Geräte Informationen

IOTech Digital488/80A Interface
Modell: Digital488/80A
Datum: 1998
Kategorie: Messgeräte
Gruppe: Interface
Beschreibung: 80-Bit IEEE 488 / Digital I/O Interface
                                    The Digital488/80A is a digital input and output interface
to the IEEE 488 bus that enables an IEEE 488 controller
to program 80 bits of TTL level signals as either inputs
or outputs. It includes six handshake/control lines
for each 40-bit channel and two addressing modes. The
unit is fully programmable, including the power-up
configuration, which is stored in non-volatile RAM.
The internal data buffer in the Digital488/80A can store
up to 2,000 40-byte words. With the addition of the HVCX1
High Current/High Voltage Interface option, the I/O
lines can be configured as high voltage inputs or
as high current/high voltage outputs to allow interfacing
with solenoids, switching relays and other high voltage/high
current devices.

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Bedienungsanleitung IOTech-4593-Manual-Page-1-Picture
Seitenanzahl: 106
Dateigröße: 6.46 Mbytes (6778172 Bytes)
Sprache: Englisch
Revision: 1.2
Dokument-ID/Nummer: 196-0901 and/or 967695
Datum: 1998
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: ef1459ba488855c90100e5ee059bfa6b
Downloads: 151 seit dem 13 Juli 2013

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics