Equipment information
Yamaha PM1200 Mixer
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Yamaha PM1200 ?
If you have any other manuals for the
Yamaha PM1200 you can upload the files here .
Model:
PM1200
Date:
Category:
Group:
Description:
Proffesional Audio Mixing Console
Information
The Yamaha PM1200 mixing console has been designed primarily
for sound reinforcement applications, but its versatility
makes it suitable for other applications, including
sophisticated broadcast and recording systems. Features include:
• Two different types of input channel in the same mixing
console-single-input for Microphone inputs and mono line
sources, and two-input for stereo sound sources at both
Microphone and line levels. This enables more flexibility in
working, and more inputs to be handled efficiently in less
desk space.
• 2 pads and a rotary gain control on each input channel,
allowing 0, -10, -20, or -30 dB of pad in addition to up to
-40 dB of continuous adjustment.
• +48 V phantom powering individually switchable on each
input channel.
• Single Input channel insert points, allowing Post-EQ
compression, gating, etc.
• Clip and signal indicators on each channel, which are
jumper-selectable as pre- or post-EQ indicators.
• 4 AUX sends which may be selected from the front panel as
pre- or post-fader. Two stereo AUX returns may be routed to
pairs of output groups or to the stereo mix.
• Three-band EQ with sweepable MID frequency (350 Hz-5 kHz)
on single-input channels, and two-band EQ on stereo input
channels. All channels feature a switchable 80 Hz high-pass
filter.
• Four output groups with insert and SUB IN facilities.
• A sophisticated flexible muting system, allowing 4
independent combinations of input channels to be chosen for
muting.
• A flexible CUE/SOLO facility, giving complete control over
monitoring of signals.
• ON/OFF switches (with illuminated indicators for an
instant visual check) for each input channel, AUX send,
group, and stereo master, making for easy silent muting of
inputs and final output.
* Durable, long -throw, conductive plastic calibrated faders
give smooth, easy dynamic control over the mix.
* Two PM1200 mixing consoles may be linked together (via the
full SUB IN facilities), and the muting, cue, and solo
facilities may also be linked, providing control from one
"master" console.
* Talkback can be routed to groups, the stereo mix, or the
AUX outputs. A1 kHz line-up oscillator is also provided.
* XLR-3 type connectors provide balanced inputs and outputs,
wired in accordance with DIN standards, with shield (earth)
to pin 1, "hot" to pin 2 and "cold" to pin 3. SUB inputs use
1 /4-inch phone connectors, and INSERTS are TRS phone
connectors.
Manual Type:
Service and User Manual
Pages:
32
Size:
2.65 Mbytes (2775165 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2017 10 26
MD5:
acb663944d27986e2b7b64451126db69
Downloads:
602
Information
Level 2 Service Manual
On the DD-163, SY-69 boards
This service manual provides the information that is
premised the
circuit board replacement service and not intended repair
inside the
DD-163, SY-69 boards.
Therefore, schematic diagram, printed wiring board and
electrical
parts list of the DD-163, SY-69 boards are not shown.
The following pages are not shown.
SY-69 board
Schematic diagram ... Page
4-15 to 4-36
Printed wiring board ...
Page 4-11 to 4-14
Electrical parts list
... Page 6-10 to 6-15
DD-163 board
Schematic diagram ... Page
4-47 to 4-52
Printed wiring board ...
Page 4-43 to 4-46
Electrical parts list
... Page 6-6 to 6-8
The above-described information is shown in service manual
Level 3.