Información sobre equipo

ARP Instruments Inc. Odyssey 2822 Sintetizador
Fabricante:
ARP Instruments Inc.
Modelo: Odyssey 2822
Fecha: 1978
Categoría: Equipo de música profesional
Grupo: Sintetizador
Descripción:
Información:
                                    Three types of Odyssey models have been produced: I) 2800,
2) 2810-2815 and 3) 2820-2823. The model and serial number
are located at the rear or bottom of the Odyssey chassis.
Except for 2800, a typical number might read: 2813-0490. For
model 2800, the first two digits of the serial number denote
the model, such as: 28490. Listed below are the board
identification numbers for each model; they will be
referenced in the service manual by model number for easy
identification.

Model Changes
The Odyssey has undergone major cosmetic and electrical
changes since its original production in 1972, however, the
functional capabilities have remained virtually unchanged.
The following are the most noticeable physical differences
among models:

MODEL 2800
Black and white face panel (some later models have black and
gold face panels).

Pitch Bend knob

No Factory installed interface jacks.

Wrap around vinyl bottom cover.

MODEL 2810-2813

Black and gold face panel.

New style power switch.

Factory installed interface jacks*

Pitch Bend knob. (Some later models have PPC.)

Wrap around vinyl bottom cover.

MODEL 2820-2823 (current model, Odyssey '78)

Black and orange face panel.

Steel chassis Leather endblocks -

PPC

The major electrical changes found in the Odyssey-II as
compared to the Odyssey-I are:
1.	Uses 24db/octave filter in place of 12db/? octave.
2.	Improved VCO design for better tracking# and stability.
3.	Improved power supply regulation.
4.	Improved keyboard current source for CV generation.
5.	Improved S/H memory circuit design.

Estos manuales están disponibles para el equipo anterior:

Tipo de Manual:: Manual de servicio ARP-9678-Manual-Page-1-Picture
Páginas:: 44
Tamaño:: 11.54 Mbytes (12101282 Bytes)
Idioma: Inglés
Revisión:
Número de identificación:
Fecha: 01 enero 1978
Calidad: Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Añadir fecha:
MD5: 4d0d54d49eb787036dcab9aabff8b04d
Descargas: 150 desde 15 octubre 2017
Información:
This service manual is divided into three major sections: A)
Circuit Descriptions, B) Trim Procedures, and C) Board Test
Points. The circuit descriptions should be consulted when a
problem is suspected in a particular area of the instrument.
The trim procedures should be used to verify calibrations or
when a component has been changed. The board test points are
a quick reference to verify circuits with suspected problems
and should be checked whenever a problem has been identified.
ARP-9678-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics