Equipment information
Siemens K1404 Communications Test Set
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Siemens K1404 ?
If you have any other manuals for the
Siemens K1404 you can upload the files here .
Model:
K1404
Date:
1997
Category:
Group:
Description:
ISDN U Analyzer
Information
About K1404
The ISDN-U-Analyzer K1404 by Siemens is a measuring device
which allows you to perform measurements at the ISDN-U
interface. You can activate both the ISDN component Network
Terminator (NT) and the ISDN component Line Terminator (LT),
and observe the operation set-up of layer 1.
It is possible to measure the electrical characteristics as
well as the power feeding behaviour of the 丨SDN components.
Functonal tests and jitter measurements can also be carried out.
K1404 offers all test options defined by the CCiTT G961,
ANSI T1.601, ETSI ETR 080 and FTZ 1TR220 guidelines.
ISDN-U-Analyzer K1404 is a compact Test Set which combines
in a single unit all the modules, signals, auxiliary signals
and analyzers required for performing measurement tasks. The
functions of the individual modules of the K1404 are
coordinated by means of a powerful processor. Each module
ist controlled by its own microcomputer and is suited for a
number of different measuring tasks.
K1404 features a built-in, complete selective measuring
station with a frequency range of 500 Hz to 1 MHz‘ An exact
analysis of the power spectrum density of the U signals is
possible via selectable bandwidths (25 Hz or 2 kHz). The
selective measuring device also suDDorts the device-internal
measuring bridges which are necessary for the determination
of return loss and longitudinal unbalance at the U Interface.
The transmission quality during operation can be determined
via the display of a pseudo random signal. The display of
specific bit errors is of course possible In addition, power
feeding characteristics may be analyzed using extensive
variation possibilities.
You may operate the ISDN-U-Analyzer K1404 either locally via
menu or via remote control. An infrared touch-panel and a
clearly structured menu guidance allow for easy operation in
all measuring tasks. Functions and parameter settings are
selected by simply touching the selection windows on the
display.
The electroluminescent display with 256x512 丨mage points
allows you to display the results in either graphic or
alphanumeric form. In the case of a graphic display, you can
fade in tolerance lines. The measured resuits are evaluated
such that no further processing is required. The displayed
result structures can be printed and thus documented.
Remote control of the ISDN-U-Analyzer K1404 is effected via
the built-in I EC bus (IEEE 488.2).
Due to its low total weight and its compact dimensions, the
K1404 is easy to transport, A special transport case is
available for safe transport.
Manual Type:
User Manual
Pages:
330
Size:
11.30 Mbytes (11851732 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
1997 05 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 12 17
MD5:
db6cf353daad6a38e65ae6c888d2a393
Downloads:
538
Information
The present user manual contains a description of the
ISDN-U-Analyzer K1404 as well as operating instructions for
this device. Knowledge of the technical applications is
prerequisite.
The introductory section which you are reading at present
introduces the most important features of K1404. Please make
sure to note the safety information at the end of this
introduction.
Section 2, "Device Description" describes the hardware of
the K1404. In section 3 i!Start-up Preparations'1 you will
learn how to make K1404 ready for use. Chapter 4 "Basic
Functions" introduces the operating unit of K1404; it also
tells you how measured results are loaded or saved.
Sections 5 through 8 introduce the various measuring modes
that are possible with the K1404. Here, the relevant
parameter settings for each measuring mode as well as the
corresponding test set-ups and result structures are described.
Section 9,"Remote Control Operation" will tell you how to
operate the K1404 via commands.
in the "Appendix" you will find the technical data of the
K1404 and the installation of the V.24 printer Interface is
described, Here, you will also find a listing of the service
offer as well as maintenance information.