Geräte Informationen

Tektronix 2215A Oszilloskop
Hersteller:
Tektronix
Modell: 2215A
Datum: 1983
Kategorie: Messgeräte
Gruppe: Oszilloskop
Beschreibung: Dual Channel 60MHz Oscilloscope
Informationen:
                                    The TEKTRONIX 2215A Oscilloscope is a rugged, lightweight,
dual-channel, 60-MHz instrument that features a bright,
sharply defined trace on an 80- by 100-mm cathode-ray tube
(crt). Its vertical system provides calibrated deflection
factors from 2 mV per division to 5 V per division. Trigger
circuits enable stable triggering over the full bandwidth of
the vertical system. The horizontal system provides
calibrated sweep speeds from 0.5 s per division to 50 ns per
division along with delayed-sweep features. A X10 magnifier
circuit extends the maximum sweep speed to 5 ns per division
when the A and B SEC/DIV switch is set to 0.05 per division.

Folgende Handbücher sind hierfür verfügbar:

Tektronix -- 2215A -- Serviceanleitung
Dateiname: Tektronix-1776-Manual-Page-1-Picture
Dokumenttyp: Serviceanleitung
Seitenanzahl: 203
Dateigröße: 33.42 Mbytes (35047502 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 070-4735-00
Datum: Juli 1984
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 5db93475a54ac15fce043f0e260cd7d1
Downloads: 2610 seit dem 21 Dezember 2009
Informationen:
Tektronix-1776-Manual-Page-1-Picture
Kostenlos herunterladen


Tektronix -- 2215A -- Bedienungsanleitung
Dateiname: Tektronix-2570-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 46
Dateigröße: 36.90 Mbytes (38692414 Bytes)
Sprache: Englisch
Revision: Revised
Dokument-ID/Nummer: 070-4732-00
Datum: Dezember 1983
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 7f2f26266d5b5cf0cef3a5b7bf0c6170
Downloads: 1358 seit dem 18 Juni 2011
Informationen:
Tektronix-2570-Manual-Page-1-Picture
Kostenlos herunterladen


Tektronix -- 2215A -- Serviceanleitung
Dateiname: Tektronix-8936-Manual-Page-1-Picture
Dokumenttyp: Serviceanleitung
Seitenanzahl: 203
Dateigröße: 38.84 Mbytes (40729394 Bytes)
Sprache: Englisch
Revision: revised
Dokument-ID/Nummer: 070-4735-00
Datum: 01 Juli 1984
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 4a02cf3d1ad6e050d923201c743ed599
Downloads: 30 seit dem 23 April 2017
Informationen:
LIST OF ILLUSTRATIONS
........................................iii

LIST OF TABLES
......................................................iii

OPERATORS SAFETY SUMMARY ..........................iv

SERVICING SAFETY SUMMARY..............................v

SECTION 1 SPECIFICATION

INTRODUCTION ................................1-1

ACCESSORIES..................................1-1

PERFORMANCE CONDITIONS ________1-1

SECTION 2 OPERATING INSTRUCTIONS

PREPARATION FOR USE ................2-1

SAFETY ........................................2-1

LINE VOLTAGE ............................2-1

POWER CORD ..............................2-1

LINE FUSE ....................................2-1

INSTRUMENT COOLING..............2-2

CONTROLS, CONNECTORS, AND

INDICATORS......................................2-2

POWER, DISPLAY, AND PROBE

ADJUST ........................................2-2

VERTICAL ....................................2-3

HORIZONTAL................................2-4

TRIGGER ......................................2-5

REAR PANEL ................................2-7

OPERATING CONSIDERATIONS ...	2-8

GRATICULE ..................................2-8

GROUNDING ................................2-8

SIGNAL CONNECTIONS ..............2-8

INPUT COUPLING CAPACITOR

PRECHARGING ............................2-8

OPERATOR'S ADJUSTMENTS ________2-9

INTRODUCTION ..........................2-9

BASELINE TRACE........................2-9

TRACE ROTATION........................2-9

PROBE COMPENSATION ............2-10

SECTION 3 THEORY OF OPERATION

INTRODUCTION ................................3-1

SECTION ORGANIZATION ..........3-1

INTEGRATED CIRCUIT DESCRIPTIONS
............................................3-1

GENERAL DESCRIPTION ................3-2

DETAILED CIRCUIT DESCRIPTION	3-3

VERTICAL ATTENUATORS..........3-3

VERTICAL PREAMPLIFIERS ...	3-4
SECTION 3 THEORY OF OPERATION (cont)

CHANNEL SWITCH AND

VERTICAL OUTPUT .......... 3-5

TRIGGER AMPLIFIERS AND

SWITCHING ................. 3-7

A TRIGGER GENERATOR............3-8

A SWEEP GENERATOR AND

LOGIC............................................3-9

ALTERNATE B SWEEP ................3-11

HORIZONTAL ................................3-13

Z-AXIS AMPLIFIER ......................3-14

POWER SUPPLY AND PROBE

ADJUST ........................................3-16

SECTION 4 PERFORMANCE CHECK PROCEDURE

INTRODUCTION ................................4-1

PURPOSE ..................................4-1

STRUCTURE ................................4-1

TEST EQUIPMENT ......................4-1

LIMITS AND TOLERANCES ....	4-1

PREPARATION FOR CHECKS ..	4-2 INDEX TO PERFORMANCE

CHECK STEPS ............................4-3

VERTICAL ....................................4-4

HORIZONTAL................................4-7

TRIGGER ......................................4-11

EXTERNAL Z-AXIS AND PROBE

ADJUST ........................................4-14

SECTION 5 ADJUSTMENT PROCEDURE

INTRODUCTION ................................5-1

PURPOSE ....................................5-1

STRUCTURE ................................5-1

TEST EQUIPMENT ......................5-1

LIMITS AND TOLERANCES ....	5-1

ADJUSTMENT INTERACTION ..	5-1 PREPARATION FOR

ADJUSTMENT ..............................5-1

INDEX TO ADJUSTMENT

PROCEDURE STEPS ..................5-3

POWER SUPPLY AND CRT DISPLAY	5-4

VERTICAL..........................................5-6

HORIZONTAL ....................................5-13

TRIGGER ..........................................5-19

EXTERNAL Z-AXIS AND PROBE

ADJUST ............................................5-23
MAINTENANCE
STATIC-SENSITIVE COMPONENTS
PREVENTIVE MAINTENANCE
INTRODUCTION .............
GENERAL CARE .............
INSPECTION AND CLEANING . .
LUBRICATION ...............
SEMICONDUCTOR CHECKS . . .
PERIODIC READJUSTMENT .. .
TROUBLESHOOTING............
INTRODUCTION .............
TROUBLESHOOTING AIDS
TROUBLESHOOTING
EQUIPMENT ................
TROUBLESHOOTING
TECHNIQUES ...............
CORRECTIVE MAINTENANCE
INTRODUCTION .............
MAINTENANCE PRECAUTIONS .
OBTAINING REPLACEMENT
PARTS .....................
MAINTENANCE AIDS .........
MAINTENANCE (cont)
INTERCONNECTIONS .........
TRANSISTORS AND
INTEGRATED CIRCUITS .......
SOLDERING TECHNIQUES ....
REMOVAL AND REPLACEMENT
INSTRUCTIONS ..............
REPACKAGING FOR SHIPMENT
SELECTABLE COMPONENTS ..

OPTIONS

REPLACEABLE ELECTRICAL PARTS

DIAGRAMS

REPLACEABLE MECHANICAL PARTS

Accessories
Tektronix-8936-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the sum of 1 + 2 + 3?
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics