Geräte Informationen

Kenwood TR-9130 Transceiver
Hersteller:
Kenwood
Modell: TR-9130
Datum: 1982
Kategorie: Funk und Kommunikation
Gruppe: Transceiver
Beschreibung: 2m All Mode Transceiver
Informationen:
                                    1.	2m all band transceiver for FM, SSB (USB, LSB), and CW
operation.

2.	Rotary click, 100Hz step (1kHz, 5kHz, 12.5kHz and 25kHz
steps depending on the mode and the position of the DS
switch) digital 2-VFO system specifically designed for
mobile operation.

3.	Five-digit display indicates frequency of all operating
modes.

4.	TX OFFSET switch shifts frequencies ± 600kHz for

«

standard repeater operation.

5.	Six memory channels. Two different frequencies (transmit
and receive) are stored in CH6, permitting "odd-split"
repeater operation.

6.	A newly designed SSB squelch circuitry is employed to
provide comfortable operation as well as in FM mode.

7.	Optimum frequency step to suit each mode can be selected
by the DS switch.
8.	Incorporates auto scan circuit (BUSY signal stops in all
FM mode).

9.	Automatic selection of RIT, NB, RF GAIN and AGC.

►

10.	The transceiver has a memory scan circuit which scans
only the channels stored in the memory.

11.	The CW break-in circuitry and the side-tone circuitry
available in all modes are incorporated.

12.	Hand microphone with frequency UP-DOWN switch.

13.	In the SSB/CW mode, the transmit frequency is variable
and can be used for Oscar communication.

14.	RF POWER HI-LOW switch.

1 5. Unique escutcheon design allows easy installation for
mobile operation.

16.	Full variety of accessory terminals (KEY, AUX, BACK UP,
STBY, EXT SP).

17.	A memory back-up Ni-Cd battery can be installed.

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Serviceanleitung Kenwood-891-Manual-Page-1-Picture
Seitenanzahl: 38
Dateigröße: 4.73 Mbytes (4954888 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: B51-0954-00 (K)(M)(T)(KW)1500(G)
Datum: Februar 1982
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 732f7ee62762ad6c9fcdc5e716d51295
Downloads: 3639 seit dem 04 November 2008
Informationen:
Kenwood-891-Manual-Page-1-Picture


Dokumenttyp: Serviceanleitung Kenwood-2599-Manual-Page-1-Picture
Seitenanzahl: 38
Dateigröße: 9.41 Mbytes (9862819 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: B51-0954-00
Datum: Februar 1982
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: fc646e7263b7efa54c51f515bfd77481
Downloads: 1817 seit dem 10 Juli 2011
Informationen:
Kenwood-2599-Manual-Page-1-Picture


Dokumenttyp: Schaltplan Kenwood-10792-Manual-Page-1-Picture
Seitenanzahl: 3
Dateigröße: 284.61 Kbytes (291445 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 6f9c6d4692512f5676233bd34f20bbce
Downloads: 2 seit dem 30 April 2018
Informationen:
Kenwood-10792-Manual-Page-1-Picture


Dokumenttyp: Service- und Bedienungsanleitung Kenwood-10793-Manual-Page-1-Picture
Seitenanzahl: 21
Dateigröße: 1.90 Mbytes (1992790 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 2cce229616475e2e258eba02dcd72658
Downloads: 2 seit dem 30 April 2018
Informationen:
FEATURES................................................................................................................................
3

BEFORE
USE..............................................................................................................................
3

SPECIFICATIONS
.......................................................................................................................
4

SECTION 1. PREPARATION FOR
USE.............................................................................................
5

1.1
Accessories..........................................................................................................
5

1.2
Installation.........................................................................................*.......
....... 5

SECTION 2. CONTROLS AND TERMINALS..................... .
......................................... 8

2.1	Front
panel.........................................................................................................
8

2.2	Rear
panel............................................................................................................10

SECTION 3. OPERATION
.............................................................................................................11

3.1	Mode
switch.........................................................................................................11

3.2	Digital
VFO...........................................................................................................11

3.3	DS
switch............................................................................................................12

3.4	Memory
switch.....................................................................................................12

3.5	Scan
operation......................................................................................................13

3.6	TX Offset
switch...................................................................................................13

3.7
Squelch...............................................................................................................13

3.8	RIT and RIT switch...................
...........................................................................
.13

3.9	NB (Noise blanker)...................................
.............................................................14

3.10	RF GAIN and S
meter..............................................................................................14

3.11	HI/LOW
switch......................................................................................................14

3.12	T ransmitter
precautions..........................................................................................14

3.13	CW
operation........................................................................................................14

3.14	Aux
terminal.........................................................................................................1
5

3.15	BATTERY
installation.............................................................................................15

3-16 TONE
switch........................................................................................................15

SECTION 4. OPTIONAL
ACCESSORIES..........................................................................................16

BLOCK
DIAGRAMS.....................................................................................................................17

SCHEMATIC
DIAGRAMS.............................................................................................................19
Kenwood-10793-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics