditioners.................................................3-2
4
MAINTENANCE.............................................................................4-1
4-1. INTRODUCTION
..................................................................4-1
4-3. SERVICE
INFORMATION...................................................4-1
4-7. GENERAL INFORM
ATION.................................................4-2
4-8. Access
Information............................................................4-2
4-17.
Cleaning.............................................................................4-3
4-19. Battery/Fuse Replacement
...............................................4-3
4-21. PERFORMANCE
TEST..........................................................4-3
4-23. initial
Procedure................................................................4-3
4-25.
DisplayTest.......................................................................4-3
4-27. Resistance/Conductance
Test..........................................4-4
4-29. DC Voltage
Test..................................................................4-4
4-31. AC Voltage
Test..................................................................4-4
4-33. DC Current
Test..................................................................4-5
4-35. CALIBRATION
....................................................................4-5
4-38. TROUBLESHOOTING
.......................................................4-5
5 LIST OF REPLACEABLE
PARTS..........................................................5-1
5-I.
INTRODUCTION...................................................................5-1
5-4. HOW TO OBTAIN
PARTS....................................................5-1
6 OPTIONS AND
ACCESSORIES..........................................................6-1
6-1.
INTRODUCTION...................................................................6-1
6-3. DELUXE CARRY! NO
CASE(C90).......................................6-1
6-5. BATTERY ELIMINATOR
(A81)...........................................6-1
6-7. TEMPERATURE
PROBE(80T-I50).....................................6-2
6-8. Introduction
....................................................................6-2
6-IÜ.
Specifications......................................................................6-2
6-11. CURRBNTTRANSFORMER
(801-600).............................. 6-2
6-12.
Introduction......................................................................6-2
6-14.
Specifications.....................................................................6-2
6-15. HIGH VOLTAGE PROBE(80K-40)
....................................6-2
6-16.
Introduction.......................................................................6-2
6-18.
Specifications...................................................................6-2
6-19. HIGH FREQUENCY PROBE(81RF)
................................6-2
6-20.
Introduction....................................................................6-2
6-22
Specifications......................................................................6-2
7 SCHEMATIC
DIAGRAMS................................................................7-1
SERVICE
CENTERS.............................................................................7-3
SERVICE
REPORT...............................................................................7-5
WARRANTY
APPENDIX A - Manual Change information
Fluke-7722-Manual-Page-1-Picture
Descarga gratuita de inicio


Comentarios (1)

Usted está opinando sobre: Fluke 8020A
Sort
0/5 (0)
Facebookdel.icio.usStumbleUponDiggTechnoratiGoogle+RedditMySpaceTwitterLinkedIn
Gravatar
Mildred Felton dice...
I'm looking for fluke 8020a operator's guide. Its a card about 3 x 6.5 inches that fits inside the meter case. Ours is damaged and unreadable. If someone could scan and email both sides i could print and laminate. Thanks.
4 July 2016 21.04
Página 1 de 1

Agregar Comentario

* Información requerida
(no será publicado)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the third letter of the word castle.
 
Introduzca la respuesta:
 
Informarme de los nuevos comentarios por Email.
 
Recordar mis datos en este equipo.
 
 
Powered by Commentics